Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹78.3 LAccepted-AOC 24 824 GOVERDHAN COLONY MAIN BHIND ROAD GOLE KA MANDIR | L1 | Accepted-AOC L1 | |
| 2 | L2₹94.0 L+₹14.2 L (17.7%)Rejected-AOC BLOCK C 14 GROUND FLOOR PLOT 618 624 BHIVANDIWALA TERRACE JAGANNATH SHANKARSHETH MARG DHOBI TALAO NEAR KALBADEVI POST OFFICE MUMBAI 400002 | MUMBAI | MAHARASHTRA | 400002 | L2 | Rejected-AOC Not L1 | |
| 3 | L3₹1.1 Cr+₹29.7 L (37.3%)Rejected-AOC | L3 | Rejected-AOC Not L1 | |
| 4 | L3₹1.1 Cr+₹29.8 L (37.3%)Rejected-AOC | L3 | Rejected-AOC Not L1 | |
| 5 | L5₹1.2 Cr+₹40.1 L (50.2%)Rejected-AOC MATHOSHREE PLOT NO 55 SR NO 787 A BEHIND ASHWANI HOSPITAL GOVIND NAGAR NASIK 422 009 | NASIK | NASHIK | MAHARASHTRA | 422009 | L5 | Rejected-AOC Not L1 |
| Sl No | Description | Qty | Unit | M/s Prem Associates L3 | AGRAWAL ASSOCIATES L2 | BRITE INDUSTRIES L4 | anand enterprises L1 | NATIONAL ENGINEERING CORPORATION L6 | Shree Ayyappa Engineering L7 | DURGAI ELECTRICALS L5 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Disconnecting, dismantling of existing LT feeder panel and supply, fabricate, install, testing and commissioning of LT feeder panel board of suitable size, out door type double door, dust and vermin proof made out of 3.15 mm thick MS sheet mounting on MS angle iron 50x50x6 MM size , height of legs as per the site requirement, suitable foundation of 150 mm thick PCC (1:3:6) type C 2 with 100 mm offsets and panel board with front and back opening and locking arrangement compete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including oriental bus bar of aluminium strip 800 amps for three phase 4 wire including the following accessories and fitted in : | 1 | Each Job | 3,56,000 ₹3,56,000 | 3,00,000 ₹3,00,000 | 3,51,637 ₹3,51,637 | 2,45,000 ₹2,45,000 Lowest | 4,50,000 ₹4,50,000 | 5,20,000 ₹5,20,000 | 5,50,000 ₹5,50,000 |
| 1.10(a) Incoming: (i) MCCB high breaking capacity 4 pole 415 volt 36 KA breaking cap adjustable thermal release range 400 amp – 01 No (ii) Digital type Volt meter & amps meter with suitable capacity of CTs,LED indicator lamp and other connecting accessories (b) Outgoing: (i) MCCB AC high breaking capacity 3 pole 415 volt 25 KA breaking cap adjustable thermal release range 250 amp – 02 Nos (ii) MCCB AC high breaking capacity 3 pole 415 volt 16 KA breaking cap adjustable thermal release range 125 amp – 04 Nos (iii) MCCB AC high breaking capacity 3 pole 415 volt 16 KA breaking cap adjustable thermal release range 63 amp – 8 Nos (iv) Three phase digital Timer switch with suitable cap of contactor controlled by existing 63 amp MCCB for street light, (v) MCB SPN 40 Amps - 6 Nos | ||||||||||
| 2.00 | Disconnecting, dismantling of existing LT feeder panel and supply, fabricate, install, testing and commissioning of LT feeder panel board of suitable size, out door type double door, dust and vermin proof made out of 3.15 mm thick MS sheet mounting on MS angle iron 50x50x6 MM size , height of legs as per the site requirement, suitable foundation of 150 mm thick PCC (1:3:6) type C 2 with 100 mm offsets and panel board with front and back opening and locking arrangement compete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including oriental bus bar of aluminium strip 800 amps for three phase 4 wire including the following accessories and fitted in : - | 1 | Each Job | 4,60,000 ₹4,60,000 | 4,00,000 ₹4,00,000 | 4,65,079 ₹4,65,079 | 3,25,000 ₹3,25,000 Lowest | 5,50,000 ₹5,50,000 | 5,80,000 ₹5,80,000 | 6,13,311 ₹6,13,311 |
| 2.10(a) Incoming: (i) MCCB high breaking capacity 4 pole 415 volt 36 KA breaking cap adjustable thermal release range 400 amp – 01 No (ii) Digital type Volt meter & amps meter with suitable capacity of CTs,LED indicator lamp and other connecting accessories (b) Outgoing: (i) MCCB AC high breaking capacity 3 pole 415 volt 25 KA breaking cap adjustable thermal release range 160 amp – 16 Nos (ii) MCCB AC high breaking capacity 3 pole 415 volt 16 KA breaking cap adjustable thermal release range 63 amp – 2 Nos (iii) Three phase digital Timer switch with suitable cap of contactor controlled by existing 63 amp MCCB for street light, – 1 No (iv) MCB SPN 40 Amps - 6 Nos | ||||||||||
| 3.00 | Disconnecting, dismantling of existing LT feeder panel and supply, fabricate, install, testing and commissioning of LT feeder panel board of suitable size, out door type double door, dust and vermin proof made out of 3.15 mm thick MS sheet mounting on MS angle iron 50x50x6 MM size , height of legs as per the site requirement, suitable foundation of 150 mm thick PCC (1:3:6) type C 2 with 100 mm offsets and panel board with front and back opening and locking arrangement compete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including oriental bus bar of aluminium strip 800 amps for three phase 4 wire including the following accessories and fitted in | 2 | Each Job | 5,53,000 ₹11,06,000 | 4,75,000 ₹9,50,000 | 5,80,183 ₹11,60,366 | 3,90,000 ₹7,80,000 Lowest | 6,00,000 ₹12,00,000 | 6,10,000 ₹12,20,000 | 6,30,445 ₹12,60,890 |
| 3.10(a) Incoming: (i) MCCB high breaking capacity 4 pole 415 volt 36 KA breaking cap adjustable thermal release range 400 amp – 01 No (ii) Digital type Volt meter & amps meter with suitable capacity of CTs,LED indicator lamp and other connecting accessories (b) Outgoing: (i) MCCB AC high breaking capacity 3 pole 415 volt 25 KA breaking cap adjustable thermal release range 160 amp – 18 Nos (ii) MCCB AC high breaking capacity 3 pole 415 volt 16 KA breaking cap adjustable thermal release range 63 amp –02 Nos (iii) Three phase digital Timer switch with suitable cap of contactor controlled by existing 63 amp MCCB for street light, – 1 No (iv) MCB SPN 40 Amps - 6 Nos | ||||||||||
| 4.00 | Disconnecting, dismantling of existing LT feeder panel and supply, fabricate, install, testing and commissioning of LT feeder panel board of suitable size, out door type double door, dust and vermin proof made out of 3.15 mm thick MS sheet mounting on MS angle iron 50x50x6 MM size , height of legs as per the site requirement, suitable foundation of 150 mm thick PCC (1:3:6) type C 2 with 100 mm offsets and panel board with front and back opening and locking arrangement compete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including oriental bus bar of aluminium strip 800 amps for three phase 4 wire including the following accessories and fitted in : - | 1 | Each Job | 3,75,000 ₹3,75,000 | 3,25,000 ₹3,25,000 | 4,11,649 ₹4,11,649 | 2,75,000 ₹2,75,000 Lowest | 4,25,000 ₹4,25,000 | 4,50,000 ₹4,50,000 | 4,41,000 ₹4,41,000 |
| 4.10(a) Incoming: (i) MCCB high breaking capacity 4 pole 415 volt 36 KA breaking cap adjustable thermal release range 400 amp – 01 No (ii) Digital type Volt meter & amps meter with suitable capacity of CTs,LED indicator lamp and other connecting accessories (b) Outgoing: (i) MCCB AC high breaking capacity 3 pole 415 volt 16 KA breaking cap adjustable thermal release range 100 amp – 10 Nos (ii) MCCB AC high breaking capacity 3 pole 415 volt 16 KA breaking cap adjustable thermal release range 63 amp –06 Nos (iii) Three phase digital Timer switch with suitable cap of contactor controlled by existing 63 amp MCCB for street light, – 1 No (iv) MCB SPN 40 Amps - 6 Nos | ||||||||||
| 5.00 | Disconnecting, dismantling of existing LT feeder panel and supply, fabricate, install, testing and commissioning of LT feeder panel board of suitable size, out door type double door, dust and vermin proof made out of 3.15 mm thick MS sheet mounting on MS angle iron 50x50x6 MM size , height of legs as per the site requirement, suitable foundation of 150 mm thick PCC (1:3:6) type C 2 with 100 mm offsets and panel board with front and back opening and locking arrangement compete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including oriental bus bar of aluminium strip 800 amps for three phase 4 wire including the following accessories and fitted in : - | 8 | Each Job | 4,60,000 ₹36,80,000 | 4,00,000 ₹32,00,000 | 4,50,736 ₹36,05,888 | 2,25,000 ₹18,00,000 Lowest | 5,50,000 ₹44,00,000 | 5,10,000 ₹40,80,000 | 5,74,000 ₹45,92,000 |
| 5.10(a) Incoming: (i) MCCB high breaking capacity 4 pole 415 volt 36 KA breaking cap adjustable thermal release range 400 amp – 01 No (ii) Digital type Volt meter & amps meter with suitable capacity of CTs,LED indicator lamp and other connecting accessories (b) Outgoing: (i) MCCB AC high breaking capacity 3 pole 415 volt 25 KA breaking cap adjustable thermal release range 160 amp – 14 Nos (ii) MCCB AC high breaking capacity 3 pole 415 volt 16 KA breaking cap adjustable thermal release range 63 amp –02 Nos (iii) Three phase digital Timer switch with suitable cap of contactor controlled by existing 63 amp MCCB for street light, – 1 No (iv) MCB SPN 40 Amps - 6 Nos | ||||||||||
Tender Value
₹1.4 Cr
EMD Value
₹2.2 L
Closing Date
16 Aug 2025, 6:00 pmClosed
COL SAIKAT DE CWE NAVY VASCO
CWE NAVY VASCO VASCO DA GAMA GOA 403802
SPECIAL REPAIRS FOR REPLACEMENT OF EXISTING UNSERVICEABLE FEEDER PANELS OF SITE A AT NAVAL BASE KARWAR
2025_MES_721401_1
85974
Open Tender
Civil Works
Item Rate
KARWAR
Please refer Tender documents.
9 documents required · 9 mandatory
₹1,000
GE(SB) KARWAR
₹2.2 L
Yes
3 Oct 2025
18 Jul 2025
18 Aug 2025
18 Jul 2025
16 Aug 2025
9 Aug 2025
Amount
Disconnecting, dismantling of existing LT feeder panel and supply, fabricate, install, testing and commissioning of LT feeder panel board of suitable size, out door type double door, dust and vermin proof made out of 3.15 mm thick MS sheet mounting on MS angle iron 50x50x6 MM size , height of legs as per the site requirement, suitable foundation of 150 mm thick PCC (1:3:6) type C 2 with 100 mm offsets and panel board with front and back opening and locking arrangement compete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including oriental bus bar of aluminium strip 800 amps for three phase 4 wire including the following accessories and fitted in :
(a) Incoming: (i) MCCB high breaking capacity 4 pole 415 volt 36 KA breaking cap adjustable thermal release range 400 amp – 01 No (ii) Digital type Volt meter & amps meter with suitable capacity of CTs,LED indicator lamp and other connecting accessories (b) Outgoing: (i) MCCB AC high breaking capacity 3 pole 415 volt 25 KA breaking cap adjustable thermal release range 250 amp – 02 Nos (ii) MCCB AC high breaking capacity 3 pole 415 volt 16 KA breaking cap adjustable thermal release range 125 amp – 04 Nos (iii) MCCB AC high breaking capacity 3 pole 415 volt 16 KA breaking cap adjustable thermal release range 63 amp – 8 Nos (iv) Three phase digital Timer switch with suitable cap of contactor controlled by existing 63 amp MCCB for street light, (v) MCB SPN 40 Amps - 6 Nos
Disconnecting, dismantling of existing LT feeder panel and supply, fabricate, install, testing and commissioning of LT feeder panel board of suitable size, out door type double door, dust and vermin proof made out of 3.15 mm thick MS sheet mounting on MS angle iron 50x50x6 MM size , height of legs as per the site requirement, suitable foundation of 150 mm thick PCC (1:3:6) type C 2 with 100 mm offsets and panel board with front and back opening and locking arrangement compete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including oriental bus bar of aluminium strip 800 amps for three phase 4 wire including the following accessories and fitted in : -
(a) Incoming: (i) MCCB high breaking capacity 4 pole 415 volt 36 KA breaking cap adjustable thermal release range 400 amp – 01 No (ii) Digital type Volt meter & amps meter with suitable capacity of CTs,LED indicator lamp and other connecting accessories (b) Outgoing: (i) MCCB AC high breaking capacity 3 pole 415 volt 25 KA breaking cap adjustable thermal release range 160 amp – 16 Nos (ii) MCCB AC high breaking capacity 3 pole 415 volt 16 KA breaking cap adjustable thermal release range 63 amp – 2 Nos (iii) Three phase digital Timer switch with suitable cap of contactor controlled by existing 63 amp MCCB for street light, – 1 No (iv) MCB SPN 40 Amps - 6 Nos
Disconnecting, dismantling of existing LT feeder panel and supply, fabricate, install, testing and commissioning of LT feeder panel board of suitable size, out door type double door, dust and vermin proof made out of 3.15 mm thick MS sheet mounting on MS angle iron 50x50x6 MM size , height of legs as per the site requirement, suitable foundation of 150 mm thick PCC (1:3:6) type C 2 with 100 mm offsets and panel board with front and back opening and locking arrangement compete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including oriental bus bar of aluminium strip 800 amps for three phase 4 wire including the following accessories and fitted in
(a) Incoming: (i) MCCB high breaking capacity 4 pole 415 volt 36 KA breaking cap adjustable thermal release range 400 amp – 01 No (ii) Digital type Volt meter & amps meter with suitable capacity of CTs,LED indicator lamp and other connecting accessories (b) Outgoing: (i) MCCB AC high breaking capacity 3 pole 415 volt 25 KA breaking cap adjustable thermal release range 160 amp – 18 Nos (ii) MCCB AC high breaking capacity 3 pole 415 volt 16 KA breaking cap adjustable thermal release range 63 amp –02 Nos (iii) Three phase digital Timer switch with suitable cap of contactor controlled by existing 63 amp MCCB for street light, – 1 No (iv) MCB SPN 40 Amps - 6 Nos
Disconnecting, dismantling of existing LT feeder panel and supply, fabricate, install, testing and commissioning of LT feeder panel board of suitable size, out door type double door, dust and vermin proof made out of 3.15 mm thick MS sheet mounting on MS angle iron 50x50x6 MM size , height of legs as per the site requirement, suitable foundation of 150 mm thick PCC (1:3:6) type C 2 with 100 mm offsets and panel board with front and back opening and locking arrangement compete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including oriental bus bar of aluminium strip 800 amps for three phase 4 wire including the following accessories and fitted in : -
(a) Incoming: (i) MCCB high breaking capacity 4 pole 415 volt 36 KA breaking cap adjustable thermal release range 400 amp – 01 No (ii) Digital type Volt meter & amps meter with suitable capacity of CTs,LED indicator lamp and other connecting accessories (b) Outgoing: (i) MCCB AC high breaking capacity 3 pole 415 volt 16 KA breaking cap adjustable thermal release range 100 amp – 10 Nos (ii) MCCB AC high breaking capacity 3 pole 415 volt 16 KA breaking cap adjustable thermal release range 63 amp –06 Nos (iii) Three phase digital Timer switch with suitable cap of contactor controlled by existing 63 amp MCCB for street light, – 1 No (iv) MCB SPN 40 Amps - 6 Nos
Disconnecting, dismantling of existing LT feeder panel and supply, fabricate, install, testing and commissioning of LT feeder panel board of suitable size, out door type double door, dust and vermin proof made out of 3.15 mm thick MS sheet mounting on MS angle iron 50x50x6 MM size , height of legs as per the site requirement, suitable foundation of 150 mm thick PCC (1:3:6) type C 2 with 100 mm offsets and panel board with front and back opening and locking arrangement compete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including oriental bus bar of aluminium strip 800 amps for three phase 4 wire including the following accessories and fitted in : -
(a) Incoming: (i) MCCB high breaking capacity 4 pole 415 volt 36 KA breaking cap adjustable thermal release range 400 amp – 01 No (ii) Digital type Volt meter & amps meter with suitable capacity of CTs,LED indicator lamp and other connecting accessories (b) Outgoing: (i) MCCB AC high breaking capacity 3 pole 415 volt 25 KA breaking cap adjustable thermal release range 160 amp – 14 Nos (ii) MCCB AC high breaking capacity 3 pole 415 volt 16 KA breaking cap adjustable thermal release range 63 amp –02 Nos (iii) Three phase digital Timer switch with suitable cap of contactor controlled by existing 63 amp MCCB for street light, – 1 No (iv) MCB SPN 40 Amps - 6 Nos
Disconnecting, dismantling of existing LT feeder panel and supply, fabricate, install, testing and commissioning of LT feeder panel board of suitable size, out door type double door, dust and vermin proof made out of 3.15 mm thick MS sheet mounting on MS angle iron 50x50x6 MM size , height of legs as per the site requirement, suitable foundation of 150 mm thick PCC (1:3:6) type C 2 with 100 mm offsets and panel board with front and back opening and locking arrangement compete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including oriental bus bar of aluminium strip 800 amps for three phase 4 wire including the following accessories and fitted in : -
(a) Incoming: (i) MCCB high breaking capacity 4 pole 415 volt 36 KA breaking cap adjustable thermal release range 400 amp – 01 No (ii) Digital type Volt meter & amps meter with suitable capacity of CTs,LED indicator lamp and other connecting accessories (b) Outgoing: (i) MCCB AC high breaking capacity 3 pole 415 volt 16 KA breaking cap adjustable thermal release range 125 amp – 10 Nos (ii) MCCB AC high breaking capacity 3 pole 415 volt 10 KA breaking cap adjustable thermal release range 63 amp –02 Nos (iii) Three phase digital Timer switch with suitable cap of contactor controlled by existing 63 amp MCCB for street light, – 1 No (iv) MCB SPN 40 Amps - 6 Nos
Disconnecting, dismantling of existing LT feeder panel and supply, fabricate, install, testing and commissioning of LT feeder panel board of suitable size, out door type double door, dust and vermin proof made out of 3.15 mm thick MS sheet mounting on MS angle iron 50x50x6 MM size , height of legs as per the site requirement, suitable foundation of 150 mm thick PCC (1:3:6) type C 2 with 100 mm offsets and panel board with front and back opening and locking arrangement compete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including oriental bus bar of aluminium strip 800 amps for three phase 4 wire including the following accessories and fitted in : -
(a) Incoming: (i) MCCB high breaking capacity 4 pole 415 volt 36 KA breaking cap adjustable thermal release range 400 amp – 01 No (ii) Digital type Volt meter & amps meter with suitable capacity of CTs,LED indicator lamp and other connecting accessories (b) Outgoing: (i) MCCB AC high breaking capacity 3 pole 415 volt 25 KA breaking cap adjustable thermal release range 160 amp – 12 Nos (ii) MCCB AC high breaking capacity 3 pole 415 volt 10 KA breaking cap adjustable thermal release range 63 amp –02 Nos (iii) Three phase digital Timer switch with suitable cap of contactor controlled by existing 63 amp MCCB for street light, – 1 No (iv) MCB SPN 40 Amps - 6 Nos
Disconnecting, dismantling of existing LT feeder panel and supply, fabricate, install, testing and commissioning of LT feeder panel board of suitable size, out door type double door, dust and vermin proof made out of 3.15 mm thick MS sheet mounting on MS angle iron 50x50x6 MM size , height of legs as per the site requirement, suitable foundation of 150 mm thick PCC (1:3:6) type C 2 with 100 mm offsets and panel board with front and back opening and locking arrangement compete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including oriental bus bar of aluminium strip 800 amps for three phase 4 wire including the following accessories and fitted in : -
(a) Incoming: (i) MCCB high breaking capacity 4 pole 415 volt 36 KA breaking cap adjustable thermal release range 315 amp – 01 No (ii) Digital type Volt meter & amps meter with suitable capacity of CTs,LED indicator lamp and other connecting accessories (b) Outgoing: (i) MCCB AC high breaking capacity 3 pole 415 volt 25 KA breaking cap adjustable thermal release range 125 amp – 03 Nos (ii) MCCB AC high breaking capacity 3 pole 415 volt 10 KA breaking cap adjustable thermal release range 63 amp –04 Nos (iii) Three phase digital Timer switch with suitable cap of contactor controlled by existing 63 amp MCCB for street light, – 1 No (iv) MCB SPN 40 Amps - 6 Nos
Disconnecting, dismantling of existing LT feeder panel and supply, fabricate, install, testing and commissioning of LT feeder panel board of suitable size, out door type double door, dust and vermin proof made out of 3.15 mm thick MS sheet mounting on MS angle iron 50x50x6 MM size , height of legs as per the site requirement, suitable foundation of 150 mm thick PCC (1:3:6) type C 2 with 100 mm offsets and panel board with front and back opening and locking arrangement compete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including oriental bus bar of aluminium strip 800 amps for three phase 4 wire including the following accessories and fitted in : -
(a) Incoming: (i) MCCB high breaking capacity 4 pole 415 volt 25 KA breaking cap adjustable thermal release range 250 amp – 01 No (ii) Digital type Volt meter & amps meter with suitable capacity of CTs,LED indicator lamp and other connecting accessories (b) Outgoing: (i) MCCB AC high breaking capacity 3 pole 415 volt 25 KA breaking cap adjustable thermal release range 100 amp – 02 Nos (ii) MCCB AC high breaking capacity 3 pole 415 volt 10 KA breaking cap adjustable thermal release range 63 amp –04 Nos (iii) Three phase digital Timer switch with suitable cap of contactor controlled by existing 63 amp MCCB for street light, – 1 No (iv) MCB SPN 40 Amps - 6 Nos
Note for tem no 1 to 9:- The rate quoted shall include the excavation for existing cable any of size removing from its loop, cleaning, cutting of old termination and reconnecting the same along with suitable new aluminium lugs, glands and refilling of cable trench complete all as all as specified directed.
Taking down of old unserviceable LT UG cable of size 3.5 core 240 sqmm & Supply and Laying LT UG cable 1100 Volts grade XLPE insulated PVC sheathed amoured, heavy duty, in trenches/walls/poles/passing through pipes with multistranded aluminium conductor including lugs/thimble/ferules connection, testing and commissioning complete of size 3.5 core 240 sqmm. Note: [i] Earth work, excavation, GI tubing/DWC pipe for protection etc shall be measured separately under relevant items of this schedule work
M&L for earthing complete with GI earth plate electrode of size 60cm x 60cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5m below the normal ground level connected with GI strip 32 x 6mm by means of bolts, nuts, check nuts & washers of galvanized iron steel including necessary excavation and earth work in any type of soil, removing surplus soil to a distance not exc 50m, with and including PCC chamber in PCC (1:2:4), type B1,using (20mm graded stone aggregate), "mild steel angle iron frame" made out of MS angle iron of size 40x 40 x 6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6mm thick CI cover with handle, watering arrangement with funnel internally secured with wire mesh with 20mm dia medium grade pipe for watering 40mm dia light grade, GI pipe for lead protection in & including alternate layers of charcoal dust and common salt complete all as shown in electrical "plate No '3' and connected to earthing test point all as specified and indicated including testing on completion including retrieving old GI earth plate, CI cover, GI pipes, angle iron frame from existing earthing complete all as specified and directed
Excavation in trench not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and for laying of LT under ground cables/GI pipes getting out as in soft /loose soil complete all as specified and directed.
Returning filling in including spreading leveling watering and well ramming in layer not exceeding 25 cm in soft/loose soil complete all as specified and directed.
Removing excavated material/soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed
supply and fix DWC high density polyethylene pipes having 100/95 mm dia with all fittings/coupler/connecting accessories confirming to IS : 16098 Part-02 for cable protection fixed on poles/walls/laid under roads crossing etc and made good the disturbed surfaces/area complete all as specified and directed
Cutting the tarmac / hard standings and excavating in trenches across the road for laying cable including making good the excavated portion by means of PCC 1:3:6, type C1 matching with the surroundings complete all as specified and directed
AGRAWAL ASSOCIATES (BID ID -3394489)
M/s Prem Associates (BID ID -3392756)
BRITE INDUSTRIES (BID ID -3395783)
DURGAI ELECTRICALS (BID ID -3395897)
NATIONAL ENGINEERING CORPORATION (BID ID -3396278)
Shree Ayyappa Engineering (BID ID -3396279)
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .