Constructing RCC GSR of 60000lit and Providing pipeline Tal Dapoli

Item no 1 :- Providing and supplying G I Pipes of following class and daimeter including transporting loading ,unloading paying octrio charges etc

Item No. 2 -Designing (aesthetically), and constructing RCC GSR service reservoirs /RCC sump in m 300 mix of required capacityincluding Excavation in all type of strata fondation concrete, container wall, bottom slab,top RCC roof slab/dome 20 mm tk cement plaster with water proofing compund in cm 1:3 proportion to inside face of container including epoxy paint from in side in cluding refiiling and dispossing of surpluse stuff within lead of 50 meter all labour and material charges including lowering, laying,erecting,joisting and jointing of pipe assembly of inlet,outlet,washout,

note*Cost of 50,000 litres capacity is 770682.00 Add 9.33rs per lit for capacity above 50,000 upto 75,000 litres

Item No. 3 - -Excavation for foundation / pipe trenches in earth soil of all type sand gravel and soft murum including removing excavated material up to distance of 50 m. and lift as bellow stacking spreading as directed normal dewatering preparing the bed for foundation excluding back filling ...etc

Item No. 4 --Providing and supplying in stander lengthspolyethelene pipe conforming to IS 4984/14151/12786/13488 with necessory jointing material like mechanical connector i.e. threded/insert joint/quick release coupler joint/compression fitting joint or flanged joint including all central and local taxces,loading un loading conveyance to the dept.store/site and stacking the same in a closed shed duly protected from sun rays and rains etc .complete.

75 MM dia H.D.P.E. Pipe 8 Kg/cm2

63 MM dia H.D.P.E. Pipe 6 Kg/cm2

Item 5 --Lowering laying and jointing HDPE Pipes by heating to the ends of pipe with the help of tefflon coated electick mirror/heater to the requaired temparature and then pressing the ends togather against each other to form a monolithick and leack proof joint by themosetting process, the pressing may be requaired to be done with Jack/ Hydroli jack/ Butt fusion machine etc complete with material labours as directed by Engineer in charge including giving satisfactory hydrlic test.

75 MM dia H.D.P.E. Pipe 8 Kg/cm2

63 MM dia H.D.P.E. Pipe 6 Kg/cm2

Item 6 - Providing double flanged sluice valve confirming for IS2906/14846 including worn gear arrangement as per test pressure stanless steel spindal, cap including all taxes transportation etc.

Item No. 7 -lowering laying and jointing in position following C.I.D/FReflux valve,Butterfly valve and Sluice valve including cost of all labour jointing material including nut bolts and giving satisfactory hydraulic testing etc. complete. (rate for all class of valve)

Item No 8 :-- Providing and Fixing Name Board

Please Enable Macros to View BoQ information