REPAIR MAINT OF INTERNAL ELECTRIFICATION AND ALLIED WORKS IN ACCN AT GRD GHOOM AND ASCON NODE AREA UNDER AGE I DARJEELING

Amount

Taking down carefully existing old unserviceable Copper/Aluminium Point Wiring (Light, Fan, Socket or Power) of any description on batten/conduit (Serviceable Fittings such as Switches, Ceiling Roses, Pendants, Fan Regulators, Sockets, etc. to be kept in safe custody for reuse) and making good disturbed surfaces of Ceiling, Walls, etc. with Cement Morter 1:3 and treating the surfaces so as to match the existing Finishes complete all as specified and as directed.

Taking down old unserviceable/burnt Submain Wiring with copper /aluminum conductor PVC insulated cable of any size drawn through PVC Casing Caping/Conduit including GI Wire Accessories etc. and making good disturbed surfaces of Walls, Ceiling, etc. so as to match the existing Finishes, complete all as specified and as directed.

M&L for Point Wiring with 1.5 Sqmm Copper Conductor single core PVC insulated FRLSH unsheathed 1100 Volt grade multi-stranded Cable drawn through and including PVC Casing & Caping of suitable size and its Accessories such as Elbow, bends, junction boxes, PVC surface box (ISI mkd), saddles and screws and rawalplug etc on Wall, Ceiling, mounted including PVC insulated FRLSH unsheathed single core multi-stranded Copper Conductor Cable of size 1.5 Sqmm Green in Colour as Earth Continuity Conductor connected to Common Earth and Earth dolly for One Light/ Fan/ Bell Point controlled by One 1-Way Switch 5 Amp, complete all as specified and as directed.

All as per Item no 03 here-in-above, but for One Socket outlet of 3/5 Pin, 5/6 Amp on Same Board, complete all as specified and as directed.

All as per Item no 03 here-in-above, but for One Socket outlet of 3/5 Pin, 5/6 Amp on Independent Board, complete all as specified and as directed.

All as per Item no 03 here-in-above, but wiring with 2.5 Sqmm Copper Conductor for One Socket outlet of 3/5 Pin, 15/16 Amp on Independent Board, complete all as specified and as directed.

All as per Item no 03 here-in-above, but wiring with 2.5 Sqmm Copper Conductor for One Socket outlet of 3/5 Pin, 15/16 Amp with Two socket outlet of 3/5 pin, 5/6 Amp on Independent Board, complete all as specified and as directed.

S&F Switch Piano, Flush type, Single Pole, 1-Way, 5 Amps, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Socket Outlet 2-in-1, Flush type, multi-purpose, 2/3 Pin, 5/6 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Switch Socket Combination 2-in-1, Flush type, multi-purpose, 5 Pin, 5/6 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Switch Socket Combination 2-in-1, Flush type, multi-purpose, 5/6 Pin, 15/16 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Ceiling Rose, Surface Bakelite of size 65x50mm, 3 Terminals, AC, 50 Hz, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Bell push, flush type, 5 Amp, 240 volt complete all as specified and as directed.

S & F Bell Ding-Dong AC 240 V Single Pole complete all as specified and as dircted.

S&F in-repair Switch Piano, Flush type, Single Pole, 1-Way, 5 Amps, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F in-repair Modular Socket Outlet 2-in-1, Flush type, multi-purpose, 2/3 Pin, 25 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed. MAKE- Legrand of Cat part no- 6730 47 or equivalent of make Anchor/L&T/ Havells

S&F in-repair Switch Socket Combination 2-in-1, Flush type, multi-purpose, 5 Pin, 5/6 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F in-repair Switch Socket Combination 2-in-1, Flush type, multi-purpose, 5/6 Pin, 15/16 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F in-repair Bell push, flush type, 5 Amp, 240 volt complete all as specified and as directed.

S & F in-epair Bell Ding-Dong AC 240 V Single Pole complete all as specified and as dircted.

S&F in-repair Ceiling Rose, Surface Bakelite of size 65x50mm, 3 Terminals, AC, 50 Hz, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F in-repair PVC surface box, 2-Module with cover plate and frame, complete all as specified and as directed. Cat part no 6733 02 & 6732 42 of Make Legrand or equivalent of Make- Havells/Anchor/Bajaj

S&F in-repair motor starter for geyser of capacity 16A, 240 Volt,AC, complete all as specified and as directed. Cat part no 6730 30 of Make Legrand or equivalent of Make- Havells/Anchor/Bajaj

M&L Sub-main Wiring with 2-Runs of Single Core 6.0 Sq mm PVC insulated FRLSH multi-stranded 1100 Volts grade with Copper Conductor drawn through and including Non-metalic Rigid PVC Casing capping ISI marked and its Accessories including 1-Run of Single Core 4.0 Sq mm PVC insulated FRLSH unsheated multi-stranded 1100 Volts grade with Copper Conductor Cable as Earth Continuty Conductor along with the Wiring and connected from DB to DB/Main Board, complete all as specified and as directed. NOTE :- (a) Cost of PVC Casing capping with all Fittings/Accessories will deem to be included in the quoted UNIT RATE. (b) Cables as mentioned in SCHEDULE ‘A’ Items and 1-Run of PVC Casing capping with all Fittings/Accessories will be measured and paid as ONE UNIT. (c) Sub-main Wiring will be measured PVC Casing capping only. Wire required for looping, etc as ordered will deem to be included in the quoted UNIT RATE.

M&L Sub-main Wiring with 2-Runs of Single Core 4.0 Sq mm PVC insulated FRLSH multi-stranded 1100 Volts grade with Copper Conductor drawn through and including Non-metalic Rigid PVC Casing capping ISI marked and its Accessories including 1-Run of Single Core 2.50 Sq mm PVC insulated FRLSH unsheated multi-stranded 1100 Volts grade with Copper Conductor Cable as Earth Continuty Conductor along with the Wiring and connected from DB to DB/Main Board, complete all as specified and as directed. NOTE :- (a) Cost of PVC Casing capping with all Fittings/Accessories will deem to be included in the quoted UNIT RATE. (b) Cables as mentioned in SCHEDULE ‘A’ Items and 1-Run of PVC Casing capping with all Fittings/Accessories will be measured and paid as ONE UNIT. (c) Sub-main Wiring will be measured PVC Casing capping only. Wire required for looping, etc as ordered will deem to be included in the quoted UNIT RATE.

M&L Sub-main Wiring with 2-Runs of Single Core 2.5 Sq mm PVC insulated FRLSH multi-stranded 1100 Volts grade with Copper Conductor drawn through and including Non-metalic Rigid PVC Casing capping ISI marked and its Accessories including 1-Run of Single Core 1.5 Sq mm PVC insulated FRLSH unsheated multi-stranded 1100 Volts grade with Copper Conductor Cable as Earth Continuty Conductor along with the Wiring and connected from DB to DB/Main Board, complete all as specified and as directed. NOTE :- (a) Cost of PVC Casing capping with all Fittings/Accessories will deem to be included in the quoted UNIT RATE. (b) Cables as mentioned in SCHEDULE ‘A’ Items and 1-Run of PVC Casing capping with all Fittings/Accessories will be measured and paid as ONE UNIT. (c) Sub-main Wiring will be measured PVC Casing capping only. Wire required for looping, etc as ordered will deem to be included in the quoted UNIT RATE.

S&F in-repair of Sheet Metal Enclosure MCB DB TPN, 4 way 415 volt, with rated Bus-bar, Single door type MCB DB suitable for mounting incoming and outgoing MCBs triple pole/ single pole complete all as specified and as directed. Make of DB- Legrand of cat part No 5076 60 or Equivalent in L&T/ Schneider/ Havells

S&F in-repair of Sheet Metal Enclosure MCB DB SPN, 12 way 240 volt, with rated Bus-bar, Single door type MCB DB suitable for mounting incoming and outgoing MCBs double pole/ single pole complete all as specified and as directed. Make of DB- Legrand of cat part No 5076 02 or Equivalent in L&T/ Schneider/ Havells

S&F in-repair of Sheet Metal Enclosure MCB DB SPN, 8 way 240 volt, with rated Bus-bar, Single door type MCB DB suitable for mounting incoming and outgoing MCBs double pole/ single pole complete all as specified and as directed. Make of DB- Legrand of cat part No 5076 01 or Equivalent in L&T/ Schneider/ Havells

S&F MCB Single Pole & Neutral (SPN), 'C' Curve,40 Amps, 240 Volt for fixing on MCB DB’s, 10 kA, 50 Hz, conforming to IS/IEC 60898 and connecting up, complete all as specified and as directed. Make of MCB SPN 40 Amps Legrand cat part No 4086 18 or Equivalent in L&T/ Schneider/ Havells

S&F MCB Single Pole (SP), 'C' Curve, 6 to 32 Amps, 240 Volt for fixing on MCB DB’s, 10 kA, 50 Hz, conforming to IS/IEC 60898 and connecting up, complete all as specified and as directed. Make of MCB 6 to 32 Amps Legrand cat part No 408587 to 408595 or Equivalent in L&T/ Schneider/ Havells

S&F MCB Single Pole (SP), 'C' Curve, 40 Amps, 240 Volt for fixing on MCB DB’s, 10 kA, 50 Hz, conforming to IS/IEC 60898 and connecting up, complete all as specified and as directed. Make of MCB 40 Amps Legrand cat part No 4085 96 or Equivalent in L&T/ Schneider/ Havells

S&F in-repair of MCB Four Pole (FP), 63 Amps, 415 Volts, 10KA, 50 Hz, conforming to IS/IEC 60898 and connecting up, complete all as specified and as directed. Make of MCB FP- Legrand cat part No 4087 02 or Equivalent in L&T/ Schneider/ Havells .

S&F in-repair of MCCB Four Pole (FP), 100 Amps, 415 Volts, 16 kA, 50 Hz, conforming to IS/IEC 60898 with with Sheet Metal Enclosure for MCCB FP and connecting up, complete all as specified and as directed. Make of MCCB FP enclosure and MCCB FP- Legrand cat part No 5078 01 & 4200 15 or Equivalent in L&T/ Schneider/ Havells

S&F in-repair Wall mounted LED 25 Watts (4 Feet), Box type (Decorative) Light Fitting with extruded Aluminium Heat Sink provided for Efficient Heat Dissipation, 240 Volts, complete with all Accessories internally pre-wired and necessary mounting arrangements, with and including of new 2 Core multi-stranded Copper Conductor of size 0.5 Sqmm from Ceiling Rose to Fitting including LED Tube 4'x25 Watts, complete all as specified and as directed. Make- PHILLIPS, Cat Part No.- BN 021 LED25S 6500PSU GR S1 or Equivalent of Make BAJAJ/HAVELLS/CROMPTON GREAVES.

S&F in-repair Wall mounted LED 10 Watts (2 Feet), Box type (Decorative) Light Fitting with extruded Aluminium Heat Sink provided for Efficient Heat Dissipation, 240 Volts, complete with all Accessories internally pre-wired and necessary mounting arrangements, with and including of new 2 Core multi-stranded Copper Conductor of size 0.5 Sqmm from Ceiling Rose to Fitting including LED Tube 2'x10 Watts, complete all as specified and as directed. Make- PHILLIPS, Cat Part No.- BN 021 LED10S 6500PSU GR S1 or Equivalent of Make BAJAJ/HAVELLS/CROMPTON GREAVES.

S&F in repair inverted pyramid tripod type LED Bollard decorative light fitting of 10 watt with driver and of IP-65 protection, including providing necessary P.C.C. (1:2:4) block for mounting to base, complete all as specified and as directed by Engr -in- charge. Make : Crompton Greaves, Cat Pt No-LBLSN-10-CDL or equivalent model of Philips/Bajaj/Havells

S&F in repair sleek LED Bulk head fitting 13.5 watt complete all as specified and as directed by Engr -in- charge. Make : Havells, Cat Pt No-LHEXCGP7IN5W013 or equivalent model of Philips/Bajaj/Crompton Greaves

S&F Energy saving new generation environmental friendly long life versatile presure die cast aluminium housing IP 66 building security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 30 watts with pre wired and lens embedded PC cover having Top opening seperate driver compartment and necessary mounting arrangements, including taking down old unserviceable light fitting, complete all as specified and as directed. CAT No.- ENDURAPEARLSL30WLED757SASYTOPCMP of Make HAVELLS or equivalent of make BAJAJ/PHILLIPS/CROMPTON GREAVES

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to galvanized iron or steel earth lead wire 4mm dia size by mean of nut/bolt and washer of galvanized iron or steel as shown in electrical plate no 3 of SSR part I including necessary excavation and earth work GI pipe 20mm dia light grade for watering and GI 15mm dia light grade pipe for protection of GI earth wire etc, PCC chamber with PCC cover in cement concrete 1:2:4 Type B1(20mm graded aggregate), funnel, wire mesh, charcoal dust, salt etc, connected to DB as indicated including testing complete all specified and as directed.

Supply installation commissioning and testing in-repair of wall mounted cubical type LT Feeder Pillar Box of Suitable size factory made totally enclosed, dust and vermin proof, duly fabricated and having proper locking arrangement and painted with powder coating paint and mounted on wall by means of MS clamp ans nut-bolts. Outgiong:- 4 Way Double door 'G' Frame Panel Boards, O/G Four Pole (FP) MCCB's G-Frame, 250 A "AA" Frame, HSN Code: 8537, complete all as specified and as directed conforming to Cat No.- IHVGF2500400 of Havells, comprises of the following:- (a) Internal wiring with single core copper conductor cable/ PVC Insulated Copper Strip of suitable size incoming to bus bar and bus bar to outgoing MCCB/MCB INCOMING : (b) MCCB FP 160 Amps, 415 Volts, Breaking capacity 25KA- 01No (Cat No.- IHLANF0160 of make Havells) OUTGOING : (c) MCCB FP 100 Amps, 415 Volts, Breaking capacity 25KA- 02No (Cat No.- IHLGHF0100 of make Havells) (d) MCCB FP 63 Amps, 415 Volts, Breaking capacity 16KA- 02Nos (Cat No.- IHLGNF0063 of make Havells)

GEETA CONSTRUCTION

RAI CONSTRUCTION

M/S TSHERING BHUTIA

Janata Enterprises