Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.5 LAccepted-AOC NEAR OLD CCS JUNGLIGHAT SRI VIJAYA PURAM 744 103 | SRI VIJAYA PURAM | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹42.1 L+₹3.2 L (8.29%)Rejected-Finance 956 2 CHANDERSEKER ENTERPRISE OPP MARICAR HOSPITAL OLD CCS JUNGLIGHAT SOUTH ANDAMAN ANDAMAN NICOBAR 744103 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹42.9 L+₹4.0 L (10.4%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹44.6 L+₹5.8 L (14.8%)Rejected-Finance GURDASPUR ROAD OPP WAREHOUSE PATHANKOT 145 001 PB | PATHANKOT | PUNJAB | 145001 | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹45.2 L+₹6.3 L (16.2%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹42.6 L
EMD Value
₹85,200
Closing Date
25 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Haddo
GARRISON ENGINEER HADDO Military Engineer Services Haddo Post Port Blair Andaman and Nicobar 744102
ADDITION / ALTERATION TO FRESH WATER LINE OF CG JETTY AND CONNECTED ITEMS UNDER GE HADDO
2023_MES_573359_1
8713/GE/H/PB
Open Tender
Civil Works
Item Rate
180 days
GE Haddo Port Blair
Class D and Category a(ii)
9 documents required · 9 mandatory
₹500
GE Haddo
₹85,200
Yes
1 Mar 2023
6 Jan 2023
28 Jan 2023
6 Jan 2023
25 Jan 2023
20 Jan 2023
6 Jan 2023 - 13 Jan 2023
Amount
S&F to wall, laid in trenches, laid under floor, wall ceiling GI tubing medium grade ISI marked complete with all fittings, accessories all as directed of following sizes :
80mm dia
50mm dia
S&F gunmetal/brass gate valve, conforming to IS-778, ISI marked, with iron wheel head screwed at both ends for iron pipes or ferrule and fixing including necessary fittings like,flang, unions, check nuts, etc and any addition / alteration required for fixing, as fixed in repairs complete all as specified and as directed by the Engineer-in-charge of the following diameters:
50mm dia
80mm dia
Material,labour and laying of ductile iron pipe flanged type (both end flanged) centrifugally cast (spun) including suitable specials class A, K-9, in any length, laid in trenches/floors or on supporting pillar of following sizes as per IS-8239/2000 and with inside cement mortar lining and out side with blue in colour complete all as specified and as directed. Note : cost includes the suitable GI nuts and bolts.
Material,labour and laying of ductile iron pipe socket spigot centrifugally cast (spun) including suitable specials class A,K-9, in any length, laid in trenches/floors or on supporting pillar of size 150 mm dia as per IS-8239/2000 and with inside cement mortar lining and out side with blue in colour complete all as specified and as directed.Note : cost includes the suitable GI nuts and bolts.
Supply and fix sluice valve, class PN-1.6 flanged and drilled at both ends confirming to IS:14846 with ISI mak, having stainless steel spindle and gun metal rings including wheel for operation all as specified including all joints with rubber gasket and jointing materials, bolts, nuts, washers etc with the following sizes complete all as specified and as directed.Note : cost includes the suitable GI nuts and bolts.
150 mm bore
100 mm bore
80 mm bore
Material and labour for construction of Brick Masonary valve chamber of size 1000x1000x1000mm (internal dimensions) with PCC 1:4:8 foundation 100mm thick, brick work using PCC block masonary 200 thick wall built in CM 1:6,PCC 1:3:6 coping 50mm thick, plastering 15mm thick in CM 1:6 to all internal wall including floor,and exeternal wall upto 150mm below ground level, including excavtion earth work in hard/dense soil, MS sheet cover 4mm thick with locking arrangement with ISA 50x50x6 mm frame embedded in PCC and painting to MS cover with two coats of synthetic enamel paint over one coat of red oxide primer etc complete all as specified and directed
Taking down the existing pipe line of any size and any type of CG jetty fresh water line all as specified and as directed
M & L Lifting RCC cover slabs of size 2 to 4 meters long, 1 to 1.5 meter width and upto 300mm thick and about 2 to 4 tons in weight lying on jetty by cutting /chipping the clearance groove all around ,keeping aside using a crane for layiing of new LT cables/water pipe line including removing of old water pipes of any type and any size and making good surface with PCC 1:2:4 complete all as specified and as directed. Note : (a) two or three slabs shall be taken out/removed as per site condition for laying the new water pipe line in the span of 4 to 5 meters, as per site requirement extra slabs if required to remove it will be also measured separately (b) Cost of T & P required for the work shall be included in the quoted rate. (c) Site will be available in a restricted manner and prior approval shall be obtained before work (d) Contractor is liable for any damage caused to existing services or structtures during the execution of work.
M& L for Demolition of fresh water outlets PCC chambers for and create hole for fixing the new outlets as required and making good the disturbed portion with required PCC of 1:2:4 as per site condition complete all as specified as directed by Engr-In-Charge.
Taking out old serviceable 80mm/100mm sluice valves care fully and refacing, regrinding and refixing the same at site as per requirement as directed by Engr-In-Charge. Note : fitting CI/DI specials measured and paid separately
Material and labour for Run lead joints (good quality) as per SSR Part-I suitable for 150mm bore complete all as specified and as directed.
Material and labour for Run lead joints (good quality) as per SSR Part-I suitable for 100mm bore complete all as specified and as directed.
Material and labour for rubber gasket (Tyton joints) for 150mm bore DI pipe complete all as specified and as directed.
Material and labour for rubber gasket (Tyton joints) for 100mm bore DI pipe complete all as specified and as directed.
Material and labour for flanged joints (ISI Mark) including rubber of minimum thickness 6mm and suitable size of MS nuts bolts and washers complete for 100 mm bore complete all as specified and as directed.
Taking up 150mm dia ductile iron pipe spigot and scoketed type from existing line and relaying the same at site as specified and as directed by Engr-In-Charge. Note : cost includes the suitable GI nuts and bolts.
Material and Labour for ductile iron fittings size upto 150mm such as, bends,tapers,tee,pieces(single and double branch) any type/angle/radius and straight connecting pieces but all ends flanged/spigot and socketed type upto 400mm dia bore complete including nuts,bolts and washers complete all as specified and as directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep for foundation of poles, stays and struts and getting out in hard/dense soil complete all as specified and directed.
Excavation in trenches not exceeding 1.5m wide and exceeding 1.5m deep and not exceeding 3m deep for foundation of poles, stays and struts and getting out in hard/dense soil complete all as specified and directed.
Returning, filling in, soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each layer as in soil complete all as specified and directed.
Removing excavated material/soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Material and labour for plain cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregate) as in foundation, filling and mass concrete including use and waste of from work complete all as specified and directed.
Material and labour for supporting pillar constructed of masonry of dimensions as required on site with precast cement concrete solid block masonry in PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) in CM (1:6) complete all as specified and directed.
M & Labour for cutting the existing bitumen road at a width of 0.6 to 1 meter in width,1 to 1.3 meter in depth and after laying the water pipe the disturbed soil is should be return and refilling it and well ramming the surface and make the disturbed surface with 150mm thick (minimum) PCC(1:2:4) type B1 mass concrete (using 20mm graded stone aggregate) complete all as specified and as directed
Supply and fixing 150mm dia new CI double out let air valve as per IS:14845 for fixing up in CI/DI water supply mains complete all as specified and as directed.
CHANDER SEKER ENTERPRISE
Energy Water Supply
BABBAR ENGINEERS
bansal construction
M/s S U Enterprises
CARTWHEEL CONSTRUCTION
JD Construction
M/s K Moorthi
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .