PROVN OF CERTAIN ADD ALT SPECIAL REPAIRS REVENUE AND MINOR WORKS UNDER GE C KIRKEE

Amount

Demolition of cement concrete (unreinforced) in ground floor and paving below or above GL complete all as specified.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for 15mm thick screed bed or bedding layer of cement mortar in CM (1:6) for laying of floor tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc, set jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L for rendering 10mm thick plaster in CM (1:4) on fair faces of brick work or concrete surfaces including finishing the surface fair and even all as specified and directed.

M&L for glazed ceramic tiles coloured in vertical surface (300 x 200 x 7mm thick) on walls, set & jointed in neat cement slurry & pointed coloured cement to match complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm in skirting/dado, set & jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for chequered cement concrete tiles glossy finish with grey cement and pigments 30 cm x 30 cm x25 mm thick, set jointed and pointed in neat cement slurry to be laid over and including screed bed or bedding layer of mortar 20mm thick average thickness in cement mortar 1:6 including demolition of existing tiles of any type/size and description complete all as specified.

M & L for 25 mm thick PCC (1:2:4) type B1 using 20mm graded stone aggregate as in levelling course for laying of floor tiles, finishing the surface fair and even without using extra cement complete all as specified.

Taking down and refixing in same opening with resecuring or easing & adjusting door shutters of any description exc 1 sqm and n. exc 2 sqm each all as specified.

Taking down and refixing in same opening with Resecuring or easing & adjusting door shutters of any description n exc 1 sq. m each complete all as specified.

Taking down cement mortar plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified.

M&L for rendering 15mm thick plaster in CM (1:4) on fair faces of brick work or concrete surfaces including finishing the surface fair and even using water proofing compound all as specified and directed. (Note: (i) Plaster work in upto Four story building on wall surface. (ii) Water proofing compound paid and measured separately)

M & L for preparation of plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots, moulds, moss efflorescent salts and treading oil and greasy spots and applying Two coats of Oil Bound Distemper complete all as specified and directed.

M&L for preparing new plastered surfaces of wall including preparation of surfaces and applying two coats of oil bound distemper over a coat of primer on wall surfaces complete as specified and directed.

Taking down chowkats and frame n.exc 1.5 Sqm each including shutters without taking off shutters from the frame and removing from site complete as specified and directed.

Taking down chowkats and frame exc 1.5 Sqm but n.exc 4.00 sqm each including shutter wiuthout taking off shutter from the frame and removing from site complete as specified and directed.

S&F aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick plain float glass and 0.56mm dia apperture 1.4mm SS wire mesh and fittings etc complete all as specified and directed.

S & F for frame work such as grill, grating etc with ends bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed.

S&F aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc all as directed.

M&L for Machine cut cudappah stone slab 18-20mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 15mm screed bed in CM 1:4, and dismantling existing stone/tiles complete.

M&L rendering 10 mm thick on concrete surfaces such as jamb, soffits for fixing window, ventilator etc in CM 1:4, finished even and smooth using sagol finish complete all as specified.

M&L for preparation new steel surfaces of any description exc 10 cm width or girth and applying two coats of Synthetic Enamle Paint over a coat of red oxide primer complete all as specified and directed.

M & L for preparation of plastered or unplastered old decorated surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of Oil bound distemper on walls complete as specified and directed.

M & L rendering 10 mm thick fair faces of brick work or concrete surfaces in CM 1:6, finished with sagol finish on plastered surface of internal wall, complete all as directed.

M&L for rendering 5mm thick in CM (1:3) on fair faces of brick work or concrete as in ceiling including finishing the surface even and smooth without using extra cement all as specified and directed.

Supply only integral water proofing compound(powder) complete all as specified and directed by Engr-in-Charge.

M&L for coloured Glazed ceramic tiles in vertical surface 300x 450x 7 mm/ 300X 600X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster in CM (1:4) and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6 including Demolition of existing floor tiles, stone slab of any description complete all as specified and directed.

S&F GI tubing 20mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors or concealed including taking down old existing and removable from site complete all as specified and directed.

S&F GI tubing 25mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors or concealed including taking down old existing and removable from site complete all as specified and directed.

S&F for 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 20 mm - 210 gms ) complete all as specified and directed.

S & F rotational moulded polythene water storage tanks of capacity 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I (2009) including dismantling of existing water tank complete all as specified and directed.

S & F rotational moulded polythene water storage tanks of capacity 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I (2009) including dismantling of existing water tank complete all as specified and directed.

Disconnecting existing tanks, capacity up to 500 ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.(Cleaning repairing, etc. measured separately)

Disconnecting existing tanks, capacity 1000 ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.(Cleaning repairing, etc. measured separately)

S & F in repair cast iron floor trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 100 mm, complete all as specified.

S & F in repair cast iron nahani trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 100 mm, complete all as specified.

S & F in repairs water closet (Squat Pattern) complete including provn of lime concrete bedding Orissa pattern size 580 x 440mm white integral foot rests (excluding flush pipe or flushing cisterns) including S&F PVC P trap 110mm bore dia, 110mm PVC (SWR) WC connector with lip ring and connection to flushing pipe anti syphonage pipe etc complete and making good to floor complete all as specified and directed.

S & F 110mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls or laid in floors as sanitary fittings, rain water pipes etc in any position including taking down old pipe in any type and position including all fittings complete all as specified and directed.

All as per item No 41 above but 75mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) bend with access door of any radius 110mm bore complete all as specified and directed.

S&F in repair PVC (SWR) branch piece (Double Y) equal or unequal with access door complete all as specified and directed.

S&F in repair 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.

All as per item No 45 above but 75mm dia complete all as specified and directed.

M & L for water proofing treatment comprising of the following using 3mm thick APP membrane polymer based to roof slab including taking down existing water proofing treatment of any type and plaster complete all as specified and directed:- (a) 10 mm thick cement plaster 1:3 with integral WPC to be laid over the RCC roof slab(WPC shall be measured and paid seperately). (b) Apply one coat of bituminous primer @ 0.25kg/sqm. (c) Laying 3mm thick APP polymer modified membrance by torch application method. (d) 24 hours ponding test after laying WP membrane. (e) Apply a coat of solar reflective bituminous aluminum paint @ 0.15kg/sqm.

M&L for preparation of new surface of ceiling of any description not otherwise provided & applying three two coat OBD with one coat of primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation of plastered surfaces and applying two coats of weather proof paint (Exterior grade) over a coat of alkali resistant primer all as specified and directed by Engr-in-Charge.

M & L for preparation of plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots, moulds, moss efflorscent salts and treading oil and greasy spots and applying two coat of Cement Base Paint complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling any description not otherwise provided applying two coat OBD complete all as specified and directed by Engr-in-Charge.

Surface excavation n. exc. 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.

M&L for providing Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for 100mm thick cement concrete 1:4:8 type D2, using 40 mm graded aggregate as in sub base of floor, mass concrete finished even and fair complete all as specified and directed.

M&L for coloured Machine pressed precast concrete interlocking paver block glossy finish (Two colour combination) any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade with grey cement and pigment laid over sand cushion complete all as specified and directed.

M & L 50mm thick Sand filling under floors for interlocking paver blocks including watering and consolidation complete all as specified and directed.

M&L for plain Cement Concrete 1:2:4 type B1 (using 20mm graded stone agg) as in benching, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates concrete including necessary formwork weathering slightely rounded or chamfered angles and throating complete all as specified and directed.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m depth in hard dense soil and getting out complete all as specified and directed.

M&L for PCC 1:4:8 type D2 ( Using 40mm graded agg) as in foundation and mass concrete complete all as specified and directed.

M&L for precast cement concrete block masonry with solid block type C1 (1:3:6) using 20mm graded stone aggregate exceeding 10cm in width and setting in CM (1:6) complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished surfaces complete all as specified and directed.

M&L Mild steel bars 10mm dia TMT bar and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25cm using soil complete all as specified and directed.

Removing excavated soil material n exc 50m and depositng where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in CM (1:4) complete all as specified and directed.

M & L preparing the new concrete or plastered suface of wall and applying two coat of cement base paint complete all as specified.

S & F rotational moulded polythene water storage tanks of capacity 2000 ltrs ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I (2009).

S&F GI tubing 20mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors or concealed complete all as specified and directed.

Supply and fix gun metal globe or gate valves 20mm bore of pipe, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Excavation in trenches n.exc 1.5m deep and 1.5m wide for manholes not exc 10 sqm on plan in any type of soil and getting out complete all as specified and directed.

M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

Supply only liquid water proofing compound @ 0.200 Ltr per 50kg of cement or as per manufacturers instruction complete all as specified and directed by Engr-in-Charge.

M&L mild Steel TMT steel bars as in reinforcement 6mm to 8mm dia cut to length bent to shape as required etc, including cranking bending spirally hooping for columns hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia all as specified and directed.

M&L precast Cement Concrete 1:2:4 type B1 (using 20mm graded stone agg) as in cover slabs for man holes etc set in cement mortar 1:6 including necessary form work complete all as specified and directed.

M&L for PCC 1:3:6, type C-1, using (20mm graded stone agg) as in surface channel and drain complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement, including forms, moulds mitred/stopped ends etc complete all as specified and directed.

M&L for Concrete bed to drain pipe 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40mm graded crushed stone agg) complete all as specified and directed.

M&L for Reinforced concrete pipes, class NP2, laid and jointed complete with collars 150mm bore laid and jointed on concrete bed complete including testing complete all as specified and directed.

S & F 10 users readymade RCC hume pipe septic tank 60cm dia and 243cm long over and including PCC platform 75mm thick PCC (1:5:10) type E-2 (using 40mm graded stone aggregates) & 300mm thick approved moorum filling below PCC, 100mm dia PVC vent type with cowl at top, connectors to inlet and out pipes, all as specified and shown on drawing No. CEPZ/91/TD/47M Sh 1/1/ of 16/12/91 including excavation in any type of soil/rock, RFR and removal of soil.

M & L for soakage pit including excavation in any type of soil/ soft disintegrated rock/hard rock, foundation in PCC (1:5:10) type E2, walls brick work in CM (1:6) , RCC (1:2:4) type B1 slab covers, filling with brick bats, complete of size 2.01x1.6x1.5 mtr all as specified and shown on drawing No CEPZ/90/TD/13 Sh 1/1 dated 19.07.1990.

Cutting into existing manholes for connecting new drains, Internal dia of pipe in 150mm making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and directed.

M/S JAYCONSTRUCTION CO

C J Enterprises

Shri Sant Cosntruction

V.R.PRAJAPATI AND CO.