SPECIAL REPAIR TO APPROACH PATH OF CERTAIN SWTs AND REPLACEMENT OF IRON GATE NEAR BAGHMARA POST AT AF STN DIGARU.

Amount

JOB NO.: 51ASP/SR(B/R)/09/2021-22

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. not exceeding 10 sqm on plan and n exc 1.5 m in depth and getting out in soft loose soil complete all as specified and directed.

Surface excavation not exceeding 30cm deep and averaging 15cm and getting out soft /loose soil ccomplete all as specified and directed.

Forming embankments including raising (or lowering) earth, spreading in layers not exceeding 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., not exceeding 1.5 m high from base complete all as specified and directed.

Moorum/red bajri filling in floors or pavings, laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for PCC (1:4:8) type D2 using 40 mm graded stone aggregate in foundations,filling and mass concrete complete all as specified and directed.

Demolition of brick work in cement mortar incl all quions, arches, pillers etc. but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed.

M&L brick work with sub-class 'B' bricks straight or curved on plan exceeding 6 M mean radius built in CM 1:6 complete all as specified and directed.

M&L 15 mm rendering in CM 1:4 on on fair faces of brick work or concrete surafaces complete all as specified and directed.

M&L for preparation of newly plastered surface and applying two coat of Acrylic Smooth exterior paint of required shade (Camouflage) applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.

Removing excavated materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Spreading and levelling in layers not exceeding 25 cm thick and well ramming including watering completed all as specified and directed. Note: Earth obtained from excavation shall be used.

Demolition of roof floors (other than ground floors, beams, stare case, landing, chajjas, and similar suspended work complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

M/L for Hard core of gauge n.exc 63mm deposited spread levelled in layers not exceeding 15cm thick watered and rammed to a true surface using broken stones boulder complete all as specified and directed.

Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658-2006 of 100 mm thickness M-50 Grade all as specified and directed.

M&L for providing precast cement concrete kerb stone of 1:2:4 (20mm graded aggregate) type B1 set in cement mortar 1:4 including rounded or chamfered complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F framed work such as grills, grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for ornamental and intricate design conforming to Fe 290 Gde E-165 complete all as specified and directed.

M&L TMT bars 10 mm dia and over cut to length bend to shape required, including cranking, bending spirally for hoping for columns hooking ends and binding with MS steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed.

Ditto as per item No. 1.21 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on newly untreated surfaces of steel over 10cm in width or girth including preparation of surfaces complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat rough finished surface of concrete complete all as specified and directed.

M&L Formwork to sides of pillars,posts, struts, piers, columns and stanchions, square, rectangular or polygonal rough finished surface of concrete complete all as specified and directed.

M&L for RCC (Nominal Mix) 1:2:4 type B1 using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mas concrete complete all as specified and directed.

M&L for RCC (Nominal Mix) 1:2:4 type B1 using 20 mm graded stone aggregate as in Column, pillars, piers post and struts complete all as specified and directed.

M&L for 10 mm thick rendering in CM (1:4) on concrete surfaces complete all as specified and directed.

JOB NO.: 51ASP/SR(B&R)/03/2021-22

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft loose soil complete all as speicified and directed.

Surface excavation not exceeding 30cm deep and averaging 15cm and getting out soft /loose soil complete all as specified and directed.

Add to (or deduct) from item No 2.02 every 3 cm part thereof above or below 15 cm average depth complete all as specified and directed.

M&L for PCC (1:4:8) type D2 using 40 mm graded stone aggregate in foundations,filling and mass concrete complete all as speicified and directed.

Demolition Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L brick work with sub class 'B' bricks strait or curved on plan exc 6 M mean radius built in CM 1:6 complete all as specified and directed.

M&L Rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coat of cement base paint complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.

Spreading and levelling in layers not exceeding 25 cm thick and well ramming including watering complete all as specified and directed. Note: Earth obtained from excavation shall be used.

Removing excavated materials exc 1.50 KM but not exceeding 5 KM (outside MOD) from starting point and depositing where directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15cm thickness (Below or above ground level) un-reinforced complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as speicified and directed.

M/L for Hard core of gauge not exceeding 63mm deposited spread levelled in layers not exceeding 15cm thick watered and rammed to a true surface using broken stones boulder complete all as specified and directed.

M&L for 100mm thick cement concrete type D-2 1:4:8 (40 mm graded aggregate) as in sub baseof floor complete all as specified and directed.

M&L for 100mm thick cement concrete type B1 1:2:4 (20 mm graded aggregate) as in path/hardstanding complete all as speicified and directed.

Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 100 mm thickness M-50 Grade complete all as specified and directed.

M&L for providing precast cement concrete kerb stone of 1:2:4 (20mm graded aggregate) type B1 set in cement mortar 1:4 including rounded or chamfered complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks , hung as gates, including pintle hinges, stops, hand made sliding bolts and similar work conforming to Fe.290.Gde-E-165 complete all as spcified and directed.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as speicified and directed.

M&L for precast cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate set in CM (1:4) (as in cover slab of drain) complete all as speicfied and directed.

Dismantling fencing wire mesh any type complete all as specified and directed.

M&L for two coat of synthetic enamel pain over a coat of red oxide primer including preparing surfaces on new untreated surfaces of steel over 10 cm width or girth not other wise described complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-290 (Gde E-165) complete all as specified and directed.

M/S TRADE CENTRE

M/S B.H. ENTERPRISE

R.K.ENGINEERING ASSEMBLE

M/s Capital Traders

M/s Dhruv Enterprises

M/S. SUBHAS CONSTRUCTION CO.

M/s Ravi Enterprise