Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹41.9 LAccepted-AOC NO 6 BAJANAI KOIL CROSS STREET CHATHIRAM PATTABIRAM CHENNAI 600 072 | CHENNAI | CHENNAI | TAMIL NADU | 600072 | 1 | Accepted-AOC BEING LOWEST TENDERER AND FULFILLING ALL THE REQUISITE CRITERIA | |
| 2 | 2₹46.7 L+₹4.8 L (11.5%)Rejected-Finance | 2 | Rejected-Finance NOT BEING LOWEST TENDERER | |
| 3 | 3₹50.0 L+₹8.1 L (19.3%)Rejected-Finance NO 3 JAMI JAM KHAN ROAD 1ST LANE ROYAPETTAH CHENNAI 600 014 | CHENNAI | CHENNAI | TAMIL NADU | 600014 | 3 | Rejected-Finance NOT BEING LOWEST TENDERER | |
| 4 | 4₹55.7 L+₹13.8 L (33.0%)Rejected-Finance | 4 | Rejected-Finance NOT BEING LOWEST TENDERER |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
7 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Chennai
GE Chennai Fort Saint George Chennai
IMPROVEMENT OF FRONT FACADE OF HQ DAKSHIN BHARATH AREA UNDER GE CHENNAI
2024_MES_648278_1
8731
Open Tender
Civil Works
Item Rate
183 days
chennai
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE Chennai
₹86,000
Yes
20 Sept 2024
28 Mar 2024
14 May 2024
28 Mar 2024
7 May 2024
18 Apr 2024
Amount
Taking down cement plaster on brick work , concrete or stone walls etc including racking out of joint , hacking for key scrubbing down with water etc complete all as specified and directed.
M & L for Brickwork with fly ash bricks ,straight or curved in any radius in half brick thick walls built in cement mortar 1: 4 complete all as specified and directed.
M & L for Brickwork with fly ash bricks , straight or curved on plan exc 6m mean radius built in CM 1:3 complete all as specified and directed.
Cutting chases, pinning through brick wall in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.
M&L for fixing 25-35mm thick Red Sand stone elements in cladding/ veneering of approved size and shape fixed on columns ,walls ,facia,chajjas etc as per the approved design and as shown on drawings over cement plaster 15mm thick in CM 1:2 laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab along with provision of necessary scaffolding and supports up to a height of 11.00 mtrs including necessary fasteners and Stain less steel supports / steel clamps complete etc all as specified and directed. (Ref notes below)
M&L for fixing 40-50mm thick Red Sand stone elements in decorative facia/ cladding/ veneering/ drops as in corner moulds of approved size, design and shape fixed on columns ,walls ,facia,chajjas etc as per the approved design and as shown on drawings over cement plaster 20mm thick in CM 1:2 laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab along with provision of necessary scaffolding and supports up to a height of 11.00 mtrs including necessary fasteners and stainless steel supports /stainless steel clamps complete etc all as specified and directed. Measurement to be done as length x width of the complete rectangular piece of stone out of which, the arch decorative shape has been carved out using CNC machine. (Ref notes below)
M&L for fixing Red Sand stone kalash (finial) as per the approved design and as shown on drawings on the roof parapet including preparation and strengthening of the parapet base by constructing fly ash brick masonry in CM 1: 3 including rendering in CM 1: 3 ,10 mm thick to receive the load of kalash including removal and refixing of lightening arresters and external light fittings including fitting and fixtures complete all as specified and directed. Brick masonry will be measured and paid separately) (Ref notes below)
Notes for Item Nos 5,6 & 7: 1.Red sandstone sourced from anyone single quarries situated at Dholpur, Bharatpur or Malujiwala as approved by GE. 2. The colour shall be rich red/ deep maroon/ bright vermilions as approved by GE. 3. Colour shall be uniform across the tiles and shall not be varied/mixed. 4. The texture shall be fine grained and smooth finished. 5. Before procurement of bulk quantity, the sample stones shall be tested at Govt approved lab and shall confirm to the following criteria:- a) Density- 2400 kg/cum b) Water absorption shall not be more than 1.20% c) Compressive strength - 460 kg/cum d) Ferrous oxide content - not more than 0.84% e) Wear resistance not more than 2 mm on average and not more than 2.5 mm for any individual slab when tested as per IS 1706:1972. 6. All incidental charges towards procurement of stones from Rajasthan and shipping to site at Chennai such as royalty, excise, octroi, GST etc., shall be borne by the contractor and the rate quoted is deemed to include for the same.
Notes for Item Nos 5,6 & 7 Contd/- 7. Laying and fixing shall be as per 6.20.5 of SSR Part I. Typical fixing arrangement as shown in fig 18 & 19 in section 06 of SSR Part-I shall be followed using non corrosive dash fastener with washer and SS/Gun metal cramps all as directed by Engineer-in-Charge. 8. Before fixing, the existing wall/concrete surface shall be roughened to receive mortar. Slight grooves shall be made to back side of red sand stone slabs in contact with mortar to improve cohesiveness as required and as directed. 9. Stone slabs shall be cut to size as required using diamond saws as directed. 10. The finish of entire stone cladding/veneering work shall be achieved as shown in concept drawing enclosed herewith. The dimensions of corner moulding 1 side/2side/4 side shall be all as shown on above concept drawing.
M&L for rendering 15mm thick on fair faces of brick work in two layers, first layer 10mm thick in CM 1:6 and second finishing coat 5mm thick in CM 1:4 mixed with water proofing compound as per manufacturers instructions and finished even and fair on external surfaces complete all as specified and directed..
Supply only liquid water proofing compound
Demolition of Stone slabs and tiles of laid bedded and pointed in cement mortar or in any description or thickness in floors, platforms, aprons etc. complete all as specified and directed.
M & L for plain cement concrete in roof kerbs or mud stops, rounded or chamfered on edges as roof padding ,filling of gap between sand stone cladding and wall /pillars type B0, 1:2:4 (12.5mm graded aggregate)complete all as specified and directed.
Removal of existing SS Letters fixed over concrete surfaces and polishing of required and refixng back after stone cladding / veneering work in stone surfaces of any description and height of letters exc 60cm but not exc 90 cm at a height of 10.50 to 11.50 mtrs from ground level including all necessary fixing arrangements all as specified and directed
S&F PVC (SWR) pipes 110mm single socketed , in any length with rubber ring joints ,fixed to walls /floor complete including dismantling existing pipes of any description all as specified and directed.
S&F (SWR) Bends of any radius of 110 mm bore of pipe complete all as specified and directed.
Cleaning and preparation of wall /RCC slab surfaces including taking down existing water proofing treatment of any description in patches and applying the water proofing treatment as under. (a) Applying 1st course of bituminous (oil based) primer confirming to IS-3384 @ 0.4 lit/sqm over the screed bed. (b) Applying 2nd course of a coat of binding material with blown type bitumen of grade 85/25 heating to working temperature of 180°C and applied @ 1.2 kg/sqm. (c) Applying 3rd course of APP (Atactic polypropylene) based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3 mm thick reinforced with polyester non wove fabric (wt not less than 150 gms/sqm) laid with 75 mm side overlap and 100 mm overlap by forced / torch application as per manufactures instructions. (d) Applying 4th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180 degree C and applied @ 1.2 kg/sqm over APP membrane, (e) Applying 5th course of a one coat of solar reflective aluminium paint @ 0.10 Litre/Sqm on wall surfaces complete all as specified and directed.
Material and labour for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surfaces complete including preparation of newly plastered surfaces of walls all as specified and as directed by the Engineer-in-Charge. Make : APEX of Asian or equivalent of shalimar / Nerolac/ Berger.
Material and labour for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surfaces complete including preparation of old plastered surfaces of walls all as specified and as directed by the Engineer-in-Charge. Make : APEX of Asian or equivalent of shalimar / Nerolac/ Berger.
Kaadosh Real Estates Pvt Ltd
G.L.THIRUMALAI NAIDU AND COMPANY
SRI VISHAKHA ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .