REPAIR AND MAINTENANCE OF CHARPOY GI PIPE AND CERTAIN FURNITURE ARTICLES UNDER GE (NORTH) MEERUT CANTT

Amount

Charpoy GI Pipe (Drg No-FD-220) Segregating the repairable Charpoy GI Pipe at Furniture Yard of BSO (North) Meerut and removing the old unserviceable / damaged part from the charpoy GI pipe, M&L to replace the same with new parts duly matched with the existing parts and completely finishing the same with size and shape all as specified, shown on drg and as directed by Engr-in-Charge and stacking the repaired furniture in the proper place and make it ready for further issue complete all as specified and directed.

Removal and replacement of broken or unserviceable long rail of 32 mm medium grade GI pipe as per drg compete all as specified and directed.

Cutting of long Rail obtained from Sl No 1.1 and convert into short rail including threading at both ends as required and fixing in repair of charpoy compete all as specified and directed.

Cutting of short rails and converting into legs including threading at one end as required and providing with 3 mm base plate duly welded and fixing in repairs of charpoy complete all as specifed and directed.

S & F in replacement MS checknut as per drg complete all as specified and directed

S & F is replacement of 3 way elbow as per drg and required complete all as specifed and directed.

Removing of old broken middle rail of 25 mm dia GI pipe and provision of new one as specified by Engr-in-Charge and fixing the same by welding in the middle of both the long rail complete all as specified and directed

Removing of old unserviceable 12 mm thick ply from top of the charpoy GI pipe and providing 12 mm Ply wood BWP grade ISI marked conforming to IS: 710 of size 6.5' x 3' Plywood shall be fixed on the top of Charpoy frame with suitable size of 09 Nos half round stainless steel nuts and bolts with washer at bottom completely all as specified and directed by Engr-in-Charge.

POLISHING (PU Polish) : M & L for preparation of old wooden surfaces by grinding through grinding machine including filling of cavities, dent, scratches or gouges with wood filler followed by application of sealer (i.e a mix of polyurethene and mineral spirit) and polishing with Polyurethane Polish (PU Polish) by following the complete process of application of polyurethane polish to achieve high glossy finish to the following wooden furniture complete all as specified and as directed :-

Table Dining 06 Person (FD-273/ FD/E6/MAP/03)

Table Dining 08 Person (FD-273/ FD/E6/MAP/03)

Table Dining 1200 x900 (JCOs/OR) (FD-E6/MAP/03)

Table peg (FD-277)

Table 900 x 600 mm with / without drawer (FD-223/224 / 283/ 284)

Table Centre (FD-274)

Table dressing Gents with mirror (FD-230)

Table dressing Ladies with mirror (FD-251)

Table Writing (FD-275)

Chair Dining FD (FD-279)

Chair Writing (FD-280)

Side Board (FD-241)

Sofa Set 05 seater with cushion FD-281 / FD/MAP-II/02

Sofa Set 04 seater with cushion (FD-281)

Chair Dining Offrs (MAP) (FD/MAP-II/04)

Table bed side (FD-276)

Bed Ply Top (FD-246 & 247)

Bin Linen Multipurpose (FD-E6/MAP/09)

Teapoy (FD-278)

Chair Easy (FD-17 (M)/ 201/ 229/ 281)

PAINTING :- M&L for removing existing paint (on internal & external surface completely) by application of paint remover / grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint (dual tone in such a manner that body of Almirah/ Locker shall be of one colour and door of Almirah/ Locker shall be of another colour) make/colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the following steel furniture items complete all as specified and as directed :-

Almirah large steel (FD-1031)

Almirah large steel 1/2H,1/2S (FD-E6/MAP/18)

Almirah medium steel (FD-1032)

Bed hard steel (MAP) (FD-E6/MAP/08 (R)

Charpoy IP Hard Top (MAP) (FD-MAP-II/01)

Chair Writing (MAP) (FD-E6/MAP/12)

Tabel 3'x2' with/ without drawer steel (FD-2007 / 1008)

Table Office Officer's Steel (FD-1003)

Table Office Clerk Steel (FD-1004)

Locker Bed Side Steel (FD-257 / 1029)

CHAUDHARY FURNITURE HOUSE (BID ID -3384892)

Sunny Furniture Centre (BID ID -3383345)

Laxmi Furnitures & Engg (BID ID -3388086)

M/S AMAR ELEKTRO CENTRE (BID ID -3384781)

M/S NEHAL ENTERPRISES (BID ID -3392106)

RAM SAFE INDUSTRIES (BID ID -3392350)