PERIODICAL SERVICES TO INTERNAL EXTERNAL SURFACES OF CERTAIN BLDG AND REPAIRS TO PLASTER ROOF LEAKAGES SEEPAGE VEGETATION ALUMINIUM SHEETING STAIRCASE GRILL MISC SHAFT REPAIRS AND DAY TO DAY MAINT WORK AT RASHI COMPLEX UNDER AGE BRII OF GE NW NAVY

Amount

Taking down cement plaster of any description including racking out joints hacking for key, scrubbing down with water in patches n.exc. 4 Sqm each all complete as directed. Note: Work shall be carried out upto G+14 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

M & L for Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and directed.

All as per item No 2.00 above but 5 mm thick in CM (1:3) on ceiling all complete as directed.

M&L rendering 20mm thick in CM 1:4 in two coats (15mm thick backing coat and 5mm thick setting coat ) mixed with water proofing compound on fair faces of brick work or concrete surfaces , finished with sand faced plaster complete all as specified ( WPC shall be measured and paid separately ). Note: Work shall be carried out upto G+14 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

M & L two coats of acrylic emulsion ext grade (100%Acrylic) over one coat of acrylic primer including Preparation of new plastered surfaces of walls etc all as specified. Note: Work shall be carried out upto G+14 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

Supply only integral water proofing compound of approved ISI make.

M & L for Preparing plastered or unplastered new wall surfaces and applying two coats of distemper oil emulsion white or tinted over a coat of alkali resistant priming paint all as specified.

M&L for Preparation of plastered or unplastered new surfaces and applying three coats of white wash on walls all as specified.

All as per item No 8.00 above but on ceiling.

M&L applying two coats of colour wash over a coat of white wash to wall incl preparation of newly plastered surfaces all as specified.

M&L anodised aluminium sheeting 22 gauge thick fixed in repairs as in crumple section.

Dismantling of MS grill of any description.

S&F framed work as MS grills with ends of bars shouldered and or riveted or forged into spikes, framed guard bars barred iron doors, ladders framed balusters, walk ways, railings, framework of water tanks and similar work confirm to Fe 290 Gde-E-165

Dismantling floor, hearth, or wall tiling incl cement mortar bedding (but not backing) rubbish off the premises.

M&L non-skid coloured Ceramic tiles 6 to 7mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in epoxy mortar and pointed in white of coloured cement to match including 20 mm thick screed bed in CM 1:6 all as specified.

M&L coloured glazed ceramic tiles 300x200x7mm on vertical surfaces set & jointed in neat cement slurry and pointed in white cement mixed with pigment including Rendering 10mm thick in CM 1:4 as backing coat to tiles all as specified.

M&L vitreous china squatting pan Orissa pattern of size 580 x 440 mm white with back inlet and integral footrest and anti syphonage pipe including 'P' or 'S' trap and provn of lime concrete complete all as specified in repairs.

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand.

S & F 32 mm dia., Waste fittings, brass chromium plated for stainless steel sink, glazed ware wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.

S & F in repair 32mm dia waste coupling of PTMT (half or full threaded) minimum weight 60gms.

S & F pillar tap 15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions.

S & F in repair pillar tap 15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions.

S&F PVC connection 15mm size with PTMT nuts of length 450mm in repairs.

S&F in repairs 32mm dia LDPE PVC waste pipe for WHB including socket & screw fixed complete to walls ,ceilings or in floors etc.

S&F in repair High density PVC pipe of pressure rating 6 kgf/Sq.cm of 40 mm bore fixed complete to walls ,ceilings or in floors etc.

S&F in repairs 10litre capacity PVC valveless, syphonic action type, flushing cristern, low level, white, with inlet, ball valve, float and handle including brackets all complete as specified and as directed.

S&F in repairs Flush pipe of polyethylene of low or high density for low level cistern 32mm dia.

S&F in repair CI Nahani trap dia of outlet 75mm including jointing to waste pipe in runlead.

M&L CI floor trap dia of outlet 75mm fixed in repairs including jointing to waste pipe in runlead fixed in cement concrete type B 1 (1:2:4).

S&F in repairs PTMT grating doom over Nahani trap and floor trap of 100mm Dia

Removing demolished materials outside MD land to a distance exc 5Km but n exc 10Km.

Taking down CI soil/waste/vent/rain water pipes including all fittings like shoes bends swan necks etc of any dia all as specified and directed. Note: Work shall be carried out upto G+14 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

Taking down PVC rain water pipes including all fittings like shoes bends swan necks etc of any dia all as specified and directed. Note: Work shall be carried out upto G+14 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

S & F CI soil/waste/vent pipe in any length with ears 100mm bore (sand cast) in any length with cement joints fixed to walls complete all as specified & directed. Note: Work shall be carried out upto G+14 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

All as per item No 34.00 above but except pipe.

S & F CI soil/waste/vent pipe in any length with ears 75mm bore (sand cast) in any length with cement joints fixed to walls complete all as specified & directed. Note: Work shall be carried out upto G+14 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

All as per item No 36.00 above but except pipe.

S & F CI bends with oval access door (any radius) for soil/waste pipes 100mm bore diminishing pieces or tapers on walls complete all as specified.

S & F CI bends with oval access door (any radius) for soil/waste pipes 75mm bore diminishing pieces or tapers on walls complete all as specified.

S & F CI branch pieces single (equal or unequal) ordinary or inverted (spigot or socketed type) with parallel branches with oval access door for 100mm bore pipe all as specified and directed.

S & F CI branch pieces single (equal or unequal) ordinary or inverted (spigot or socketed type) with parallel branches with oval access door for 75mm bore pipe all as specified and directed.

S & F CI rain water socket pipe 150mm bore with cement joints with ear fixed to wall all as specified and directed.

All as per item No 42.00 above but except pipes

S & F CI bends (any radius) for rainwater pipes 150mm bore diminishing pieces or tapers on walls complete all as specified.

S & F CI shoes 150mm bore

S & F PVC (SWR) pipes 150mm bore single socketed in any length with rubber ring joints fixed to walls.

All as per item No 46.00 above but except pipes

S & F PVC (SWR) bends 150mm bore any radius

S & F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls.

All as per item No 49.00 above but except pipes

S & F PVC (SWR) bends 110mm bore any radius with cement joints.

S & F CI Tee 100mm bore with cement joints complete all as specified.

S & F CI Tee 75mm bore with cement joints complete all as specified.

S & F 100mm cast iron sanitary connection socket to fit WC out-let.

M & L jointing only 100mm bore cast iron pipes and fittings, in repairs, with cement joints.

M & L jointing only 75mm bore cast iron pipes and fittings, in repairs, with cement joints.

Demolition of lime/cement concrete of any description and in any position not otherwise specifically provided for including china mosaic, WC etc.

Roughening surfaces of old concrete floor/ wall by picking, sweeping clean & washing down with water to remove dust etc, treating cement concrete or concrete surfaces with three dressing of sodium silicate & brushing with neat cement slurry with 3.00 kg of cement per sqm and applying cement plaster 10 mm thick in CM 1:3 with WPC & applying evenly a tack coat of bitumen 85/25 at 1.2 kg/Sqm. (Note: WPC shall be measured and paid separately.)

Plain cement concrete 1:7:12 type F2 (using 40mm graded stone aggregate) in sunken floor,surface finished fair and even complete all as specified and as directed.

M&L for taking out/removing vegetation growth or shrubs and injecting chemical GLYPHOSPHATE 41% SL 20 ML or till refusal by making cut/injection in the stem of plants 30 mm c/c and spraying with solution (25 ml GLYPHOSPHATE 41% diluted with one lit of water) and removing the plants/vegetation growth completly dead, including necessary scaffolding, julas etc complete as per manufacturer of chemical Biostadtlndia Ltd or equivalent approved by GE. Note: Work shall be carried out upto G+14 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

M&L for applying the rust remover alkaline in nature having specific gravity of 1.1 kg/ltr to the existing/additional rebars including wire brushing manually or by mechanical tools, after cleaning the disturbed surface etc. complete by draining water. Note :- (i) Measurement on the basis of area of concrete exposed. (ii) Work shall be carried out upto G+14 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

M&L for applying two coats of anti-rust protective coating in the form of Acrylic Polymer with a minimum solid content to 40% solids mixed with cement in 1:1.5 proportion (1 part polymer and 1.5 parts cement) on rebars after cleaning of rust scales as per manufacturer's instruction. Note :- (i) Measurement on the basis of area of concrete exposed. (ii) Work shall be carried out upto G+14 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

M&L for TMT bars 10mm dia. and over, Cut to length, bend to shape required including cranking, spirally and binding with MS wire (annealed) not less than 0.9mm dia.by placing in position new reinforcement bars including tack welding to existing reinforcement bars complete as specified and as directed. Note: Work shall be carried out upto G+14 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

Providing bonding coat of SBR polymer over the exposed steel/welded mesh/concrete in ratio 1:1 to 1:1.5 of polymer and cement complete as directed by the consultant. Note: Work shall be carried out upto G+14 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

M&L for repairing the damaged concrete portion by SBR Polymer with a minimum solid content to 40% cement mortar in proportion 1:5:15 i.e. (1 part SBR polymer : 5 parts OPC cement and and 15 parts of graded quartz aggregate (sand) upto 25mm thickness as directed by the manufacturer's instruction including necessary curing etc. complete all as specified & as directed. Note: Work shall be carried out upto G+14 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

M&L for casting and repairing of excessively damaged members with micro concrete at all levels with all leads and lift as directed including mixing, laying, levelling, finishing including curing complete. Grade of Micro-concrete to be M-40 at 28 days Note: Work shall be carried out upto G+14 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

M&L for providing steel form work of single length to pour the concrete/micro-concrete using waterproofing film coated ply wood complete all as specified and as directed. Note: Work shall be carried out upto G+14 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

Preparation of old painted steel surfaces of eaves gutters, CI pipes of any description girth n exc 60 cm & applying two coats of of Black Japan paint. Note: Work shall be carried out upto G+14 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

M & L for preparation of walls & applying two coats of chemical waterproofing treatment(601 raincoat of Pidilite or Dr.fixit or equivalent) of approved colour on wall such as Flexcoat, Beckcoat Exshield etc or equivalent over a coat of primeseal/primers including necessary scaffolding, Safety net etc all complete as directed by Engr-in-Charge. (Note :- work to be carried out upto G+14th floor)

Cleaning & drying surface of floor /dado of bathroom, WC & kitchen etc by mechanical means i.e. blower etc as directed.

Opening joints of floor tiles, junction of floor & dado tiles, 300mm height from bottom layer of dado tiles with electrical grinder, electrical blower etc complete in WC, bathroom & kitchen all as directed.

M & L for inserting chemical mixture of polymer 960 & o.p.c. through these opened joints manually by trowel to seal all cracks honey combing of slab/beams and walls etc complete upto 300mm height from bottom layer of dado in WC, bathroom & kitchen.

All as per item No 72.00 above but in WC

M & L for inserting chemical mixture of Polymer 960: GP Resin: Super seal M-104, Aquapox in appropriate ratio of 1:1:1:1 by weight in paste form through these opened joints of floor tiles and dado upto 300mm heigh from floor in bathroom and kitchen including NT etc complete.

All as per item No 74 above but in WC.

M&L for preparation of old surfaces on walls (plastered or unplastered or previously white washed) and applying one coat of white wash complete all as specified.

All as per item No 76.00 above but on ceiling.

M&L for preparation of old distempering surfaces including stopping of nail holes,cracks etc. and applying one coat of oil bound distemper complete all as specified.

Complete removal of existing treatment from wall surfaces by scrapping, washing & applying two coats of Oil bound distemper of approved make on wall over a coat of wall priming paint over a coat of Birla white putty on plastered surface and filling the surface imperfections such as holes, dirt, fine cracks all complete including preparation of surfaces all as specified and as directed.

M&L preparation of old decorated surfaces of wall including washing and applying two coats of Acrylic emulsion paint exterior grade (100% Acrylic) including necessary scaffolding, Safety net etc all complete as directed by Engr-in-Charge. (Note :- work to be carried out upto G+14th floor)

All as per item 80.00 above but on ceiling.

M&L for Preparation of old painted surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by EIC.

M&L preparation of old painted steel surfaces of over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M&L for writing letter or figures size as per existing numbering of the building (Block, Roman, Italic or Indian) all as specified and directed by Engr in Charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for.

M&L for reinforced cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in slabs supported on walls, beams deck slabs and in shelves etc complete all as specified and directed.

Mild steel TMT bars 6 to 8mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.

M&L for steel formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work nexc 20mm thick

M&L granite (of any type) slab 18 to 20mm thick machine cut,bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete for kitchen plateform /Gate Pillars over 20mm thick screed bed or bedding in cement mortar 1:4 etc complete all as directed .

M&L machine cut cudappah stone 20-25 mm thick over base,laid and jonted with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

S&F aluminium serrated finish 20mm dia curtain rod of approved pattern and shade with all fittings as per site requirement complete all as specified and directed by Engr-in-charge.

M&L for powder coated aluminium end block, rounded block & brackets fixed in repairs for curtain rod complete all as specifed and directed.

S & F in repairs Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to doors,windows shutter (wooden/aluminium), with wooden beading (any size)or aluminium wire staples and removing old beading, complete all as specified and directed.

Dismantling stone slabs and tiles of any description and thickness in floor, aprons etc laid bedded and pointed in any mortar all as specified.

M&L for machine cut kota stone slab flooring 18-20 mm thick above the tread of stpes in full width of step in one piece over cement screed base 15mm thick in CM 1:3 as required thickness including rounding of exposed edges ,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including ,cutting ,rubbing and polishing complete all as specified and directed

All as per item No 104.00 above but in vertical surface skirting ,riser of step,dado and pillars etc including taking down cement plaster on walls and racking out joints,hacking for key, scrubbing down with water etc and 10 mm thick rendering on brick or concrete suface in CM 1:3 complete all as specified and directed

S&F in repairs vitreous china wash down water closet semi pedestal pattern (Anglo-Indian type) white (excluding fixing bolts, flushing cistern and flush pipe) with 'P' or 'S' trap complete all as specified.

S&F new or in repair Plastic water closet seat cover, white/black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinges devices complete all as specified and directed.

S&F in repair 15 mm bore angle valves chromium plated screwed down high pressure with cruth or butterfly handle for 15mm dia iron pipe complete all as directed.

S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratry with plugs, washers and wastes; including beading in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmX460mm bowl size 410mm X 330mmX160mm complete as directed.

Taking down & S&F GI Tubing medium grade 15mm bore with all fittings, laid in trenches, wall or roof complete all specified and directed.

S&F in repairs Bib taps, 15mm dia cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule .

Taking down shutters of any description n exc 1 sqm each.

All as per Item No 1 above but exc 1 sqm and n exc 2 sqm each.

S&F factory made shutter 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc edges of framing, plain chamfered or rounded fitted with cut and mitred beads fo securing gauge etc sizes of members of shutters as specified in SSR part I section 8 complete all as specified and directed

S & F Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to doors,windows shutter (wooden/aluminium), with wooden beading (any size)or aluminium wire staples and removing old beading, complete all as specified and directed.

S&F 35mm thick second class hard wood factory made plain framed panelled shutters (two panes) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board medium density with commercial veneering both face. The size of rail shall be as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated all as specified and directed.

S&F 40mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides all as specified and directed.

S & F 25mm thick block board, grade-1 quality exterior grade commercial type fixed with screws to timber frame work of width n.exc. 25 cm in shelves or built-in cupbords, almirahs and similar work with lipping patti all complet as directed by EIC.

M&L for two coat synthetic enamel paint over a coat of pink primer on new wooden surface of any description over 10 cm width or girth not otherwise described including prepratio of surface complete all as specified and directed

S&F 150 mm extruded aluminium handles, fabricated type anodised fixed .

S&F 150mm aluminium anodised barrel tower bolts of extruded section fixed.

S&F 300 mm long aluminium alloy , anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy.

S&F 140 mm overall length floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor all complete as specified and as directed by Engr-in-Charge.

S&F hasp and staple safety type,mild steel, wire type, stove enamelled black including bolt to hinge plate and fixed with screws 125mm size complete all as specified and directed.

S&F in repair 100mm size stainless steel medium weight butt hinges all as specified and directed.

Taking down chowkats with shutter (without taking shutter from the frame) not exc 1.5 sqm each .

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 2omm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with sovent cement, suppling & fixing in the frame at site as per specification & direction.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & direction.

S&F 100 mm extruded aluminium handles, fabricated type anodised fixed.

S&F 100mm aluminium anodised barrel tower bolts of extruded section fixed.

S&F 75mm stailess steel medium weight butt hinges all as specified and directed.

Balaji Construction

satguruenterprises

Unitech Enterprises

MADHU ENTERPRIZES

ASHOK CONSTRUCTION

BOB ENTERPRISES

SAHU AND SAHU CO.