REPAIR TO WOODEN FURNITURE AT FURNITURE YARD BMC UNDER GE (CENTRAL) KOLKATA

Amount

Note:- Removal of following existing unserviceable wooden components of various MES furniture items or similar items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing nailing, wedging, glueing, providing hinges, applying putty to level the surface, placing every part in-tact and polishing the disturbed portion & Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with sand emery paper, the Wooden furniture shall be French polished with high gloss finish in light Walnut shade ,after properly cleaned and smoothened the surface. Top shall be 18 mm thick exterior grade pre-laminated particle board one side laminated in light Wallnut shade or as approved by GE, duly fixed with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH). Make of particle board : Century/Archid /Green/Actiontesa. All kind of work will be executed where the furniture exist in different User Units of GE(Central) including BSO's Furniture Yard at BMC, and office hours only as directed by Engineer-in-Charge (Note applicable for item Srl No-1.01 to 23.09).

Bed hard:FD-246: Top shall be 12 mm thick BWR grade plywood. Make-Archidply/Century Ply/ Greenply.

Head Rest as per drg.

Foot Rest as per drg.

Long Rail as per drg.

Stiffener as per drg.

M&L for French polish with high gloss finish in light Walnut shade after properly cleaned and smoothened the surface by scratching the entire wooden pallets ,filling putty to the bore holes where ever required.

Chair dining FD-279:- Back rest.

Front legs.

Rear legs.

Rails.

Leg stiffner.

Nylon Buffers 20mm

As per item No - 1.06 but for chair dining.

Removing the existing unserviceable cane plastic from the chair and Recanning the chairs by true Godrej pattern with plastic cane 2mm to 2.5mm wide, white colour, quality as approved by GE all as specified and as shown on drgs.

Chair dining MAP with cushion FD/E-6/MAP/10 (R) :- Back rest.

Front legs.

Rear legs.

Rails.

Vertical stiffner.

Stiffner.

50 x 50 x 20 mm and 3mm thick SS right angle bracket between leg and rails fixed with steel screws 8 nos in one chair.

Seat made of 12mmm thick BWR grade plywood over which 40 density foam 75mm thick shall be provided duly fixed with good quality tapestry cloth as approved by GE.

Nylon Buffers 20mm

As per item No - 1.06 but for chair dining MAP with Cushion.

chair dining long back w/cushion FD-357:- Back rest as per drg.

Front Legs.

Rear Legs.

Front/Side /rear rails.

Leg stiffeners.

Seat ply 12mm commercial cut in shape of size with perforated.

Seat 32 density cushion covered with best quality tapestry cloth/ leatherite rexine.

Back ply 10mm commercial cut in shape of size with perforated.

Seat 32 density cushion covered with best quality tapestry cloth/ leatherite rexine.

Nylon Buffers 20mm

As per item No - 1.06 but for chair dining long back w/cushion.

Chair Easy FD-229:- Rear Legs/Front Legs.

Rear/Front rails incl cane hole of legs.

Side rails for seat incl cane hole.

Front/rear stiffeners.

Upper/lower rails for back rest incl holes.

Arm rest.

Nylon Buffers 20mm

As per item No - 1.06 but for chair easy.

Removing the existing unserviceable cane plastic from the chair and Recanning the chairs by true Godrej pattern with plastic cane 2mm to 2.5mm wide, white colour, quality as approved by GE all as specified and as shown on drgs.

Chair wooden bottom w/o arms:- Back rest.

Front legs.

Rear legs.

Rails.

Leg stiffner.

Seat 6mm thick BWR grade ply cut in shape of size with perforated

Nylon Buffers 20mm

As per item No - 1.06 but for chair Wooden Bottom w/o arms.

Chair writing FD-280:- Back rest.

Front legs.

Rear legs.

Rails.

Leg stiffner.

Nylon Buffers 20mm

As per item No - 1.06 but for chair writing.

Removing the existing unserviceable cane plastic from the chair and Recanning the chairs by true Godrej pattern with plastic cane 2mm to 2.5mm wide, white colour, quality as approved by GE all as specified and as shown on drgs.

Peg Table FD-384:- Top.

Long Rails.

Short Rails.

Stiffener.

Nylon Buffers 20mm

As per item No - 1.06 but for peg table.

Sofa set 5 seater (3+1+1 with cushion) FD-281:- Leg as per drg.

Arm as per drg.

Wooden batten as per drg.

Bearer as per drg.

Taking out old pressed /torn old cushions from Nos set and Supply 40 density thick foam cushion of size 21”x 22” x 4” duly fixed with the GM fabric as approved by GE. Cushion cover with marking cloth shall be provided with good quality zip stitched on one edge of cushion cover with standard fitting.(Make of Cushion-kurlon Gold line).

As per item No - 1.06 but for sofa set 5 seater

Taking out old torn faded cushion cover from old cushions and S&F new cushion cover with marking cloth to the existing cushion. The cover of the cushion shall be GM fabric as approved by GE. Cushion cover shall be provided with good quality zip stitched on one edge of cushion cover with standard fitting.

Sofa set 4 seater FD-281:- Leg as per drg.

Arm as per drg.

Wooden batten as per drg.

Bearer as per drg.

Taking out old pressed /torn old cushions from Nos set and Supply 32 density thick foam cushion of size 21”x22”x4” duly covered with the GM fabric as approved by GE.Cushion cover shall be provided with best quality zip stitched on one edge of cushion cover with standard fitting.(Make of Cushion-kurlon Gold line).

As per item No - 1.06 but for sofa set 4 seater.

Taking out old torn faded cushion cover from old cushions and S&F new cushion cover with marking cloth to the existing cushion. The cover of the cushion shall be GM fabric as approved by GE. Cushion cover shall be provided with good quality zip stitched on one edge of cushion cover with standard fitting.

Table centre FD-274:- Top.

Legs as per drg.

Long Rails as per drg.

Short Rails as per drg.

Stiffener as per drg.

Nylon Buffers 20mm

As per item No - 1.06 but for table centre.

Table bed side FD-276:- Top.

Side of table Bed side.

Shelf/bottom base of table bed side.

Back ply 6mm commercial.

As per item No - 1.06 but for table bed side

Table dining 3' x 3' FD-291:- Top.

Legs as per drg.

Side rails as per drg.

L-shape corner of flat iron 25mm wide 5mm thick 4" x 4" between legs and rail to be fixed with screw.

Nylon Buffers 20mm

As per item No - 1.06 but for table dining 3' x 3'.

Table dining 4' x 3' FD - 273:- Top.

Legs as per drg.

Long rails as per drg.

Short rails as per drg.

L-shape corner of flat iron 5mm thick 4" x 4" between legs and rail to be fixed with screw.

Nylon Buffers 20mm

As per item No - 1.06 but for table dining 4' x 3'.

Table dining 6 person FD-273:- Top.

Legs as per drg.

Long rails as per drg.

Short rails as per drg.

L-shape corner of flat iron 5mm thick 4" x 4" between legs and rail to be fixed with screw.

Nylon Buffers 20mm

As per item No - 1.06 but for table dininig 6 person.

Table dining 8 person FD-273:- Top.

Legs as per drg.

Long rails as per drg.

Short rails as per drg.

L-shape corner of flat iron 5mm thick 4" x 4" between legs and rail to be fixed with screw.

Nylon Buffers 20mm

As per item No - 1.06 but for table dining 8 person.

Table 900x600 mm without drawer FD-284:- Top.

Legs as per drg.

Long Rails as per drg.

Short Rails as per drg.

Leg Stiffener as per drg.

Nylon Buffers 20mm

As per item No - 1.06 but for table 900 x 600 mm without drawer.

Table 900x600 mm with drawer FD-284:- Top.

Legs as per drg.

Long Rails as per drg.

Short Rails as per drg.

Leg Stiffener as per drg.

Drawer as per drg.

Nylon Buffers 20mm

As per item No - 1.06 but for table 900 x 600 mm with drawer.

Table dressing ladies FD-251:- Back as per drg.

Top as per drg.

Bottom as per drg.

Drawers as per drg.

Legs as per drg.

Nylon Buffers 20mm

Looking mirror of size 366 x 1220 mm and 5 mm thick .Make-Saint gobain ,Modi Float, Triveni Float Glass.

As per item No - 1.06 but for table dressing ladies.

Table dressing gents with mirror FD-230:- Back as per drg.

Top as per drg.

Bottom as per drg.

Drawers as per drg.

Looking mirror of size 366 x 1220 mm and 5 mm thick .Make-Saint gobain ,Modi Float, Triveni Float Glass

As per item No - 1.06 but for table dressing gents with mirror.

Table writing FD-275:- Top as per drg.

Legs as per drg .

Long rails as per drg.

Long stiffener as per drg.

Short rails as per drg.

Drawers as per drg.

Shutter as per drg.

Adjacent sides of the box as per drg.

Nylon Buffers 20mm

As per item No - 1.06 but for table writing.

Teapoy wooden FD-278:- Top as per drg.

Legs as per drg.

Long Rails as per drg.

Short rails as per drg.

Stiffner as per drg

Nylon Buffers 20mm

As per item No - 1.06 but for teapoy wooden.

Book Case FD - 237:- Top as per drg.

Bottom as per drg.

Sides as per drg.

Back shall be 6mm thick BWR Gde Plywood as per drg.

Shutters shall be fixed with SS Piano hinges and SS Knob/ handles as per drg

Shelves as per drg

Legs as per drg

Nylon Buffers 20mm

As per item No - 1.06 but for Book Case.

VISHWAS ENTERPRISES

CONSTRUCTION AND MAINTENANCE ENGINEERING CORPORATION

PUNAM ENTERPRISE

M/S SHRI P K ACHARJEE

RADHA ENTERPRISE

BENGAL TRADERS

AUTO ELECTRICALS

SPECIAL CONCRETE AND CONSTRUCTION CO.

MAZUMDER & CO

RELIABLE TRADERS AND ENGINEERS

ARISTO STEEL FURNITURE WORKS

Tirupati Buildcon Pvt. Ltd.