PROVN OF STREET LIGHT ALONGWITH POLE AND ALLIED WORKS AT WESTEND ROAD OFFICER COLONY, GAHARY CHOWK TO PRC FATAK, STP PRC TO GOLF GROUND, GOLF GROUND MAIN GATE TO NO-02, PUPSA OFFR MESS TO IDAS FLATS, KULWANT STADIUM TO IDAS FLATS ETC UNDER GE(U) MEER

Amount

Supply, laying, jointing, testing and commissioning LT underground cables, 1100 volts grade, XLPE insulated and PVC sheathed, heavy duty armoured, with multistranded aluminium conductors, IS-7098 (marked, laid in trenches / ducts / fixed on poles / walls / laid under roads / paths / drain / culverts or encased in GI pipe complete all as specified and directed for the following sizes:- (Note;- Rate quoted includes terminal Lugs / road cutting/ wall cutting/ floor cutting/ Inter locking floor and making good damged portion matching with existing surface with all existing finishes.)

16 Sqmm 4 core

25 Sqmm 4core

35 Sqmm 3.5 core

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in Soft/Loose soil including trimming sides and bottom of trenches complete all as specified and directed.

Returning, filling-in, including spreading, watering and well ramming in layers not exceeding 25 cm thick each, in soft /loose soil complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Material and labour for river washed and screened, dry sand for filling in trenches below and around underground cables for cushioning of cables complete all as specified and directed.

M & L for Bricks for protection cover to under ground cable (with standard size fly ash bricks) with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent brick not exceeding 10mm as directed.

Material and labour for cable throwing pipe of approx. 1.5 mtr length bent to shape (30cm bend approx 120 degree angle ) and fixed to pole with FI 40mm x 6mm clamps, 01 nos and suitable size necessary nuts & bolts including throwing Lt cable complete set painting of two coat red oxide and aluminium painted fittings complete all as specified and directed Engr in Charge

M&L for galvanised steel water tubing 50 mm bore , light grade, IS-1239 marked with all fittings (IS marked) and laid in trenches / under roads / in drains / fixed to poles/walls ( with required size flat iron clamp bolts, nuts and washers ) complete all as specified and directed.

M&L for auguring of hole suitable for passing 40mm to 100mm bore pipe in true horizontal position under road, PCC paths etc., by means of mechanical ring/ auger after doing ultrasound to prevent any damage to existing cables pipe line specified and directed coming in the route not exceeding 1.5 m in depth below existing surface level of road and not exceeding 30M in length complete all as specified and directed Engr in Charge Note: Pipe shall be measured and paid separately under appropriate items and any damage to existing cables of anytype shall be made good by the bidder without any extra cost to department.

Supplying, transporting to site, erecting, and fixing in position, steel tubular swaged and welded poles of Overall height 9 metres, type 410 SP-31, IS-2713 marked, with mild steel base plate (fillet welded to poles), pole cap / finial taper plug, bolts, nuts, washers etc, including painting on the outside with two coats of aluminium paint over a coat of red oxide primer on exposed surfaces and black bituminous paint on steel surface embeded in concrete and painting 05 nos band /strips with fluorescent , Black/ Red/ White/ Green and Black using synthetic enamel paint ( 30 cm wide each) at a distance of 30 cm from plinth block and numbering of poles, complete incl Excavation , PCC (1:4:8)type D2 with 40 mm graded stone aggregate in foundation (below pole ) , cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate for foundation of pole (around the poles in pit) PCC (1:3:6) type C-1 using 20mm graded stone aggregate for coping / pedestal of poles including necessary form work, fair finishing to exposed surfaces using extra cement (around the poles in pit)complete all as specified and directed by Engr-in-Charge. (Note:- Poles shall be swaged and welded at manufacturer’s factory and not at site. The inner surface shall be factory painted)

Supply and fixing LED street light fitting 90 Watt 230 V , 50Hz AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket , with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection , Surge protection @4Kv internal 8kv external to driver with superier finish with top maintanable driver compartment complete all as specified and directed.

Supply and fixing of mounting bracket made of 40 mm bore (or higher size to suit the opening of fitting) light grade GI pipe of approx 1.5 mtr length bent to shape and fixed to pole with FI 40mm x 6mm clamps, 2 nos and suitable size necessary nuts & bolts ,including bracket complete set painting with two coats of aluminium paint over one coat of Red Oxide primer complete all as specified and directed.

S&F pole mounting type junction box factory made of size 300x200x100mm of FRP sheet duly powder coated with front openable hinged door , locking arrangements, with 4 Nos aluminium bus bars 40 Amps rating mounted on porcelain insulator, cable glands and lugs consisting DIN type rails for fixing MCB SPN 6/10 Amps, 10 kA suitable for domestic loading , -01 no. including mild steel flat iron clamp made out of 40x4mm FI, nuts, bolts and washers duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F for one runs of three core 2.5 Sqmm x 3 core (nominal area) PVC insulated and PVC sheathed multi stranded unarmed copper conductor cable LT 1100 volt grade Confirming to IS : 7098 drawn through GI pipe for connecting to street light and pole JBs and one run of PVC insulated and complete all as specified and directed.

Supplying and fixing in repair automatic operation street light timing switch having lighting control (ON-OFF) through Astronomical Calculation of Sun rise/ sun set by setting date, time and degree of longitude and latitude without separate light sensors and prewired with suitable size of copper conductor single core PVC insulated and sheathed cable and all mechanism fitted into panel, outdoor type , pole mounted with FI 25x4mm clamps , nuts, bolts and washers duly painted, connecting and testing factory made , epoxy powder coated, three Phase street light panel, digital 24 hrs, suitable for12 KW (max) complete with 63 Amps TP Contactor, and 63 Amps TPN MCBs and fixed on pole/ wall/ feeder pillar complete all as specified and directed.

D S Enterprises (BID ID -3108085)

SIYA ASSOCIATES (BID ID -3107936)

KUKREJA BROTHERS (BID ID -3119936)

janta tradrers (BID ID -3106783)

Shikha Enterprises (BID ID -3120380)

M/S JPS Electrical Engineer & Contractor (BID ID -3100436)