8702/E8 REPAIR TO CHAJJAS, RCC MEMBERS, PLINTH PROTECTION, SUNKEN FLOORS, FLOORING, ANTI TERMITE TREATMENT, JOINERY AND PLUMBING WORKS OF MD AND OTM ACCN AT NAD SUNABEDA, ODISHA

Amount

Taking down cement plaster on brick or concrete or stone wall surfaces including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed by Engineer-in-charge

M&L for 15mm thick rendering in two layer on fair faces of brick masonry or concrete surfaces of walls consisting of 1st layer of 10mm thick plaster in CM (1:6) and 2nd layer (setting coat or top layer) of 5 mm thick plaster in CM (1:4) mixed with water proofing compound (ISI marked) @ 3% by weight of cement or as per manufacturer’s instructions, finished fair & even, complete, all as specified. Note : - Supply only water proofing compound shall be measured and paid for separately.

M&L for rendering 10mm thick in cement mortar (1:6) on internal faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement, complete all as specified & directed.

M&L for rendering 5mm thick in cement mortar (1:6) on ceiling of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement, complete all as specified & directed.

M&L for preparation of new undecorated plastered/concrete surfaces of walls by rubbing down and applying two coat of weather proof Acrylic emulsion paint (exterior grade) of Ist quality (Apex ultima of Asian paint or Weather Coat Smooth of Berger or equivalent from Nerolec) over and including one coat of weather coat primer, complete, all as specified and directed by Engineer-In-Charge.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

Material and labour preparation of newly plastered/asbestos cement surfaces of ceilings & applying three coats of white wash complete all as specified.

Material and labour 75 mm thick PCC (1:3:6) type C2 using 40 mm graded stone aggregate as in path, plinth protection, surface finished fair and even complete all as specified.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge.

M&L screed bed or bedding layer of cement mortar (1:6), 15mm thick for laying floor finishes etc complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 10mm thick in cement plaster (1:4) on surface of brick masonry or concrete surfaces for fixing tiles/stone slab etc, finished fair & even complete all as specified.

M&L for Non skid Ceramic coloured /printed 7 to 8 mm thick (square rectangular) area of each the exceeding 0.06 Sqm but not exc 0.11 Sq m laid as in floors, setting and jointed with cement slurry over and pointed with coloured cement to match with surfaces of tiles complete all as specified and as directed by Engineer-in-charge .

M&L for Glazed ceramic tiles coloured /printed tiles of size 450mmx350mm / 350mmx250mm x 6 to 7 mm thick setting & jointed with neat cement slurry as in dado, skirting etc and pointed with coloured cement to match with surface of tiles complete all as specified and as directed.

M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L for non skid ceramic tiles (coloured) 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over complete all as specified & directed.

M&L for 18 to 20mm thick Granite (of any type) slab of approved shade as in flooring, platform etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of Granite stone including cutting, grinding and polishing (mirror polish i.e. full granite polish as per local trade practice) complete, all as specified & directed.

Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the wooden shutters from the frame) including cutting holes for hold fasts complete all as specified.

Taking down chowkat or frame with shutters area not exc. 1.5 Sqm each (without taking off the wooden shutters from the frame) including cutting holes for hold fasts complete all as specified

Taking down of shutters of any description not exceeding 1.00 Sqm each including iron mongery complete all as specified

Taking down shutters of any description exc 1 Sqm and not exc. 2 Sqm each complete all as specified.

M& L for 2nd class hard wood as in plain solid, straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed by Engineer-in-Charge.

M & L for factory made, 35mm thick glazed and Skelton shutter of 2nd class hard wood open rebated and prepared to receive glass, gauge etc (with out shash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, size of members of shutter as specified in SSR Part-I (2009) section 8-24(a), chemically treated and fitted to chowkhat complete all as specified and as directed by Engineer-in-Charge.

S&F Factory made style plain framed, panelled shutters, 35 mm thick of second class hard wood (Hollock) (any numbers of panels) with panels of 12 mm thick veneered particle board exterior grade medium density with commercial veneering on both faces with sheesham wood beading all round the panel made out of 20 by 15 mm, on one side and fitted to chowkhats complete all as kiln seasoned and chemically pressure treated specified and directed.

S&F Factory made style plain framed, panelled shutters, 30 mm thick of second class hard wood (Hollock) (any numbers of panels) with panels of 12 mm thick veneered particle board exterior grade medium density with commercial veneering on both faces with sheesham wood beading all round the panel made out of 20 by 15 mm, on one side and fitted to chowkhats complete all as kiln seasoned and chemically pressure treated specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour sheets for top rail lock rail bottom rail on either side and as gap insert for Top rail and bottom rail paneling of plain colour PVC sheet to fitted on the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube in opening & edges shall be painted to match with printed sheet as per specifications inluding making good the disturbed surface to match the existing for toilet complete al as specified and directed by Engineer-in-Charge.

S&F 3mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in square n. exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as in repair complete all as specified.

S&F as in repairs curtain rod of 18mm dia, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified & as directed.

M&L for 18/19mm thick solid core vennered particle board, interior grade, with decorative face veneers on one face fixed with screws to frame work as in pelmet boxes, shelves, kitchen cabinets etc as in repair complete all as specified & as directed.

M & L for 300mm long MS helical door tail pattern springs ISI marked, incl roller and roller plate and fixed as in repair complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing butt hinges of size 100mm medium weight, cold rolled mild steel ISI marked complete all as specified and directed.

Supply & fixing butt hinges of size 75mm medium weight, cold rolled mild steel ISI marked complete all as specified and directed.

S & F 200mm long aluminium anodized barrel tower bolts of extruded section and fixed to shutter complete all as specified and directed by Engineer-in-charge

S & F 150mm long aluminium anodized barrel tower bolts of extruded section and fixed to shutter complete all as specified and directed by Engineer-in-charge

S & F 100 mm long Aluminium handles, cast type, anodised complete all as specified and directed by Engineer-in-charge

S & F 125 mm long Aluminium handles, cast type, anodised complete all as specified and directed by Engineer-in-charge

S & F 150 mm long Aluminium handles, cast type, anodised complete all as specified and directed by Engineer-in-charge

Supply and fixing 250 mm long mild steel sliding door bolts clip type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, ISI marked complete all as specified.

M&L for Preparation of new wooden surface, of any description not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint (Ist quality) over a coat of pink primer complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint, complete all as specified & directed.

Taking down and Re-fixing of serviceable shutters of any description but exc 1 sqm and n.exc 2 sqm each in the same opening after easing/adjusting including renewal of unserviceable screws complete all as specified and directed by Engineer-in-charge.

Resecuring or easing & adjusting, without taking down shutter of any description exc 1 sqm and not exc 2 sqm each each all as directed.

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish to a distance n exc 1.50Km complete all as specified and directed.

M&L for 10mm thick rendering in cement mortar (1:4) on internal surface of brick work or concrete surfaces of walls, finished the surface even & smooth without using extra cement, complete, all as specified and directed by Engineer-In-Charge.

(a) Applying evenly compactible primer @ 0.4 litre per Sqm over concrete / plastered roof surfaces. (b) Applying a tack coat of industrial bitumen 85/25 grade (ISI marked) @ 1.20Kg/Sqm (c) Laying of APP based polymeric water proof membrane sheet of weight not less than 3.0 kg/Sqm and thickness not less than 3mm, reinforced with polyster non wove fabric (wt not less than 150 gms/Sqm) with minimum longitudinal end over laps of 100mm and horizontal side laps of 75mm and joints shall be finally thermo-fused with help of LPG flames, land on primed surface by forced application complete all as specified and directed by Engineer-in-Charge. Make of membrane sheet :- Make- Sika/ Poly plast superior felt /Hyper Plast/Bengal Bitumen/STP. Note : -- (i) Membrane sheet also laid along the parapet upto 30cm height & inserted inside the groove & laid over a coat of bitumen as specified here-in-before. The groove shall be closed with CM (1:3 ) mortar Nothing extra shall be admissible on this account (ii) WPC shall be measured & paid under specified item of this Schedule. Nothing shall be entertained on this account. (iii) Contractor shall submit guarantee for 10 years from the date of completion of work. (iv) The amount against guarantee period for roof treatment shall be retained from the contractor's dues or contractor may furnish a fixed deposit receipt in favour of GE as issued by Nationalize Bank. (v) Amount of security deposit against the guarantee period for roof treatment shall be calculated as per the scales laid down for calculating Individual Security from total amount of roof treatment work.

M&L for PCC (1:2:4) type B1 using 20 mm graded crushed stone aggregate in platform over roof bedding, roof kerbs or mud stops, complete all as specified and directed.

M & L for PCC (1:5:10) type E-2, using 40mm graded stone aggregate as in sunken floor, surface finished fair & smooth complete all as specified and as directed by Engineer-in-Charge.

M & L for 30mm thick PCC (1:2:4) type B-0, using 12.5mm graded stone aggregate mixed with WPC as per manufacturer instructions as in sunken floor, surface finished even & fair without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Supply only integral water proofing compound (ISI marked).

M & L for High density polyethylene pipes (HDPE) of pressure of size 40mm bore, rating 6 kgf/cm2 laid in trenches complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified.

Supply and fixing PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle as in repair complete all as specified

S&F in repairs 15 mm bore bib tap, cast copper alloy, fancy type with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified & directed.

S&F in repairs 15mm bore stop valve, chromium plated (concealed) cast copper alloy, screwed down, high pressure with crutch or butterfly handle with long shank and cup for iron pipe or for unions complete all as specified and directed by Engineer-in-charge.

Supply and fixing PVC connection 450 mm long suitable for 15 mm bore GI pipe including brass check nuts and union etc as in repairs complete all as specified.

S&F pillar taps, cast copper alloy with capstan heads chromium plated, screwed down high pressure, with or without lettered “Hot” or “Cold” with long screwed shanks and fly nuts, screwed for 15mm bore iron pipe and fixed as in repair complete all as specified and directed by Engineer-in-charge.

Supply and fixing 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors as in repairs complete all as specified.

Supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors as in repairs complete all as specified.

S&F in repair 75mm bore PVC(SWR) junction double (double T) equal or unequal with access door complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 110mm bore PVC(SWR) junction double (double T) equal or unequal with access door complete all as specified and as directed by Engineer-in-Charge.

S&F for 75mm bore PVC(SWR) bends any radius as in repair complete all as specified and as directed by Engineer-in-Charge.

S&F for 110mm bore PVC(SWR) bends any radius as in repair complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 75 mm bore PVC (SWR) vent cowl as in repair complete all as specified.

Supply and fixing 110 mm bore PVC (SWR) vent cowl as in repair complete all as specified.

S & F 500 liters rotational moulded polyethylene water storage tank, double layered (cylindrical vertical with closed top cover) as per IS-12701-1996, hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I including dismantling of old existing water tank and removing from site complete all as directed by Engineer- in -charge. Make :- Sintex/Polywell/Polycon

S & F 1000 liters rotational moulded polyethylene water storage tank, triple layered (cylindrical vertical with closed top cover) as per IS-12701-1996, hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I including dismantling of old existing water tank and removing from site complete all as directed by Engineer- in -charge. Make :- Sintex/Polywell/Polycon

S&F vitreous china wash hand basin white flat back of size 630 mm x 450 mm including a pair of cast ironcantilever brackets of size 40x40x5mm embedded in PCC (1:3:6) type C-1 with & including 32 mm dia PVC waste pipe and 32mm chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed as in repairs complete all as specified.

M&L for reinforced cement concrete (1:1.5:3) (Nominal Mix), type B1 using 20mm graded crushed stone aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, including neccessary formwork & demolition and removing of existing reinforced cement concrete complete, all as specified and directed by Engineer-in-charge.Note :- Reinforcement shall be measured and paid for separately.

M&L for reinforced cement concrete (1:2:4) (Nominal Mix), type B1 using 20mm graded crushed stone aggregate chajjas and the like, including neccessary formwork complete, all as specified and directed by Engineer-in-charge.Note :- Reinforcement shall be measured and paid for separately.

M&L for Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending, spirally for hopping for columns, hooking ends, and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality Fe-500 conforming to IS -1786-1985 complete all as specified and as directed by Engineer-in-charge.

M&L for providing and injecting chemical emulsion for post construction antitermite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling 12mm dia holes upto 300mm deep and 300mm c/c inluding plugging holes etc. in apron complete all as specified and as directed by Engineer-in-charge.

M&L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed by Engineer-in-charge.

Taking down to 15mm bore steel tubing and connection including cleaning for re-fixing or remove from site complete all as directed by Engineer-in-Charge

All as per serial item No.74.00 here-in-above but 20mm bore

All as per serial item No.74.00 here-in-above but 20mm bore

S & F for 15mm bore steel water tubing medium grade, galvanised with all fittings and fixture fixed & concealed in wall/ceiling or laid in floors complete all as specified and directed by Engineer-in-charge.

All as per serial item No.77.00 here-in-above but 20mm bore

All as per serial item No.77.00 here-in-above but 20mm bore

M/s Jai Sree Hari

VARADHI ENTERPRISES