CERTAIN ROUTINE B AND R MAINT AND REPAIR WORKS AT DIAT DU GIRINAGAR PUNE 25

Amount

S&F in repairs 25mm dia powder coated aluminium draping rods corrugated of approved quality including brackets with dome complete all as specified and directed.

S&F in repair Stainless steel fancy chromium plated 25mm dia as in curtain rods with domes bothside of rod & chromium plated brackets suitable for 25mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all specified and as directed.

Complete removal of entire existing water proofing treatment in any position including tarfelt, Plaster, lean concrete of any thickness, gravels etc. and removing the debries out side MD land complete all as specified and directed.

M&L for providing PCC (1:2:4) type B0 (using 12.5mm graded stone agg) as in padding over roof & chajja (at any respective height of bldg) with using integral water proofing compound as per mfr's instructions complete all as specified and directed. Note:- Water prooofing measured and paid seperately and taken as "Supply only".

M&L for 10 mm thick rendering in CM 1:4 over concrete surfaces mixed with water proofing compound @ 3% by weight of cement complete all as specified and directed. Note: Water Proofing compound shall be measured and paid for seprately as "Supply Only"

Supply only WPC complete all as specified and as directed.

M&L for, provding and carry out water proofing treatment to sound ,moisture free concrete surface system includes preparation to remove loose dust, dirt, loose mortor, curing compound etc carry out cementious injection grouting at leakage points and construction joints using cement slurry modified with Cebex 100 plasticised expandive ground admixture supplies in 225 gm pouch, treatment of construction joints using polymer modified mortor prepare by using Nitobond SBR latects ,application of polymer modified battaat floor, wall junction, filling of annular space around rain water outlet using conbextra GP2 non shrink cementious grouts. Andulated surface and npot hole shall be treated with epoxy mortor or putty to obtained sound/levelled surface. Application of primer Nito proof WB primer on sound mortor slab surface. Followed by application of coat of Nito proof 600 PF liquid applied single component pitch free polyurithane coating supplied in 25 kg drum coverage @ 2.30 Kg/m2 to achieve 1.5 mm thickness in two coats complete including all tools and tackles as per manufactures specification. Coating shall be having crackbriding of 2 mm, elonagtion (ASTMD 124) greater than 600 percentage, tensile strength ( ASTM D412), 95 percenatge, 85 percentage of solid contantents, tear resistance (ASTM D624), 15 KN/M,shore A hardness (ASTM D 2240), 60, water vapour transmission not more than 1 gm /M2, water permeability (DIN-1048) -NIL, services temperature-40'C to 70 degree 'C', flash point greater than 70 'C' HSE guidelines:- It is recommanded to provide adequate general and local exhust ventillations, providing protection to Eye, face, Hand andother skin by wearing appropriate glose, gogle, face cilid, respiratory protection etc, directed in SDS of the product .

M&L for preparation of Interior wall surface,or any waterfall area including removing all fungus,dirt,grease and patches and drying surfaces and filling cracks if any with crack filler and appling two coats antifungal damp proof coating with time difference of min 04 hrs make Asian /Dr Fixit Sure seal or equilient making surface ready to receive final surface finish area of applying two coats 1.50 Sqm per Kg material in horrizontal and vertical aplication and as per manufacturers instructions/specifiaction and directed by EIC.

M&L grouting the joints of flooring any type and any size of tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade 0.10 kg of hardener and 0.20 kg of resin per kg, including filling grouting and finishing complete all as specified and directed.

Dismantling floor or wall tiling incl cement mortar bedding (but not backing) removing serveaceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B-0( wing 12.5 mm graded stone aggre) as in sub base of floor complete all as specified and directed.

M&L for Non Skid Ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for coloured non skid ceramic tiles of size 300mm x 300mm x 7mm thick of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 15 mm thick screed bed in cement mortar (1:6) as in floors complete all as specified and as directed.

M & L for coloured double charged vitrified tiles 8 to10mm thick (square/ rectangular) of colour and pattern as approved by GE, polished, area of each tile exc. 0.18 Sqm but not exc. 0.36 Sqm as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of dark shade tiles, laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M & L for coloured glazed ceramic tiles of size 450mm x 300mm x 7mm thick as in dado/ skirting of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as specified and directed.

Refixing 20mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) complete all as specified and directed.

Refixing 15mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) complete all as specified and directed.

Supply and fix for 15 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

S&F for 15/16 mm dia CPVC pipes SDR 11 including all Brass CPVC fittings for15 mm bore pipe on walls/ceiling or laying in floors and including 15/16 mm dia fittings for fixing of sanitary fittings complete all as specified and directed.

Supply and fix for 20 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F for 20mm dia CPVC pipes SDR 11 including all Brass CPVC fittings for 20mm bore pipe on walls/ceiling or laying in floors and including 20 to 15mm dia fittings for fixing of sanitary fittings complete. Including taking up or down steel tubing and connections or removal to store complete all as specified and directed.

M&L cutting chases pinning in brick work for concealed water tubing etc. and making good to facings where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth complete all as specified and directed.

Material and labour for PP-R gate valves (brass insert) of 20mm bore complete including taking down old unserviceable valve complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as specified and directed.

Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as specified and directed.

S & F for pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, as per ISI mark, including PCC (1:3:6), type C-0,( using 12.5 mm graded stone aggregates) as in filling of pressed steel frames complete all as specified and directed .

S & F for pressed steel frames of size 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, as per ISI mark, including PCC (1:3:6), type C-0, (using 12.5 mm graded stone aggregates) as in filling of pressed steel frames complete all as specified and directed .

Supply and fix for 30mm thick factory made flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters complete all as specified and directed

Supply and fix for 35mm thick factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze,etc.(without sash bars), edges of framing plain,chamfered or rounded, fitted with cut and mitred beads for securing glass,etc; the size of the rail and stile as specified in SSR Part-I, Section 8, clause 8.24 (a) complete all as specified and directed.

M&L for two coat of synthetic enamel paint over a coat of pink primer including preparation of new/old painted wood surfaces complete all as specified and directed.

S & F and repair for stainless steel wire cloth 0.63 mm nominal dia of wire, average width of aperture 1.40 mm, fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and as directed.

S & F for factory made solid Panel PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 4mm thick moulded PVC sheet on the front face and 4mm moulded prelam colour PVC sheet on back face wirth wood free EPS, fixed in frame at site as per specification and drawing including fittings complete all as specified and as directed.

Hacking out old unserviceable glass / broken glass panes of any description, from old wooden or metal frames, or stone, concrete or brick surrounds any thickness or size complete all as specified and directed.

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in suitable size for wooden frames in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

Ditto all as per item No 37 above but Figured glass, pinhead type in squares n exc 0.5 sqm each pane complete all as specified and as directed.

Ditto all as per item No 37 above but plain transperent Fibre glass sheet , pinhead type in squares n exc 0.5 sqm each pane complete all as specified and directed.

Taking down chowkats or frames of wooden or steel window not exc 1.5 sqm each with Shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F three track sliding aluminium window with 4mm thick tinted glass in two shutter and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing including good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge and including taking down old steel windows. Series of aluminium section as per Jindal is (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352 complete all as specified and as directed.

Supply and fix for aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed.

S& F in repairs 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repairs 150 mm long aluminium, anodised, or matt finished barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs 150 mm size extruded aluminium alloy bow handles, fabricated type with plate, matt or anodised finish complete all as specified and directed.

S & F in repairs for butt hinges, 100mm size, mild steel cold rolled, medium weight complete all as specified and as directed.

Supply and fix in repairs for 75mm size butt hinges, extruded brass with mild steel hinge pin, bright polished and fixed type D-11 complete all as specified and as directed.

Supply and fix in repairs for 300mm, mild steel, ordinary rat tail rod pattern spring (helical spring) including roller and roller plate complete all as specified and as directed.

Supply and fix in repairs for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed

Supply and fix in repairs for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, overall length of cover plate 150mm complete all as specified and directed.

Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement incl preparation on old walls to receive new plaster complete all as specified and directed.

M & L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement incl preparation on old walls to receive new plaster complete all as specified and directed.

M&L for 5mm thick rendering in CM 1:3 on concrete surfaces in ceiling complete all as specified and directed.

M&L for preparation of surfaces and applying 2mm thick wall care putty in two layers on walls/concrete over old /new plaster surfaces internally complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall & aplying two coats of oil bound distemper over a coat of approved primer on Old/New surfaces of wall complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling & applying two coats of oil bound distemper over a coat of approved primer on old surfaces of ceiling complete all as specified and directed.

M&L for preparation /repairs of plastered or unplastered old decorated surfaces of ceiling etc. incl pillasters and cornices etc. incl brooming down of steel wire brushing scrapping down smoke soot moulds moss and efflorescence salts and trading oil and grease spot, washing etct one coat of oil emulsion disteper complete all as specified and directed.

M&L for Preparation of old decorated surfaces of walls/roof projection/chajja including concrete (plastered or un plastered) by brooming down and scraping wherever necessary and apply one coats of external waterproof emulsion paint Apex Ultima or equivalent with primer including necessary scaffolding required for painting work & safety measures at any height of bldg complete all as specified and directed.

M&L for complete removal & applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/10sqm over and including priming coat of exterior primer applied @ 0.90litre/10Sqm over Old/new surfaces of wall with necessary scaffolding required for painting work, safety measures etc. complete all as specified and directed.

M&L for preparation of old painted surfaces of steel & Iron of any description over 10 cm width or girth and applying one coat of synthetic enamel paint (1st quality) including necessary scaffolding required for painting work & safety measures at any height of bldg complete all as specified and directed.

M&L for preparing old painted surfaces of wood and wood based surfaces of any description over 10 Cm width or girth & applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling of single layer mangalore tiles roofing including ridges complete all as specified and directed.

Dismantling the battens of any size incl tiling fillets spaced exc 15cm c/c complete all as specified and directed.

M&L for second class hard wood clean sawn battens at 30cm centers to center, sectional area exc 5 & n exc 15 Sqcm complete all as specified and directed.

All as per Item No.65 above but fixing only complete all as specified and directed.

Material and labour for 2nd class hard wood, clean sawn, in scantling timber work including dismantling work etc complete all as specified and directed.

All as per serial item No.67 here-in-before but except timber complete all as specified and directed.

M&L for preparation of surfaces of wood and wood based material new or old of any description and girth and treated with creosote oil etc complete all as specified and directed.

Material and labour for preparation of battens, any size and spacing , old/new and treated all over (measured overall on one side only, spaces not deducted) with two coats of creosote oil complete all as specified and directed.

M&L for roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and directed.

Laying only mangalore pattern tiles (obtained from taking down) complete all as specified and directed.

M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and directed.

Laying only ridge or hip type Mangalore pattern tiles (obtained from taking down) bedded and jointed in cement mortar 1:6 complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

M&L Fibre board Eves/ Weather Boarding 12 to 20mm thick or Feather Edged 15mm to 20mm thick and fixed with 30mm Lap, complete as approved arch pattern any size and shape including taking down existing boarding complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets/AC boards, any thickness, including cover fillets complete all as specified and directed.

M&L for providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid T-2430 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200 mm c/c) consisting of Main Runner 3600 mm long, Cross Tee 1200mm/600mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300 mm c/c. The Main Runners to be placed @ 1200mm, The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm x 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600mm x 600mm. Grid of module size 600mm x 600mm shall be supported by 6 mm dia G.I. wire from purlins/soffit. 4mm thick High Pressure Steam Cured Everest Non Asbestos Fibre Cement Designer Ceiling Board (Density>1200 Kg/m3, Modulus of Rupture(M.O.R)-15.85 MPa, Thermal Conductivity(K)-0.0872 W/mK) of size 595mm x 595mm, confirming IS 14862 & Type B Category III of ISO 8336:1993, (Reaction to fire-A2-s1-d0) tested as per EN13501 Part-I & BS-476 Part 4,5,6&7, should be placed in the Grid module to form a False Ceiling complete all as specified and directed.

S&F in repairs 12mm thick prelaminated particle board interior grade, conforming to IS-12823, Gde-I prelaminated both side with decorative choice lamination as in cupboard shutters, Kitchen cabinets etc fixed with screw including 3mm thick, ist class HW(TW) beading all around on edging to timber frame work complete all as specified and directed.

S&F in repair 18mm thick prelaminated particle board interior grade, conforming to IS-12823, Gde-I prelaminated both side with decorative choice lamination as in cupboard shutters, Kitchen cabinets etc fixed with screw including 3mm thick, ist class HW(TW) beading all around on edging to timber frame work complete all as specified and directed.

S&F continuous (Piano) hinges mild steel bright finished or electro galvanised width of flap 30mm complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for framed work complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings etc. with ends of bars shouldered or riveted or gorged into spikes framed guard bars barred to windows, iron door, ladders framed balusters, walk ways, railing, frame work for water tank and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confrming to IS 1161-1979 grade St-240 with necessry angle cleats and girder plate etc complete all as specified and as directed.

M&L for Two coats of synthetic enamel paint over a coat of red oxide on steel surfaces exc. 10 cm width or girth etc. complete all as specified & directed.

Dismantling plain or corrugated steel sheeting any gauge thickness including Nainital or similar pattern roof covering complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering / clading to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix in repair for polycarbonate fibre glass reinforced translucent corrugated/ Plain sheeting 2.00 mm thick hollow section fixed with coach screw and washer in roof, wall etc. complete all as specified and as directed.

Demolition of Brickwork or stone masonary built in cement mortar inlcuding all quions, arches, pillars etc. but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for Brickwork with flyash bricks straight or curved on plan exc. 6mtr mean radius built in CM 1:6 complete all as specified and as directed.

Demolition of cement concrete in ground floors and paving n. exe 15cm thick below or above GL all as directed & cleaning premises complete all as specified and directed.

M & L for 75 mm th PCC 1:3:6 (using 40 mm graded stne aggregate) type C-2 as in floors, paving, plinth protection, finished even and smooth wthout using extra cement complete all as specified and directed .

M&L for roughening surfaces of old concrete floor of sunken portion by picking sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry @ 3Kg/sqm complete all as specified and directed.

M&L for Rendering 10mm thick in CM 1:4 on concrete surfaces finished even and smooth using extra cement mixed with and approved water proofing compound @ 3% weight of cement and applying two coats of Roff Hyguard EX Rezone Chemicals or equivalent make complete all as specified and as directed.

M&L for PCC 1:5:10 type E-2 (using 40mm graded brick aggregate) lean concrete for filling sunken floor complete all as specified and directed.

S&F in repairs 60 cm long brass CP tubular towel rail 20-mm dia D type complete all as specified and directed.

S&F in repair for vitreous China wash basin, white, flat back, size 550x400mm including necessary brackets,cp couplings, pvc waste pipes etc. complete all as specified and directed.

S & F in repairs for vitreous china EWC of white colour with plastic water closet seat closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, including connection to drain or out going pipe and to PVC flusing pipe, antisyphonage pipe and all necessary fittings etc complete all as specified and as directed.

S&F in repairs stainless steel kitchen sink with drainage board of overall size 915x460mm and bowl size 410x330x160mm with plugs,washers and wastes; 32 mm dia Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. as in waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and directed.

S&F in repairs readymade 9 feet pulley operated cloth drying system, aluminium anodised 22mm outer dia pipe, channel assembly, locking system to hide rope knot, ropes 4mm dia HDPE double core & fitting material etc complete all as specified and directed.

S&F in repairs plastic water closet seat, white closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and directed.

S&F in repairs 10 liters capacity PVC low level flushing cistern with ISI marked body, fixed in repairs complete all as specified and directed.

S & Fin repairs for 15mm dia PVC connection 450mm long including PTMT check nuts etc complete all as specified and as directed

S&F in repairs Hand shower (health faucet) (ABS Chromium plated) suitable fo 15 mm dia pipe, 1.2mtr long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repairs Chromium Plated Toilet Paper Holder with flat recessed type dtsinless steel complete all as specified and directed.

S & F in repairs soap dish chromium plated of size 100 x 100 mm any type, chromium plated brass screws complete all as specified and directed.

S & F in repairs 32 mm kitchen sink/WHB waste couplings (SS)size required at site etc complete all as specified and directed.

S&F in repairs 15 mm dia PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F in repairs 20 mm dia PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F in repairs brass chromium plated shower rose of 125 mm size with swivel joint including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs Bib taps ( small/long body)fancy type chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as directed.

S & F in repairs 15 mm bore pillar tap CP fancy type of make Prayag or equivalent complete all as specified and drected.

S&F in repairs Brass CP mixer including connection pipes for mixing hot or cold water screwed down for UPVC/iron pipe and fixed complete complete all as specified and directed.

S&F in repairs stop valve, cast copper alloy, fancy type,chromium plated with long shank and cup (Concealed type), screwed down both ends for high pressure, as per ISI suitable for 15mm dia iron pipe complete all as specified and directed.

S & F in repairs spindel of brass of any size/ type and in any position complete all as specified and directed.

S&F in repair fancy type, chromium plated angular stop cock fixed with wall flange for 15mm bore of pipe complete all as specified and as directed.

S&F in repairs low density polyethylene(LDPE) pipes for working pressure rating 6 Kgf / Sqcm with polyethylene thread union and check nuts for waste pipe of WHB, 750 mm long, 32 mm dia complete all as specified and directed.

S&F in repairs 40 mm dia, 75 cm long PVC low density waste pipe for stainless steel sink / UR of working pressure rating @ 4 Kg / Sqcm with polyethylene union and check nuts complete all as specified and directed.

Welding in repairs n.exc.2.5 CM in length and thickness of metal/steel n.exc. 6mm complete all as specified and as directed.

Supply & fixing PVC bath cabinet, size 450 x 600mm, comprising of looking glass, space for bath soaps, shampoo, tooth brush and paste, handle towel rail, fixed as in repairs complete all as specified and directed.

S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf corner type three tyres with chromium plated brackets, bracket guard and railing 30cm size incl screws, fixed as in repair complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/walls including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along along the centre line over fittings and accessories) complete all as specified and directed.

All as per item no 126 as above but 110mm dia including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along along the centre line over fittings and accessories) complete all as specified and as directed.

M&L for PVC (SWR) bends of any radius with oval and access door of 75mm dia complete all as specified and as directed.

All as per Srl item No 128 above but 110 mm dia complete all as specified and as directed.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified & directed.

S&F PVC (SWR) vent cowl 75mm bore complete all as specified & directed.

Dismantling of stone slabs,cudappah, of any description or thickness in floor/fixed to walls, apron etc laid bedded and pointed in cement mortar complete all as specified.

M & L for granite stone slab 18 to 20 mm thick black/red colour (of any type) work (table rubbed, and polished) in staircase steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl Screed bed or bedding layer of mortar 20 mm thickin cm (1:6) for laying floor finishes complete all as specified and as directed.

M&L for Machine cut cudappah stone slab 20 to 25mm thick over 20 mm th cement screed base in cm 1:6 , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Labour only for full round moulding to 18 to 20mm thick granite slab complete all as specified and directed.

S&F in repairs 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 15 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repairs 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Supply & fixing stainless steel plate rack, made out of 1.00mm thick sheet of size 75 cm x 75 cm fixed as in repairs complete all as specified and directed.

M&L for 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete complete all as specified and directed.

S & F stainless steel grating doom 125mm dia complete all as specified and directed.

Repair to existing aluminium door/Window by replacing of rubber beading, aluminium beading, screws, replacement / refixing of glass and other accessories like door closer, hinges as reqd and making door functional incl taking down if reqd and reassemble door complete all as specified and directed. Note- door closer, floor spring, glasspanes will be measured separately.

De-watering from the existing service water tanks of capacity exc 250 ltrs and n.exc 500 ltrs kept over roof slab/staging of any height and cleaning internal surfaces of tanks to remove the deposited scales, dirt, mud and other foreign materials, rubbing with water using coir/jute brushes and washing the surfaces with fresh water, cleaning the inner surfaces with mixture of bleaching powder and water and finally washing with fresh water including taking down existing float valve and re-fixing the same in position after cleaning complete all as specified and directed.

All as per item no 143 above but exceeding 500 ltr and not exceeding 1000 ltr in capacity complete all as specified and directed.

Sky Vision Construction (BID ID -3253392)

Mehta and Co. (BID ID -3248174)

M/S Narendra Construction (BID ID -3247858)