RENOVATION AND IMPROVEMENT TO P 51 AND P 52 BLOCK AT 2 AFSB MYSORE

Amount

Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete in CM 1:4 complete all as specified and directed.

Making good under cills or over arches, lintels and bressummers, including all pinning when necessary in CM 1:4 complete all as specified and directed.

Making good under cills or over arches, lintels and bressummers, including all pinning when necessary in CM 1:4(cement plastering work after removal of existing window portion etc )complete all as specified and directed.

M&L for Granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, urinal partitions and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl rounding edges,gas pipe inserting hole complete all as specified and directed.

Cutting chases in brick wall, pinning in. making good to facing where required and pointing in cement mortar 1:3 to ends or edges of cills etc,. And cutting chases for concealed water tubing etc., and making good , cutting not exc 10 cm in girth & Taking up or down steel tubing 15 mm and connections, including removal to store and S&F tube(RO Connection)s "medium grade", galvanised with all fixed complete to walls and ceilings or laid in floors, all as specified & directed.

Taking down Chowkhats or frames without taking off shutters from the frames n exc 1.5 Sqm each complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain coloured PVC sheet reinforced with M.S Square tubes, supporting & fixing in opening as per specification all as specified and as diercted.

S&F factory made solid PVC Moulded door shutter ,30 mm thick (style)consisting of frame made out of MS tubes for top & Bottom rail , MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail lock rail and bottom rail on either side and as gap insert for top rail and bottom rail : panelling of both side prelam PVC sheet to be fitted in the ms frame welded/sealed to the stiles & rails with suitable PVC seat beading ,and jointed together with solvent cement ,supplying and fixing in the frame at site, all as specified and directed.

Taking down Shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each, all as specified and directed.

Taking down steel window and ventilator (Without taking off shutter from the frame) of area not exceeding 1.50 Sqm each, all as specified and directed.

S&F 2nd class soft wood 30 mm in thickness wire gauzed & skeleton shutters, open rebated & prepared to receive wire gauze, etc. edge of framing plain, chamfered or rounded, fitted with cut & mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); to chowkats, all as specified and directed.

M&L Aluminium anodised powder coated windows with 3 channels including stainless steel mosquito proofing wire netting and 4mm thick glass with necessary accessories like jointing cleats, rubber packing, beading and screws etc complete,including powder coated aluminium grill of DG-103 as per TD drg No. AFB/TD/352/11 sht 1/2 & 2/2, complete all as specified and directed. Note - (i) Thickness of power coating shall not be less than 50 micron. (ii) Wire netting shall be of stainless steel wire 1.4mm dia with mesh size 12mm fixed with tinned tacks of stainless steel wire staples

M&L Aluminium anodised powder coated louver ventilators including 4mm thick tinted glass with openable hinges and necessary accessories like jointing cleats, rubber packing, beading and screws etc complete, as per TD drg No. AFB/TD/352/11 sht 1/2 & 2/2 complete all as specified and directed. Note - (i) Thickness of power coating shall not be less than 50 micron.

S&F Butt hinges, medium weight cold rolled mild steel 100 mm in size, all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 150 mm in length, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy, all as specified and directed.

S&F Aluminium anodised, barrel tower bolts of extruded section, 100 mm in length, all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 150 mm long of extruded section, all as specified and directed.

S&F Aluminium handles, cast type 75 mm in size, all as specified and directed.

S&F Aluminium handles 100mm size, cast type, anodised, all as specified and directed.

S&F in repair Harrison rails, Anodised Aluminium Alloy plated with fixing brackets, stops, rollers etc, all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia with brackets, all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire & average width of aperture 1.40mm with tinned tacks, or galvanised wire staples, all as specified and directed.

S&F 150 mm long Floor door stopper of aluminium alloy body & tongue, anodised, with hard drawn steel spring, all as specified and directed.

S&F Non - skid Ceramic colouerd tiles 7 to 8 mm thick (square/ rectangular) of each tile exceeding 0.18 Sqm but not exeeding 0.38 Sqm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 20 mm thick screed bed or bedding layer of mortar 1:4 complete all as specified and directed.

S&F Glazed ceramic coloured tiles in verticle surfaces 350 x 250 x 7 / 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, laid over 10 mm thick backing coat in cement mortar 1:3, complete all as specified and directed.

S&F Non - skid Ceramic colouerd tiles 7 to 8 mm thick (square/ rectangular) of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 10 mm thick screed bed or bedding layer of mortar 1:4, complete all as specified and directed.

M & L 75 mm thick Cement concrete work as in plinth protection type C-1 , 1:3:6 (20mm graded aggregates) with finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 Type D2 (40 mm graded aggregate) as in sub base to floors or similar works complete all as specified and directed.

M&L for chequered cement concrete tiles/heavy duty tiles of size 30cm x 30cm x 25mm thick set, joined and pointed in neat cement slurry in floors with grey cement and no pigment, laid over 15 mm thick screed bed in CM 1:4, complete all as specified and directed.

Taking down cement or cement plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick cement plaster in cement mortar 1:4 on fair faces of brick or concrete surfaceof walls, surface finished fair and even without using extra cement, all as specified and directed.

M&L for preparing new surfaces of wall and applying two coat of distemper oil emulsion over one coat of alkali resistant priming paint over 3 mm thcik wall care putty, complete all as specified and directed.

M&L for complete removal of existing treatment of wall and applying two coat of distemper oil emulsion over 3 mm thcik wall care putty with smooth finishing complete all as specified and directed.

M&L for complete removal of existing treatment of ceiling and applying two coat of white wash over priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed.

M&L for two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer, complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth, and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth, and applying one coat of synthetic enamel paint, complete all as specified and directed.

S&Fin repairs stainless steel kitchen or laboratory sinks with drainage board, made of 1mm thick, fixed with with plugs, washers including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F in Waste coupling of PTMT (half or full threaded). (Minimum weight 40 mm-60 gms), 40mm in size suitable for wash hand basin/sink, complete all as specified and directed.

S&F in repair fancy type chromium plated stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 15 mm dia bore, complete all as specified and directed.

S&F in repair 15 mm dia bore pipe chromium plated Bib taps(water saving taps), cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, low level flushing cistern 10 Liters, white in colour with inlet, ball valve, float and handle including brackets and PVC connections 15mm size with PTMT nuts of length 600mm and 15 mm Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms), complete all as specified and directed.

PVC (SWR) floor trap, plain with grating including jointing with solvent cement dia metre of outlet 75 mm, complete all as specified and directed.

S&F of soap dish, vitreous China white of size 160x160x90mm, complete all as specified and directed

S&F in repairs Vitreous china squatting pan, size 580x440 mm white in colour complete including provision of cement concerte all as specified and directed.

S&F in Repairs Brass chromium plated shower rose 125 mm siz, with or without swivel joints, including fixing to steel pipe or union complete, complete all as specified and directed.

Supply and fix PVC Cabinet of size 600x450x125mm with mirror at top, all as specified & directed.

S&F in Repairs Vitreous china wash basin, white in colour, flat back of size 630 x 450 mm including brackets, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, complete all as specified and directed.

Dismantling of CI pipe jointed in cement mortar and taking out from trenches or in floor or wall, 100 mm dia, complete all as specified and directed.

S&F PVC (SWR) pipe single socketed in any length with rubber ring joints laid in floor or trenches 110 mm bore pipe, complete all as specified and directed.

S&F PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls 110 mm bore pipe, complete all as specified and directed.

S&F PVC (SWR) bends any radius 110 mm bore pipe, complete all as specified and directed.

S&F 110 mm PVC (SWR) vent cowl, complete all as specified and directed.

S&F for PVC (SWR) junction single, (Single T) equal or unequal 110 mm bore, complete all as specified and directed.

S&F for PVC (SWR) couplers 110 mm bore, complete all as specified and directed.

S&F in Repairs PVC Rotational moulded polyethylene water storage tanks 1000 Litre (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of water tanks and removing to store all as specified and directed .

Demolition of Concrete in ground floors and pavings not exceeding 15 cm thick above or below ground level complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

Removing building materials to a distance of not exceeding 5 KM lead including loading, unloading and stacking at the destination, complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, complete all as specified and directed.

M&L for Point wiring with 1.5 sqmm, single core ,PVC insulated, unsheathed FRLS cable, 1100 volts grade, IS -694 marked, with multi stranded copper conductor and earth continuity copper conductor cable of same size as in phase/neutral and connected to common earth dolly drawn through and including rigid PVC conduit of suitable size alongwith fittings and accessories, fixed /laid/concealed in walls/ceilings including cutting chases and making good to walls, floors etc, and also including suitable sunken type pressed steel terminal box and suitable laminated sheet top cover for One light/Ceiling fan/ EF/Wall Fan controlled by one, one way switch, complete all as specified and directed.

M&L for Point wiring with 1.5 sqmm, single core ,PVC insulated, unsheathed FRLS cable, 1100 volts grade, IS -694 marked, with multi stranded copper conductor and earth continuity copper conductor cable of same size as in phase/neutral and connected to common earth dolly drawn through and including rigid PVC conduit of suitable size alongwith fittings and accessories, fixed /laid/concealed in walls/ceilings including cutting chases and making good to walls, floors etc, and also including suitable sunken type pressed steel terminal box and suitable laminated sheet top cover for One bell point, complete all as specified and directed.

M&L for Point wiring with 1.5 sqmm, single core ,PVC insulated, unsheathed FRLS cable, 1100 volts grade, IS -694 marked, with multi stranded copper conductor and earth continuity copper conductor cable of same size as in phase/neutral and connected to common earth dolly drawn through and including rigid PVC conduit of suitable size alongwith fittings and accessories, fixed /laid/concealed in walls/ceilings including cutting chases and making good to walls, floors etc, and also including suitable sunken type pressed steel terminal box and suitable laminated sheet top cover for One three pin socket outlet 5 Amp controlled by one, one way switch on independent board, complete all as specified and directed.

M&L for Point wiring with 2.5 sqmm, single core ,PVC insulated, unsheathed FRLS cable, 1100 volts grade, IS -694 marked, with multi stranded copper conductor and earth continuity copper conductor cable of same size as in phase/neutral and connected to common earth dolly drawn through and including rigid PVC conduit of suitable size alongwith fittings and accessories, fixed /laid/concealed in walls/ceilings including cutting chases and making good to walls, floors etc, and also including suitable sunken type pressed steel terminal box and suitable laminated sheet top cover for on independent board for 15 Amp Socket, complete all as specified and directed.

M&L for Point wiring with 4 sqmm, single core ,PVC insulated, unsheathed FRLS cable, 1100 volts grade, IS -694 marked, with multi stranded copper conductor and earth continuity copper conductor cable of same size as in phase/neutral and connected to common earth dolly drawn through and including rigid PVC conduit of suitable size alongwith fittings and accessories, fixed /laid/concealed in walls/ceilings including cutting chases and making good to walls, floors etc, and also including suitable sunken type pressed steel terminal box and suitable laminated sheet top cover for independent board for 15 Amp Socket, complete all as specified and directed.

Supply and Fix Modular Bell push, complete all as specified and directed.

Supply and Fix Call bell, complete all as specified and directed.

Supply and fix Modular switch 1 way 6A, 1 module, complete all as specified and directed.

Supply and fix Modular switch 1 way 16A, 1 module, complete all as specified and directed.

Supply and fix Modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed.

Supply and fix Modular 0 Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified and directed.

S & F Modular Fan step regulator, 120W - 2 module, complete all as specified and directed.

Supply and Fix Modular white cover Plate with Frame 01 Module, complete all as specified and directed.

Supply and Fix Modular white cover Plate with Frame 02 Module, complete all as specified and directed.

Supply and Fix Modular white cover Plate with Frame 03 Module, complete all as specified and directed.

Supply and Fix Modular white cover Plate with Frame 06 Module, complete all as specified and directed.

Supply and Fix Modular Metal Flush box 01/ 02 Module, complete all as specified and directed.

Supply and Fix Modular Metal Flush box 3 Module, complete all as specified and directed.

Supply and Fix Modular Metal Flush box 6 Module, complete all as specified and directed.

Supply and fix ceiling rose 3 Phase / PVC/ Polycarbonate, isolated body, complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

Supply and fixing LED lights fitting 1x 10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

Supply and Fix Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

Supply and Fix Single pole and neutral enclosure witha two pin and earth plug and socket complete with one single pole 20 Amp MCB, complete all as specified and directed.

S&F in replacement SPN distribution boards protection class IP-43 single door suitable for mounting MCB with min 200 Amps rating bus bar SPN 8 way, complete all as specified and directed.

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of Four poles and current carrying capacity 63 Amp to 100Amps in the DB, complete all as specified and directed.

Supply and fixing 6 to 32 Amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB), complete all as specified and directed.

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) SPN and current carrying capacity 32 Amp in the DB, complete all as specified and directed.

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) SPN and current carrying capacity 40 Amps in the DB, complete all as specified and directed.

Removing of Ceiling Fan from site, Carrying to workshop, Cleaning, Greasing and Refixing at same location, complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and directed.

Supply & Fix LED Bulb 10 Watts, complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers, complete all as specified and directed.

M&L for cutting hole in wall for fixing exhaust fan 300mm sweep and making good the disturbed surfaces with plastering in cement mortar 1:3, complete all as specified and directed.

M&L for submain wiring alongwith earth wire with the following sizes of FR is PVC insulated copper conductor, single core cable in concealed PVC conduit as required 2 x 4 Sqmm+ 1 x 4 Sqmm earth wire, complete all as specified and directed. Note:- 3 runs of 4 Sqmm PVC insulated copper cable and one run of PVC rigid conduit shall be measured as one unit

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified including testing, complete all as specified and directed.

VARGHESECHACKO AND CO (BID ID -3120540)

SREE VINAYAKA ENTERPRISES (BID ID -3117002)