Repair/Replacement/Maintenance of street/security/perimeter/high mast lights and allied works at Mil Stn Beas and Jandiala Guru under GE Kapurthala.

Amount

Attending of day to day street/security/Gate light/Post top lantern/High mast light fixed at up to 16 mtr height (HPSV,MH,Flourescent tube light, T-5, LED , Flood light fittings etc. of any make), street light panels, rectifying defects in cable, over head conductor/jumper etc and complaints received through telephone or in person and reactification of defects installed on street light poles 9/11 mtr long, building walls, roof by bringing down the fittings on ground or in position including , cleaning of glass/acrylic cover for clear reflection of light, replacement of flexible wire to make the light fitting functional (Vehicle, ladder, tools and takes as required at site for repair/for making light fittings functional shall be provided by the contractor at his own cost and arrangement).Note : (i) Light fitting, and LED drive if required to be replaced in repair shall be measured and paid separetely under relevant item of this BOQ for supply and fixing in replacement. All consumable materials such as tape, flexible wire, nuts, bolts, washer (if found missing), in clamp for bracket, shall be deemed to be included in the quoted rate (ii) contractor will confirm availability of electrician and helper for attending and reactifying the complaints at 2 ASD Depot Area and Bde HQ Area & 415 Engr Sqn Jandiala within 6 hours on receipt of complaints. (iii) contractor manpower should be daily recieve a complaints at complaint cell at 9.00 AM by JE E/M and report after completion of complaints and handover a complaint slip as record of complaints with user signature. (II) Recovery @ 120/- per complaints is not being attended within six hours from intimation by rep of E/M subdivision through or telephonic/digital/ written complaints.

Taking down old unserviceable any type fitting and Supply and fixing LED street light fitting 35 Watt 230 V AC Raptor NEO street lights are aerodynamically designed for weather conditions with excellent thermal management made with high pressure die cast housing with toughened glass and high power LEDs with secondery optical and IP 66 protection efficiency > 110LPW 10KV SPD included ,complete all as specified.Make-Crompton /Havells/Bajaj/Philips.

Taking down old unserviceable any type fitting and Supply and fixing LED street light fitting 60 Watt 230 V AC Raptor NEO street lights are aerodynamically designed for weather conditions with excellent thermal management made with high pressure die cast housing with toughened glass and high power LEDs with secondery optical and IP 66 protection efficiency > 110LPW 10KV SPD included,complete all as specified.Make-Crompton /Havells/Bajaj/Philips.

Taking down old unserviceable any type fitting and Supply and fixing LED street light fitting 70 Watt 230 V AC Raptor NEO street lights are aerodynamically designed for weather conditions with excellent thermal management made with high pressure die cast housing with toughened glass and high power LEDs with secondery optical and IP 66 protection efficiency > 110LPW 10KV SPD included ,complete all as specified.Make-Crompton /Havells/Bajaj/Philips.

Taking down old unserviceable any type fitting and Supply and fixing Energy saving LED flood light 70 watts made up of pressure die cast aluminium housing with toughened glass and high pressure LEDs and secondery lenses with IP66 protection system complete fitting including all accessories all as specified and directed by Engineer-in-Charge. Make-Crompton /Havells/Bajaj/Philips.

Taking down old unserviceable any type fitting and Supply and fixing Energy saving LED flood light 100 watts made up of pressure die cast aluminium housing with toughened glass and high pressure LEDs and secondery lenses with IP66 protection system , efficiency > 110/125LPW 10KV SPD Ccomplete fitting including all accessories all as specified and directed by Engineer-in-Charge. Make-Crompton /Havells/Bajaj/Philips.

Taking down old unserviceable any type fitting and Supply and fixing Energy saving LED flood light 120 watts made up of pressure die cast aluminium housing with toughened glass and high pressure LEDs and secondery lenses with IP66 protection system , efficiency > 110LPW 10KV SPD Ccomplete fitting including all accessories all as specified and directed by Engineer-in-Charge. Make-Crompton /Havells/Bajaj/Philips.

Taking down old unserviceable any type fitting and Supply and fixing Energy saving LED flood light 170 watts made up of pressure die cast aluminium housing with toughened glass and high pressure LEDs and secondery lenses with IP66 protection system, efficiency > 110LPW 10KV SPD Ccomplete fitting including all accessories all as specified and directed by Engineer-in-Charge. Make-Crompton /Havells/Bajaj/Philips.

Taking down old unserviceable any type of post top lantern fitting and supply and fixing decorative LED post top lantern 20 watt powder coated aluminium die cast and spun aluminium body with clear/opel diffuser suitable for Landscape lighting available in 5700K CCT IP65 input voltage from 120-270 V power factor above 0.95 complete fitting including all accessories all as specified and directed by Engineer-in-Charge. Make-Crompton /Havells/Bajaj/Philips.

Taking down old unsv garden light and supply and fixing LED decorative Bollard garden lights suitable for 10 Watt IP65 10 watt in inverted pyramid tropod type LED Bollard with soft 360 light, resistant to corrosion with better optic for uniform distribution complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and as directed by Engr-in-Charge. Make : Havells/ Philips/Bajaj

Taking down old unsv PCC pole from site and Supply and fix steel tubular swaged poles type 410SP-31 (9.0 meter long) complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified and directed by Engr-in-charge. Make : Mahindra/Tata/Bansal

Supply and install hot dip galvanized steel (IS5986 Gr. FGe 510) Octagonal pole model NJOP 7 of 7.0 mtr long, top dia 70 mm & bottom dia 130 mm having thickness 3 mm having door operating of size 500 mm above ground level with CI Base plate of size 220x12mm having PCD 200 mm, foundation J bolts 700mm nuts and screws, No's of bolts 4x20 and having hot dip galvanized double plain arm bracket 1000 mm long overhang on one side with 48.3 mm outer dia pipe of thickness 3.2 mm fixed on top with bolts and necessary earthwork, RCC/PCC work above and below ground level for the foundation of pole including necessary formwork and fair finish to exposed surfaces without using extra cement etc complete all as specified and directed by Engr-in-Charge. Make : BAJAJ/CROMPTON/HAVELLS

Supply & Fix junction box factory made weather proof size 250mmx200mmx100mm made of 16 gauge steel sheet powder coated inculded 25mmx6mm aluminium TPN bus bars & 02 MCB 25 Amps for controlled two No's of LED Lights complete all as specifed & directred Engr-in-Charge.

Material & labour for PCC work (1:4:8) type D-2 using 40 mm graded stone aggregate in foundation of electric pole, etc including necessary form work and fare finish to exposed surfaces without using extra cement etc Complete all as specified Engr-in-Charge.

All as per description of seiral item No 14 here-in-before but PCC (1:2:4) type B-1 using 20 mm graded stone aggregates as in coping of poles complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement 1100 volt grade heavy duty cable 3 core 1.50 Sqmm PVC insulated copper stranded conductor passing through in 20 mm PVC pipe of cable size size 1.50 Sqmm for connection pupose of street light fitting from DB to street light fitting, Rate of PVC pipe shall be included in quoted rate by contractor complete all as specified and directed by the Engr-in-Charge.

Supplying, laying, jointing and testing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 16 Sqmm 4 core laid in trences, in floor, in duct, through pipes or along the pole including taking down old one complete all as specified and directed by Engr-in-Charge. Make : Havells, Polycab, KEI,Finolex

All As per item No 17 but cross sectional area 16 Sqmm 2 core.

All As per item No 17 but cross sectional area 10 Sqmm 2 core.

Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for foundation of poles/ stays/ laying of cables etc and getting out including trimming of sides of trenches complete all as specified and directed complete all as specified and directed by Engr-in-charge.

Returning, filling the soft / loose soil including spreading, leveling watering and well ramming in layers not exceeding 25 cms thick each layer complete all as specified and directed by Engr-in-charge.

Removing of surplus excavated soil to a distance not exceeding 50 mtr away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engr-in-charge.

Material and labour for sand cushioning to under ground cable with a layer of sand 8 cm thick before laying of cable and 15 cm thick after laying of cable complete all as specified and directed by Engr-in-charge.

Material and labour for brick protection using old size sub class ‘B’ bricks, laid flat, dry adjacent to each other laid length wise perpendicular to the axis of cable complete all as specified and directed by Engr-in-charge.

Supply & fixing GI pipe light grade 50 mm bore for cable protection fixed to pole/along wall/floor/under road etc complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted surface of Steel tubler Street light poles and applying two coats of synthetic Aluminium paint from top to botom including Light breakets complete all as specified and as directed.

Labour only for cutting/pruning of tree branches 1.5 mtr all around the LT overhead lines of span n.exc 70 mtr and around the pole obstruction the overhead line & removing the branches to distance n.exc 50 mtr to be the entire satisfaction of Engineer-in-charge.

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed by Engr-in-charge.

Supply and fix in replacement of Time light distribution board analog Time switch 230 volt three phase of 16 Amps rating with contactor fixed inside steel enclosure box and fixed to pole/LT Panel including clamps, nuts, bolts and washers etc complete all as specified and directed by Engr-in-charge. Make Indo-Asian cat part No TL016ABO or equivalent in Legrand/Scheneider

S & F in replacment MCCB 250 Amp, 4 pole, 36 KA 415 Volt 50 Hz with adjustable thermal release and adjustable magnetic setting complete all as specified and directed by Engr-in-charge. Make : Legrand/ Havell's/ Siemen's/ Schnieder)

S & F in replacment MCCB 200 Amp, 4 pole, 36 KA 415 Volt 50 Hz with adjustable thermal release and adjustable magnetic setting complete all as specified and directed by Engr-in-charge. Make : Legrand/ Havell's/ Siemen's/ Schnieder)

S & F in replacment MCCB 160 Amp, 4 pole, 36 KA 415 Volt 50 Hz with adjustable thermal release and adjustable magnetic setting complete all as specified and directed by Engr-in-charge. Make : Legrand/ Havell's/ Siemen's/ Schnieder)

ARR CONSTRUCTIONS

DUGGAL CONSTRUCTION CO