Repair and Maintenance Municipal paver block roads in Colachel Municipality

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small boulders SS.20B and Sand, silt or other loose soil, wet sand, or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shorting shuttering and bailing out water and cleaning and leveling the site etc., complete 10 cum

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M-Sand) and Eight part of coarse aggregates) using 40 mm size ISS HBG metal including cost and conveyance of all materials to sitea and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification.

Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification.

Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam(WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per clause 406 of MORTH specification.

Supplying and laying interlocking Paver block Stone 83mm thick over a base layer of crushed stone sandfilling incl. Cost of materials laying and Labour charges etc complete complying with the standard specification and as directed by the departmental officers (BD DATA-425b)

Removing and Stocking of existing paver block of size 83mm/63mm thick carefully reuse at the site and laying Rubberized interlocking Paver block M40 grade(EXISTING PAVER BLOCK) 83mm thick high strength type confirming IS 15658-2006 of rubberized inerlocking paver block in size of minimum compressive strength of 40 N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shape of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, asnd cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring as directed by department officers.