Shifting of Electrical Utilities of 11 KV Line, 0.4 KV O.H. Line and Distribution T/F at Kanpur Panki Nahar from Brij Mohan Hospital under EUDD- Ratanpur Kesco., Kanpur.

Supply of Earth Rod Complete

Supply of Earth wire 7/16 SWG

Supply of Stay Rod Complete 20 mm

Supply of Stay wire 7/10 SWG

Supply of M.S. Channel 100x50x6 mm 2.4 Mtr. long

Supply of M.S. Angle 65x65x6 mm.

Supply of 11 KV Pin Insulator.

Supply of 11 KV Pin with Nut.

Supply of ACSR Dog Conductor.

Supply of Al. Lug 240 sq.mm.

Supply of 11 KV Disc Insulator B & S type 70 KN.

Supply of 11 KV Disc Fitting for Dog Conductor.

Supply of G.I. Pipe 6" dia 3 Mtr. long Pcs. with M.S. Clamps.

Supply of M.S. Clamp 4½" (50x6) mm.

Supply of M.S. Clamp 5½" (50x6) mm.

Supply of Bracing Clamp 5½".

Supply of Bracing Clamp 6½".

Supply of C.I. Packing Pcs. 5½".

Supply of Stay Clamp 6½" (50x6) mm.

Supply of Stay Insulator.

Supply of Danger Board.

Supply of Barbed Wire.

Supply of Nut & Bolts 5 suit 3 inch.

Loading, carriage and unloading of all items like Cable, Pole and all related accessories from Kesco store to work site or vice-versa.

Supply and laying of HDPE 150 mm pipe with depth of 1.2 to 2.0 Mtr. as per site condition through Horizontall drilling Method at road crossing for laying of cable.

Laying of 11 KV Cable via above laid HDPE pipe through HDD method. Contractor shall also provide excel Sheet (Hard and Soft Copy) indication respective depth and distance from adjacent landmark for each segment.

Digging of pit 2 mtr.x2 mtr. for laying of cable HDD method.

Laying of 11 KV Cable through HDD method.

Digging of trench 0.3 Mtr. wide for laying of cable.

Laying of cable in above digged trench covering with bricks and cement as per standard specification and upto Pole.

Making of 11 KV I/C and O/D Cable box.

Mounting of 11 KV I/D and O/D Cable box.

Digging of suitable pit and making St. Th. Joint Box.

Providing and Fixing of concrete Stone Route marker of 300 mm width x 150 mm thick x 650 mm height in embedded in earth at least 300 mm below and 350 mm above ground level at the distance of approx 100 Mtr along the length of the cable with RCC concreting as per standard specification. Route marker should be with name of company, distance from marker to cable and cable depth with feeder name marked with Arrow sign.

Erection of Stud pole by digging of Pit.

Erection of Double pole by digging of Pit.

Erection of Tri Pole by digging of Pit.

Grouting of S.T. Pole including cost of Civil material as per standard Specification.

Making of Pole plinth including cost of Civil Material.

Erection of Earth Rod complete.

Painting of S.T. Pole including cost of paint.

Fixing of M.S. Channel on newly erected D/pole.

Erection of bracing Set.

Making Section Point in existing 11 KV O.H.

Mounting of Pin Insulator on erected pole.

Chopping of Tree Branches

Dismentalling of S.T. Pole.

Dismentalling of old cable

Dismentalling of 11 KV V type Cross Arm.

Dismentalling of Angle Iron Bracket.

Opening of 11 KV H.T. Jumper for construction of line.

Making of 11 Kv H.T. Jumper after construction of Line.

Painting and fixing of stay rod including cost of civil material.

Erection and fixing of route of the cable in each double pole.

Erection of Danger Board including related work.

Fabrication/Modification of different M.S. Itme as per site requirement.

Connecting of Newly constructed HT 11 KV network with different 11 KV existing/Newly Erected site network including testing, commissioning and energisation of the same completely.

Preparation and submission of layout drawing as per actual cable routing, showing road crossing HDPE pipe/M.S. Pipe sleeving jointing locations, markers etc.

Ali and Sons Construction

Khan Traders and Electrical Works