Construction of Veterinary Dispensary Building at Standli Tehsil Kotkhai District Shimla (H.P) Construction of building portion, W/S and S/I, Site development septic tank, boundary wall etc.

Excavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the engineer -In-charge at site., according to the HP.PWD. specification of 1990 (one thousand nine nundred ninety) volume-1 (one) and scrting out useful and unuseful material and transportation of the Junuseful material for disposing at durmping site (To be arranged by the contractor) as per salisfaction of Engineer- in-charge through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentais necessary to complete the work by mechanical means and labour (if required). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used /removed as per the direction of the Engineer-in-charge. Any loss to the public and private propriety during the course of exertion and disposal of serviceabie and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duty comaerisated by him in all respect including all incidental charges.

Providing and laying cement conrete 1. 6. 12 (One cement: Six sand: twelve crushed stone aggregate 40mm (Forty milimetre) nominal size) mechnically mixed and curing complete excluding the cost of form work in foundation and plinth including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD.specifications of 1990 volume-l and as per direction of Engineer-in-charge.

Boulder filling tightly hand packed under floor including watering, ramning, consolidating etc, complete including carriage of material in all leads and lifts

Random rubble masonary/ polygon ruble mesonary (uncoursed brought to courses) with hard stone of approved quality in foundation and plinthi in cement morter 1:6 (1 cement: 6 sand)

Providing and laying damp proof course 38 mm thik cement concrete 1.2.4 (1) cement: 2 Sarid: 4 graded stone aggregate 20mm nominal size) and curing comipete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-l and as per direction of Engineer-in-Charge

Applying a coat of hot bitumen Of per square metre of floor area before laying cement concrete including roughening, cleaning of the

Providing and laying brick work using common burnt clay building brick in Cement Mortar 1:6 (One cement:Second sand) Second class bricks in super structure for all floors and heights including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-Charge.

Providing and laying second classs half brick masonry in common burnt clay building bricks in foundation and plinth level in Cement Mortar 1:4 (One cement: Four sand) including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-l and as per direction of Engineer-in-charge.

Providing form work with steel plates 3.15mm. (Three point fifteen milimetre) thick welded with angle iron in frame 30X30mmx5mm. (Thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden/ steel battens and ballies, height of propping and centring below supporting floor to ceiling to any floor height and removal of the same for in situ-reinforced concrete and plain concrete work and as per HP. PWD. specifications of 1990 volume-l including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in-Charge.

In flat surfaces such as soffits of suspended floors, roofs, landings and the like of any thickness in all floor level in all heights.

Beams, Cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels in all floor level in all heights.

Edges of slabs and break in floors and walls in any depth/width.

Providing and laying cement concrete 1:2:4 (1 cement: 2 Sand: 4 graded stone aggregate 20mm nominal size) and curing comipete excluding cost of form work and reinforcement forreinforced in Suspended floors and the like including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-l and as per direction of Engineer-in-Charge

Providing Tor/TMT steel reinforcement of TATA Tiscon/SAIL/Rashtria Ispat incluiding cost of binding wire for R.C C. work including cutting, bending, binding and placing in position complete in all floor levels in all heights including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-Charge.

Providing wood work in frames of doors, windows, clerestory, windows, clerestory, windows and other rames wrought, framed and fixed in position.2nd class d/wood

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows.including black enamelled iron butt hinges with necessary screws.40mm thick

Providing and fixing 40 mm thick wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85G with wire of dia 0.56mm made of second class devodar wood doors, windows and clerestory windows including first class deodar wood including bright finished black enamelled iron butt hinges with necessary screws including all leads and lifts :-

Providing and fixing M.S sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws and nuts etc. complete including carriage of materials through all modes of transportations with in all leads and lifts and as per HPPWD specification 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge

250x16mm (Two hundred fifty into sixteen millimeter)

Providing and fixing aluminium tower bolts (Berrel type) anodized transparent or dyed to required shade and colour with screws etc. complete including carriage of materials in all leads and lifts:-

Providing and fixing aluminium handles anodized transparent or dyed to required colour or shade with necessary screws etc. complete.

40 mm thick cement concrete flooring 1:2:4 (1 cement: 2 sand:4 grade stone aggregate 20mm nominal size

cement plaster skirting with CM 1:3 in complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through ali modes of transportion within all leads and lifts and as per HP.PWD. specifications of 1990 volume-i, as per direction of Engineer-in-Charge.

Providing and fixing glass strips in jointscomplete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per HP.PWD. specifications of 1990 volume-1,as per direction of Engineer-in-Charge.

Providing in RCC work smooth finishing of exposed surfaces with cement morter 1:3 (1 cement: 3 sand) complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in-Charge:-

15mm (fifteen milimetre) cement plaster in single coat on rough side of brick/ concrete/stone walls of interior plastering upto floor two level including arrises, internal rounded angles, chamfers & rounded angles not exceeding 80mm in (eighty milimetre) grith finished even and smooth in cement mortar 1:6 (One cement: six approved sand) as per HP.PWD., specification volume-I (one)including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

15mm (fifteen milimetre) cement plaster in single coat on fair side of brick/ concrete/stone walls of interior plastering upto floor two level including arrises, internal rounded angles, chamfers & rounded angles not exceeding 80mm in (eighty milimetre) grith finished even and smooth in as per HP.PWD., specification volume-I (one)including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

cement mortar 1:6 (One cement: six approved sand)

Providing wood work in frames of false ceiling and other frames wrought, framed and fixed in position.2nd class deodar wood

Providing and fixing plain asbestos cement sheet ceiling 6mm as per HP. PWD. specifications of 1990 volume I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in-Charge.

Providing and fixing square edged cover fillets(beading) 40mm x 12mm section, with wood screws in ceiling and lining including mitring at junctions (a) Ist class deodar wood. including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.

10mm (fifteen milimetre) cement plaster in single coat on fair side of brick/ concrete/stone walls of interior plastering upto floor two level including arrises, internal rounded angles, chamfers & rounded angles not exceeding 80mm in (eighty milimetre) grith finished even and smooth in as per HP.PWD., specification volume-1 (one)including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as pèr entire satisfaction of the Engineer-in-Charge.

cement mortar 1:3 (One cement three approved sand)

Applying priming coat over new wood & wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt & other foreign matter, sand papering & knotting ready mixed paint

Painting two coats (excluding priming coat) on riew wood & wood based surface with enamel paint to give an even shade including cleaning the surface of dirt, dust & other foreign matter sand papering & stopping with enamel paint other than white as per HPPWD specification 1990 Volume-I (one) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Wall painting (two coats) with arcylic/premium emulsion paint of approved brand and manufacture for interior grade on undecorated on crete / stone / plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface complete as per HP. PWD. specifications of 1990 volume- I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in-Charge

Distempering two coats with Ist quality oil bound washable distemper of Asian paints or equivalent of approved shade and manufacture and of required shade on undecorated ceiling/ slopping surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer for all floors including entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge.

Providing under layer for plinth protection of 75mm thickness with dry bricks complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per HP.PWD. specifications of 1990 volume-l,as per direction of Engineer-in-Charge.

Providing plinth protection 50mm thick in cement concrete 1:3:6 per HP. PWD. specifications of 1990 volume- I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in-Charge.

Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws.Plain grill.

Providing and fixing M.S.round holding down or anchor bolts with nuts and washer plates complete. through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing steel work of TATA SALT or RASHTRIYA ISPAT welded in built up sections/hollow section in trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint complete as per HP.PWD., Specifications of 1990 volume-i includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in- Charge.

In trusses and trussed purlings in buildings

Providing and fixing 0.60mm (Zero point six zero milimeter) thick prepainted steel sheet of TATA DURASHINE in roofing with hot dipped metalic zinc coated sheet with top coat of regular m.odified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per HP. PWD. specifications of 1990 volume-l including carriage of materials, labour, tool and plant, through all modes of transportation within all leads and lifts and as per direction of Engineer-in-Charge.

Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets of TATA Durashine in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5

Painting two coats (excluding priming coat) on new steel & other metal surface with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust & other foreign matters with other then white as per HPPWD specification 1990 Volume-1 (one)including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Excavation in drains and channels etc.in earth work including dressing of sideand bed and disposing of excavated earthupto a lead of 20 metres and lift upto1.50 metres disposed earth to belevelled and neatly dressed including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge

Providing & fixing to wall ceiling and floor galvanised mild steel tubes ( medium grade) tube fitting and clamps including making good the wall , ceiling floor complete including all leads and lifts as per direction of the Engineer-in-Charge 25 mm nominal bore

15 mm nominal bore

Providing & laying in trenches galvanised mild steel tubes ( heavy grade) tube fitting ( earth work in trenches to be measured and paid separately complete. including all leads and lifts as per direction of the Engineer-in-Charge.20 mm nominal bore

Making connection to galvanised steel distribution branch with galvanised mild steel main 20mm to 40mm nominal bore by providing and fixing tee including cutting and treading the pipe complete. including all leads and lifts as per direction of the Engineer-in-Charge

Fixing water meter stop-cock in GMS tube i/c necessary fittings such as mild steel galvanished jam nut .sockets etc. complete cutting and making long screws (water metre and stop cock to measured and paid for separately) 25mm nominal bore including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Constructing water collection chamber 300x300x650mm (three hundred into (three hundred into six hundred fifty millimetre) in side size for collection of water with cement concrete slab 1:2:4 (one cement : two sand : four graded stone aggregate 20mm (twenty millimeetre) nominal size) 75mm (seventy five millimetre) thick foundation concrete 1:5:10 (one cement : five sand : ten graded stone aggregate 40mm (forty millimetre) nominal size) finished with floating coat of neat cement and 100mm (one hundred millimetre) cast insitu plain concrete wall in 1:2:4 (one cement : two sand : four graded stone aggregate 20mm (twenty millimetre nominal size) including form work complete in all respect including carriage of materials within all leads and lifts.

wirh 100 mm thick walls of bricks masonry in Cement mortar 1:5 ( 1 cement : 5sand )

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-ChargePN - 16 Pipe, 25mm OD (SDR-7.4)

Providing and fixing PVC water storage tank ISI : 12701 marked , G.I inlet and outlet connection , 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting uo to all heights above ground level Complete. ncluding carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive , cost of cutting and making good the wall and floors etc. complete including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge 110mm x 90 mm

110mm x 75mm

Providing and fixing high pressure PVC spigot and socket , waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge 110mm dia

75 mm dia

Providing and fixing PVC single equal branch with oval access door , ISI marked insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive complete 110 mm dia including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

110mm dia

Providing and fixing PVC door band with oval access door , insertion rubber washer 3mm thick bolts and nutsISI marked complete including fixing with approved adhesive complete 110 mm dia including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

110 mm dia

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive complete 110 mm dia including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and fixing PVC collars ISI marked including fixing with approved adhesive complete 110 mm dia including carriage of materials within all leads an lifts as per direction of Engieer in charge

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive complete 110 mm dia including carriage of materials within all leads an lifts as per direction of Engieer in charge

Providing and fixing PVC offset 45 degree ISI marked including fixing with approved adhesive complete 110 mm dia including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and fixing PVC cowl 110 mm nominal diametre including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and fixing Vitrous china wash down water closet squatting pan Indian Type W.C. Pan) including jointing the trap with soil pipe in cement mortar 1;1 (1 cement 1 Sand)Orissa pattern in white shade.including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers.including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and fixing PTMT coloured /white high density polyethylene/ poly propylene 10.00 liters capacity (full flush) European standard control low level flushing cistern.with a pair of C.I. BRACKETS ,With fittings such as lead valve syphon, 15mm nomilal size PVC ball valve with polythene flot ,with push botten, coupling for connection with complete with inlet, outlet and overflow pipes ,40 mm dia C.P. flush bend etc. complete.No. 2603 of CERA/ HINDWARE including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and fixing vitreous china wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and macking good the same but excluding fittings FLAT BACK category No 1025 No 1025 size 550x400 mm including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and fixing vitreous china pedestal for wash basin complete recessed at the back for the reception of pipes and fittings.including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and fixing M.I. Union for wash basin or sink -32mm dia including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and fixing C.P. brass waste for wash basin or sink 32 mm dia iincluding carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing & fixing 32 mm dia, PVC waste pipe for wash basin or sink including check nut including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing & fixing 100 mm dia, C.P. grating including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and fixing 600mmx450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washer iincluding carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws600 X 20 mm including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and fixing 600x120mm (six hundred into one hundred twenty millimetre) glass self with CP brass brackets and guard rail complete fixed to wooden plugs with CP brass screws complete in all respect .

Providing and fixing choromium plated brass soap dish with CP brass brackets fixed to wooden cleats with CP brass screws complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing prayag double bowl kitchen sink or M.S brackets painted white i/c cutting holes in walls and making good the same but excluding fitting ISI marked No.6321.460x560x229including carriage of materials within all leads and lifts.

Providing and fixing C.P Brass bib tap with Capstan head .15 mm dia including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and fixing CP brass pillar tap with capstan head 15 mm dia including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and fixing c.p. brass angle valve 15mm without Nuts and pipe. including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing & fixing C.P. stop cock 15mm dia i/c all lead and lift and as per the direction of Engineer in charge

Providing & fixing PVC connection with brass union I ) 300mm/450 mm in length & 15mm nominal i/c all lead and lift and as per the direction of Engineer in charge

Providing and fixing brass full way valve with wheel 15mm nominal bore including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and fixing brass full way valve with wheel 25mm nominal bore including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge:

Constructing manhole with R.C.C. top slab in 1:2:4 mix ( One cement : two sand : four graded stone aggregate 20mm nominal size ) foundation concrete 1:4:8 ( one cement : four sand :eight graded stone aggregate 40mm nominal size ) inside plastering 15mm thick with cement mortar 1:3 ( one cement : three sand )finished with a floating coat of neat cement & making channels in concrete 1:2:4 mix ( One cement : two sand:four graded stone aggregate 20mm nominal size ) finished smooth complete including curing & testing inside size 800x800x500mm deep including Precast RCC cover with frame (heavy duty single seal pattern ) 455mm x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (Weight of cover 23Kg and weight of frame 15 Kg ) with 230mm thick wall of brick masonry using common burnt clay building bricks in cement mortar 1:3 ( one cement : three sand ) i/c all lead and lift and as per the direction of Engineer in charge

Earth work in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto all leads , dressing of sides and bottom and back filling in trenches with excavated suitable material in ordinary soil upto all depth. as directed by the Engineer-in-Charge.all useful material such as stone, shingle, aggregates& slate etc. shall be sorted out and stacked along the road side properly. Any loss to the public and private property to during the course of execution shall be the absoulte responsibility of the contractor which shall have to be duly compensated by him in all cases.

Providing and laying in position cement concrete of specified grade including the cost of form work in R/walls 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing weep holes in brick/ stone / plain reinforced concrete abutment, wing wall, return walls with 100 mm dia PVC pipe extending through the full width of the structure with slope of 1V : 20H towards drawing face complete as per drawing and technical specifications clauses 614, 709 and 1204.3.7 including carriage of material within all leads and lifts and other incidentals. including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Backfilling /Filter media with granular material behind retaining wall/breast wall as per specification 1204.3.8 in a width of 600 mm. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.