Karnataka

Active

Works

Buildings

Construction of 400 metre synthetic athleatic track in Haveri district stadium

Public Works Department

PWD Division Office Haveri | haveri, Karnataka

Amount: ₹8.1 CrCloses: 23 Jul 2026

Tender Value

₹8.1 Cr

EMD Value

₹12.1 L

Closing Date

23 Jul 2026, 9:30 pm

Tender Inviting Organisation

Name

Public Works Department

Work Description

Construction of 400 metre synthetic athleatic track in Haveri district stadium

Tender Information

Tender ID

PWD/2026-27/BD/WORK_INDENT35506/CALL-2

Reference Number

PWD/2026-27/BD/WORK_INDENT35506/CALL-2

Tender Type

Open

Product Category

Buildings

Location

PWD Division Office Haveri

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredPWD Registration Certificate

RequiredSimilar nature of Work done Certificate issued by competent authority not below the rank of Executive Engineer

RequiredBankers Certificate Line of credit certificate, Certificate should be as per format mentioned in the GO copy is attached and conditional LOC is not accepted Otherwise tender will be rejected.

RequiredMachinery and Equipments

RequiredAnnual Turnover Certificate & Balance Sheet Turnover Certificate should be with UDIN Number

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Processing Fee and EMD into the respective receiving bank accounts of e-Karnataka Public Procurement Portal on or before the last date and time of bid submission.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Karnataka Public Procurement Portal due to internet connectivity issues and technical glitches at bidders end.

Bidder shall pay Contract Management Module processing fees is as per KPPP generate

Conditional tenders will not be accepted.

As per karnataka state government order LD/300/LET/2006 Bangalore dated 01-01-2007 and Govt letter No.PW/134/BMS /2007/dated 27-07-2007, a sum amounting to 1 percent of the bill amount will be deducted towards constructions labour welfare fund.

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders

All the documents to be uploaded shall be neatly scanned and the documents scanned shall be in original.

Any discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected.

All the Formats prescribed in the bid documents shall be filled in complete manner. ( section 3 & 4 of the bid document ) and shall be uploaded properly, signed by Tenderer. Necessary Certificates shall be uploaded along with the formats wherever required. General documents Section can be used for this purpose.

Tenderers are requested to read the Bid Documents before submission of their bid.

The Tenderer should submit proposed methodology and program of construction, backed with equipment and materials duly supported with broad calculations and quality management, plan, proposed to be adopted, justifying of execution and completion of the work as per technical specifications within the stipulated period of completion.

Department will not supply any materials.

The cost of the Tender form shall not be refundable.

The employer is not responsible for any delay in accessing E-Karnataka Public Procurement Portal.

The Employer reserves the right to reject one or all tender without assigning any reasons.

Contractors should Registered in KPWD and copy should be uploaded in E-Karnataka Public Procurement Portal Attested by the Gazzeted officers not below the rank of Executive Engineer.

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, PWD Division Haveri during office hours on all working days. It may be noted that if any of the dates mentioned above happened next working day will holds good in lieu of the dates mentioned.

Work Completion/ Execution Period : 09 Months

Each Tenderer should further demonstrate: liquid assets and/or availability of credit facilities of not less than Rs.269.03 lakhs Credit lines/letter of credit/ certificates from the banks for meeting the fund requirement etc. (Certificate should be as per format mentioned in the GO No.FD-CAM/16/2022(P-2)Dated: 12-08-2022 attached and conditional LOC is not accepted Otherwise tender will be rejected)

DEFECT LIABILITY PERIOD: The Defects Liability Period is 1 Year. The Defects Liability period starts, after successful completion of work

Any Deviation/Error/mistake found in units of items, they should be read as in the Unified SR 2023-24 (continued for 2026-27) and subsequent Corrigendums and the rates shall be quoted accordingly.

The EMD of Rs.12,11,000/shall be made through e-payment or in Two parts-Part (1) Rs. 1,00,000 /- by e-payment Part (2) Rs.11,11,000/- Shall be in the form of Bank Guarantee, in the prescribed format, obtained from any Nationalized / Scheduled bank in favor of Executive Engineer, PWD, Division, Haveri which should be scanned & uploaded to the e Karnataka Public Procurement Portal while submitting the tender. Original Bank Guarantee of the part (2) of EMD shall be delivered to the Executive Engineer, PWD , Division, Haveri at the time of agreement.

The Bid document clause No.34.4 to be implemented as per delegation of power vide GO No.PWD/423/FC-1/ 2018/Bengaluru/Dated: 24-09-2018.

Star Rates will be applicable as per Government Circular No. PWD 159/CRM/2009/ Bangalore/Dated: 30-09-2010 or any other relevant Government Orders

Estimate Rates are Exclusive of 18% GST

The bidder should eligible in the bidder criterias enclosed.

Financial turnover of previous years shall be given a weightage of 10% per year to bring them to the price level of the 2026-27 in the Technical Qualification Criteria mentioned in the next section

Bidder shall pay Contract Management Module processing fees of 0.025 percant of the contact value Min Rs. 500.00 or and Max Rs.7500.00 or soon after contract has been issued to bidder.

Technical Criteria

Past Experience

Executed in any one year the following minimum quantities of work Earthwork 4447.40 Cum PCC/RCC 112.89 Cum GSB 1408.77 Cum WBM/WMM 842.64 Asphalt work (Including BM/DBM/BC/SDBC) 421.32 Cum Synthetic Athletic track surface 5617.60 Sqm

Work Done Certificate

To qualify for award of this contract, each Tenderer in his name should have in the last five years 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26. 3.2(b) satisfactorily completed (at least 90% of the contract value), as prime contractor, at least one similar work such as CONSTRUCTION OF SYNTHETIC ATHLEATIC TRACK work of value not less than Rs 403.55 Lakhs (usually not less than 50% cost of the work)

Work Done Certificate

Capabilities of Vendor

Qualification and experience of the key technical and Management personnel in permanent employment with the Tenderer and those that are proposed to be deployed on this work, if work is awarded

Others -- Bio data of the personnel

Owning the following key and critical equipment for this work A) Key Equipment:- 1) Hot Mix with plant (minimum capacity of 40/60 TPH) -1 No Own 2) Mechanical Paver Finisher - 1 No. Own 3) Static road roller -1 No Own 4) Vibratory Road Roller - 1 No Own 5) Tippers- 2 Nos Own 6) Transit mixers 2 Nos Own B) Others Machinery:- 1) Pug mill (Suitable Capacity) - 1 No. Own/Lease/Hire 2) Excavator like JCB / Hitachi 1No Own/Lease/Hire 3) Tippers-2 Nos Own/Lease/Hire 4) Vehicle Mounted (tank) Mechanical sprayer - 1 No Own/Lease/Hire 5) Water Tanker-02 Own/Lease/Hire 6) Crane 2 Nos Own/Lease/Hire

Others -- Should scan and attach the requisite ownership documents/ hire/lease agreement with the Bid and prod

The EMD of Rs.12,11,000/shall be made through e-payment or in Two parts-Part (1) Rs.1,00,000 /- by e-payment Part (2) Rs.11,11,000/- Shall be in the form of Bank Guarantee, in the prescribed format, obtained from any Nationalized / Scheduled bank in favor of Executive Engineer, PWD, Division, Haveri which should be scanned & uploaded to the e Karnataka Public Procurement Portal while submitting the tender. Original Bank Guarantee of the part (2) of EMD, shall be delivered to the Executive Engineer, PWD, Division, Haveri, at the time of agreement.

Others -- Bank Guarantee/FDR

Financial Status

3.3 (b)Each Tenderer should further demonstrate: liquid assets and/or availability of credit facilities of not less than Rs.269.03 lakhs Credit lines/letter of credit/ certificates from the banks for meeting the fund requirement etc. (Certificate should be as per format mentioned in the GO No.FD-CAM/16/2022(P-2)Dated: 12-08-2022 attached and conditional LOC is not accepted Otherwise tender will be rejected)

Line of Credit

To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26. 3.2 (a) Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.1614.19 Lakhs (Turnover Certificate should be with UDIN Number)

Audited CA Certificate of Annual Turnover

Others

Constitutional and Legal Status of the Tenderer

PWD Registration Certificate (Class I/II/III/IV)

Principal Place of Business (Full address)

Others -- Address

Name and Address Telephone Nos. Fax Nos. and email ID of the Tenderers Bankers

Others -- Information on the Letter Head of the tenderer

The proposed methodology and program of construction, backed with equipment planning and deployment duly supported with broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion

Others -- CPM/PERT Chart

List of existing commitments and ongoing works

Others -- Information in Formats enclosed with this NIT

List of works for which tenders already submitted

Others -- Information in Formats enclosed with this NIT

Banker Details for reference

Others -- Banker

Information on works which are yet to be completed, Information of the works for which Tender Acceptance letters are recieved, Information of the works for which Tenderer has submitted Tender, Information on litigation in which the Tenderer is involved

Others -- Information in Formats enclosed with this NIT

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹12.1 L

Important Dates

Last Activity

29 Jun 2026

Published

29 Jun 2026

Bid Opening

24 Jul 2026

Download Ends

18 Jul 2026

Pre-Bid Meeting

18 Jul 2026

BOQ Preview

•

Providing and laying 400 metre synthetic athleatic track in Haveri district stadium

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

•

Granular Sub-Base - By Mix in Place Method - Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared sur...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying ...

•

Bituminous Macadam Grading - I for traffic <20 MSA - Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading premi...

•

Tack coat on Granular surface treated with primer - Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.25 kg/m2 on Granular Surface. R...

•

Semi Dense Bituminous Concrete - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading pre...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Cast in Situ Cement Concrete M20 Kerb - Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 15 grade foundation 150 mm t...

•

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

•

Cable Duct Across the Road - Providing and laying of a reinforced cement concrete pipe duct, 300 mm dia, across the road (new construction), extending from drain to drain in cuts and toe of sl...

•

Painting Lines, Dashes, Arrows etc on Roads in Two Coats on New Work - Painting lines, dashes, arrows etc on roads in two coats on new work with ready mixed road marking paint confor...

•

Mechanical Means -

•

Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all mater...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 ...

•

Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 55...

•

Desilting of sewerlines by mechanical (Jetting,Sucking,Grabber,Scrap per etc.,) means ,setting up the over pumping arrangements,rodding and dislodging of accumulative silt from the pipeline ,removal o...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. 15 HP, size 80x65 Head 44M, Discharge 900 LPM ----...

•

Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. 10 HP, size 80x65 Head 34.50M, Discharge 840 LPM -...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Compacting Original Ground - Compacting original ground supporting embankment - Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of emba...

•

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direc...

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat...

•

Surface Drains in perforated HDPE pipe - Supplying and laying at site Factory made perforated hard HDPE subsoil drainage pipes pre-wrapped with 150 gsm Geotextile for subsoildrainagesystemincluding al...

•

Precast Cement Concrete Interlocking Blocks - Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cy...

•

Seal Coat - Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A and B seal coats with bituminous binder VG-30 - Cas...

•

Providing and spreading of high quality weedicide over the prepared surface to avoid the growth of the weeds in the top surface ---- including equipments and all other incidental charges

•

Providing and laying IAAF/WF Class-II Synthetic Athletic track surface minimum 15mm thick (Full PUR system) as mentioned in IAAf/WA certificate incl. marking on the surface all completed as per specif...

•

Supplying and installation of hammer cage made out of Galvanized Steel in line with IAAF specification, the cage should be IAAF certified, the cost includes loading at hammer cage from manufacturer, t...

•

Providing and fixing of World Athletics (earlier IAAF) ApprovedField Equipments-Take of Board System (Long Jump) ---- including equipments and all other incidental charges

•

Providing and fixing of world athletics approved equipments-Take Off board System (Tripple Jump) ---- including equipments and all other incidental charges

•

Providing and fixing of World Athletics (earlier IAAF) ApprovedField Equipments.-Discuss Throw ring with Cage, Pole and Net ---- including equipments and all other incidental charges

•

Providing and fixing of world athletics approved equipments-Shotput throwing circle

•

---- including equipments and all other incidental charges

•

Providing and fixing of World Athletics (earlier IAAF) ApprovedField Equipments- Pole Vault ---- including equipments and all other incidental charges

•

Providing and fixing of world athletics approved equipments-Water Jump Hurdle ---- including equipments and all other incidental charges

•

Bermuda /S1 grass (Cyondon dactylon) as recommended by FiFA and ICC and BCCI is cut and rolled into 1ft x 6ft roll. therafter will be loaded shipped unloaded and laid directly on levelled surface of s...

•

Sprinkler and Accessories A Proving and fixing at fixing at large radius pop up sprinkler with gear driven mechanism having 2 female inlet. Dia of coverage 84.0m at 6.0 bar capble of delivering discha...

•

Providing and fixing of Rai Sprinkler of inlet 2 Female thread connection with dia of coverage 4086 meter at 2.5 kgcm2 with a discharge of 159657 LPM. It should be both part and fub circle adjustments...

•

Prividing and of 1 ONE PIECE BRESS ocvit has auto close lid mad of heavy duty rubberwhen QCV is not in use one pice construction having stainless steel spring brast valves. Haritindia Aqua infotec Ita...

•

Providing and fixing of 1brass QCV key with handle with 1 outlet. Haritindia aqua india irritechitaly

•

---- including equipments and all other incidental charges

•

Providing and fixing of 1brass QCV key brass swivel elbow. Haritindia aqua india irritechitaly

•

---- including equipments and all other incidental charges

•

Providing and fixing of metallic service saddle 110mmx1

•

---- including equipments and all other incidental charges

•

Providing and fixing of valve box 20 Reactangular valve box with cover the valve boxes shall be high strength high density polyethylene constructed material it should be UV stabilizer with anti oxidan...

•

Providing and fixing of valve box 6 round valve box with cover the valve boxes shall be high strength high density polyethylene constructed material it should be UV stabilizer with anti oxidants resis...

•

Providing and fixing of quick pressure relief valve size 2 along with bypass agreement cover and necessary fitting. It shall be adjustable pressure setting prom 22 PST for maximize performance. It sho...

•

Priving and fixing at a uble acting countinous air realies valve 2 made of alluminium. The continous air realies valve shall be capable of both releasing and admitting air from and into the line durin...

•

Providing and fixing at a uble acting plastic air release valve 2 made of high strength plastic with fiber glass reinforced. The air release valve shall be capable of both releasing and admitting air ...

•

Filtration unit providing and fixing at disk filter 120 mesh 50m3hr having an inlet and to outlets connections of 3.2 pressure gauze parts of 34a helix made of fiber glass reinforce polymide base of d...

•

Providing and fixing of 6 header assembly made of MS pipe with powder coating including footvalve ---- including equipments and all other incidental charges

•

Automation unit a providing and fixing of 3 BSP straight flow solenoid valve with flow control which shall be normally closed 24 VAC 5060 cycle solenoid actuated angle pattern design. The valve pressu...

•

Providing and fixing of single key start controller with sprinkler system HIT. ---- including equipments and all other incidental charges

•

Providing and fixing of water lavel sensor. Automat india Havels india. ---- including equipments and all other incidental charges

•

Providing and fixing of control panel 50HP with amaeter voltmeter and all necessary protection make land T or Eqivalent.

•

---- including equipments and all other incidental charges

•

Providing and fixing of 50HP 3 phase 2800RPM TEFCMotor Kirloskar make.

•

---- including equipments and all other incidental charges

•

Providing and fixing of world athletics approved equipments-Shot put Stop Board ---- including equipments and all other incidental charges

•

Providing and fixing of world athletics approved equipments-Aluminium Kerbing ---- including equipments and all other incidental charges

•

Lawn development : Supply of inputs such as sand, FYM, Red earth in 1:3:6 ratio.mixing and spreading the mixture to 7.50cm thickness wherever required ---- including equipments and all other incidenta...

•

Supplying,installing,testing andcommissioning of PN16 CI butterfly valves of confirming to IS 13039 with necessary nuts & bolts etc.,complete-etc.,complete as per specificaiton with all lead and lift,...

•

Pressure guage of 150mm dia including Isolation Valve and forged siphon Tube including with all accssories as per IS:Spec. etc., complete as per specificaiton with all lead and lift, loading unloading...

•

Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

•

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

•

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

•

Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...

•

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...

•

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

•

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x4 S...

•

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

•

Mechanical Means -

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of ...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting Each deposited layer by ramming after watering with a lea...

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing Size Stone masonry with hard stone in foundation & plinth with

•

Cement mortar 1:6 (1 cement : 6 coarse sand) ---- including equipments and all other incidental charges

•

RCC hume pipe Circular pump house: Providing precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of 2....

•

Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc.,c...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...

•

Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wi...

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.- 75x75...

•

Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring us...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.- 32Amps

•

---- including equipments and all other incidental charges

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

•

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.- 32-40 Amps 4 pole

•

---- including equipments and all other inciden...

•

Fixing a shunt capacitor of . KVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor.

•

---- including equipments and...

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

•

---- including equipments and all other incidental charges

•

Digging of Pit for providing GI Pipe type Earthing-Ordinary Soil

•

---- including equipments and all other incidental charges

•

GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg

•

---- including equipments and all other inci...

•

Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each

•

---- including equipments and all other incidental charges

•

Good Quality Salt for grounding purposes packed in 50 Kg gunny bag

•

---- including equipments and all other incidental charges

•

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +12...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable -2.5 to 25 Sqmm

•

---- including equipments and al...

•

Laying the GI Pipe 80 mm to 150 mm dia at Drainage Water Supply Crossing including fixing collars elbows, bends, Tees and other fitting with Cuts and Threads wherever necessary complete.

•

Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable-Up to 4C x 50 Sqmm

•

---- including equipments and all other incidental charges

•

Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. - 8 SWG GI Wire

•

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 Amps three phase 4 wire whole current class-1 Accuracy Energy Meter.

•

---- including equipments and all other incidental...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Full PUR Track Bidder Criteria.docx

Others - Bidder creteria • 0.02 MB

KW4 No 35506 Call-2.doc

Tender Document • 0.25 MB

LOC format.pdf

Others - LOC Format • 1.75 MB

STAR RATE GO.pdf

Others - Star Rates • 0.68 MB

Ready to Participate?

Download all tender documents and submit your bid