REPAIR AND MODIFICATION IN BSL3 FACILITY OF TBC AND DST LABORATORY, MICROBIOLOGY DEPARTMENT, GOVERNMENT MEDICAL COLLEGE, AURANGABAD

Amount

Part-A Clean RoomPartition Work

Supply and Installation of sandwiched false ceiling of minimum 50 mm thickness both side Epoxy Powder coated (60-80 microns) 0.8mm thick G.I sheets (hot dipped with zinc coating of 120 gsm) with PUF as infill of density not less than 40+/-2 Kg/m3.Necessary stiffeners to be provided as per manufacturer's standard and complete in all respects including supports, hangers, sealants, complete with all accessories as required etc. Ceilings shall include cut-outs for Diffusers, Light fittings.Note:1.All ceiling joints and gaps between panel to panel, ceiling elements (such as Diffusers, light fixtures etc.) to be sealed using silicon sealant.2.Colour of the ceiling panel: As approved by Engineer-in-Charge.3.Joint width between panels shall not exceed 3mm.4.Basically heightning of existing BSL3 facility including expanding the existing facility with required cutouts ,wiring,and others

Supply and installation of extruded aluminium with epoxy powder coated (60-80 micron), clip on type R- 50 covings for the entire wall to wall and wall to ceiling joints including all accessories required for fixing.Note:All joints between clean room panels and coving to be sealed using silicon sealant.

Supply and installation of 3D Internal/External corner coves of aluminium with epoxy powder coated (60-80 micron) suitable for R-50 covings including all accessories required for fixing.Note:All joints between clean room panels and coving to be sealed using silicon sealant.

Single leaf double door size: 1500 mm (W) x 2100 mm (H)(minimum 1400 mm clear opening)

Supply and installation of Homogeneous Vinyl Flooring 2mm thick with Anti-bacterial, Anti-fungal Properties, the flooring sheets should be highly durable with resistance to shock, indentation, scratchproof. Also, inert to body fluids, chemicals and disinfectants, should not be affected by temperature variation. Materials includes Floor Vinyl, wielding electrodes, adhesives & floor coving. With supply and installation of underlay and primerself-levelling course approximately 3mm thickness, complete with all accessories as required etc.

Part-B HVAC Work

Alterations required in the existing Supply/Fresh air AHU: Changing the electric motor and blower capacity as the volume of BSL3 increases, also introducing a 2 row cooling coil, connecting with additional conditioning unit

Supply, installation, testing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with MS flange, neoprene rubber gaskets, elbows, splitter dampers, vanes, GI threaded rod hangers, MS supports, sealant, bolt nuts, rivets, complete with all accessories as required etc. as per approved drawings and specifications of following sheet thickness completeas required Thickness 0.80 mm sheet

Supply, installation, testing and commissioning of GI opposed blade type volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges, complete with allaccessories as required etc., as per specifications.

Supplying and fixing of following thickness duly laminated aluminium foil of mat finish closed cell Nitrile rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self-adhesive nitrile rubber tape insulationcomplete with all accessories as required etc. 13mm

Supply Installation, Testing & Commissioning of AHU Kit consists of a control PCB, electronic expansion valve, complete with all accessories as required etc. This kit will connect the AHU to the Outdoor Unit (Additionally introduced).

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines,complete with all accessories as required etc. 12.7 mm dia (OD) (Soft drawn) with tube thickness1.2 mm with 19 mm thick insulation

Part-C Electrical Work

Additional UV Light for Bsl3 including wiring switch and sockets

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable Size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. asrequired.

Bio Safety cabinet Shifting

Trolley for BSC

Storage racks for store rooms and media preparation room

Seminar hall pop work

Chairs for Seminar Hall

BSL Hepafilter Replacement

Pass box Door interlock arrangement

Ahu Panel VFD replacement and other Mcb and contactor replacement

AC 2Tr capacity for BSL 2 and seminarhall with complete copper piping and other accessories

AC 1Tr capacity for Hybridisation room,media room & CBNATT room

As lot of rework is to be done hence labour work for dismantling ,Re fitting and additional contigencies @20%