Bush cleaning, plinth protection work, repairing of patrolling roads and hard stands, and repairing of some drains, in the premises and surroundings of Central Store Tadali

SCHEDULE-B (Items from/ based on Standard Schedule of Rates): Item no. 1.01 to 1.16

Cutting/ uprooting & clearing rank vegetation, grass, bushes, shrubs, brush-wood, trees and saplings of girth up to 30 cm (measured at a height of 1 mtr above ground level), removal of stumps of trees cut/ fell earlier, and stacking of serviceable & unserviceable materials at separate designated places within a lead of 100 metres, as per instructions of WCL. Wherever the work is not feasible through mechanical means, or working by mechanical means is likely to cause damages to nearby buildings, structures, boundary walls, fencings, pipelines, cables, etc., the work is to be done through manual means. Each worker must be equipped with the required safety gear/ accessories (gum-boots, hand gloves, face masks (if required), raincoats (if required as per weather), etc.). The cost is including all leads & lifts; cost of hydraulic excavator/ dozer, other equipment/ tools (gardening scissors, axe, phawda, ghamela, etc.), operators & other workers, fuel, carriage/ transportation cost, & safety gear/ accessories for the workers, etc. all complete. Note: This job is to be done 2 times – once before monsoon and once after monsoon. Each time shall be counted separately for measurement & payment. Therefore, the unit rate is for one time.

Trimming/ pruning branches of some trees through manual means using chain-saw machine, and stacking of serviceable & unserviceable materials at separate designated places within a distance of 100 metres. The contractor is required to provide one suitable & experienced wood-cutter person per day, as & when directed, for this job. Each worker must be equipped with the required safety gear/ accessories (helmet, safety shoes, safety harness, hand gloves, etc.). The cost is inclusive of labour, equipment/ tools (chain-saw machine, ladder, etc.), safety gear/ accessories for the workers, all leads & lifts, etc. all complete. If chain-saw machine deployed is not in working condition, then no measurement shall be made for item.

Cleaning of open drains by removing silt, sludge, dead vegetation such as leaves, grass, weeds, garbage, etc. such that the bed of the drain is clearly visible, rubbish to be deposited at specified place within a lead of 100 mtr, as per directions of the department. Each worker must be equipped with the tools/ equipment required for the job (phawda, kulhadi, ghamela, etc.) and safety gear/ accessories (including gum-boots, hand gloves, face masks (if required), raincoats (if required as per weather), etc.): Inner width upto 0.30 mtr.

Cleaning of open drains by removing silt, sludge, dead vegetation such as leaves, grass, weeds, garbage, etc. such that the bed of the drain is clearly visible, rubbish to be deposited at specified place within a lead of 100 mtr, as per directions of the department. Each worker must be equipped with the tools/ equipment required for the job (phawda, kulhadi, ghamela, etc.) and safety gear/ accessories (including gum-boots, hand gloves, face masks (if required), raincoats (if required as per weather), etc.): Inner width above 0.30 mtr & upto 0.50 mtr.

Total impact of GST for the purpose of CTC