Construction of Anganwadi Building at Ayilam H/O Ayilam panchayat in Arcot Block, Ranipet District..

Amount

Arcot Block

Construction of Anganwadi Building at Ayilam H/O Ayilam panchayat in Arcot Block, Ranipet District

Earth work excavation for foundation in all classes of soils and sub soil to full depth except in hard rock requiring blasting but inclusive of shoring strutting if required for the sides of foundation.

Collection and supply of Gritty gravel from approved quarry inclunding cost and charges etc

Cement Concrete 1:4:8 mix using 40mm metal including cost and conveyanceof all materials to work site and all labour charges etc.

Brick work in C.M 1:5 mix using country bricks incuding cost and conveyance and all labour charges etc.

Up to Basement

Above Basement

Reinforced cement concrete 1:1.5:3 mix using 21mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete (sunshade)

Column Below

Column Above

Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc.

Below GL

Above GL

Supply and fabrication of steel including cost and conveyance and all labour charges etc. complete.

Plastering with cement mortar 1:5, 12mm thick including cost and conveyance and all labour charges etc.

Ceiling Plastering with cement mortar 1:3 mix to 10 mm thick for R.C.C. Items including cost and conveyance of all materials to site and all labour charges etc complete

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine cost etc

Providing granolithic floor finish Cement Concrete 1:2:4 mix using 10-12mm metal including cost and conveyanceof all materials to work site and all labour charges etc.

Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three M.Sand)

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with

Paving the Floor with scratch proof ceromic tiles of size 305x305x6mm laid in CM 1;2,10mm thick and pointing with white cement 0.40kg per sqm mixed with colouring pigment to siut the colour of the tiles including cost and conveyance of all materials to site and all labour charges etc complete

Dadooing the sides of the wall up to the required height and approved quality colour printed Glazed tiles of size 305 x 200 x 3 mmand set in CM 1 : 2,10mm thick and pointing with same colour cement of 4kg including cost and conveyance of all materials and

Towards the cost of steel door of size 0.90mx2.40 m including all charges etc.

Towards the cost of steel door of size 0.75mx1.50 m including all charges etc.

Towards the cost of steel door of size 1.10mx2.40 m including all charges etc.

Towards the cost of steel ventilator of size 0.9x0.45 m including all charges etc.

Towards the cost of steel Window of size 1.20x1.30m including all charges etc.

Towards the cost and fixing of RCC Jolly of size 0.90x0.45m including all charges etc.

Painting two coat with approved quality of oil bound distemper with colour over one coat of white cement for primier coat for the base including preparing surface and all materials cost labour etc

Painting two coat with ready mixed plastic emulsion of first quality paint and of approved colour over a priming coat including thorogh scarpping clean removal of dirt etc complete.

Painting two coats using Ist quality readymix enamel paint of approved colour including cost and conveyance and all labour charges etc.

Electrification

LIGHT POINT SD 20

FAN POINT SD 20

Plug point (SD38)

TNEB Board

Ceiling Fan

4'40 w flu fitting single box

32amps DP switch

G I Pipe (SD69)

7/20 GI bearer Wire

Bulk head fitting (SD83)

EB deposit

Water Supply Arrangement

1000 lit tank

Cost & Supply For Baby W.C including cost and conveyance of all materials to work site and labor charges etc complete.

Cost & Supply For E W.C including cost and conveyance of all materials to work site and labor charges etc complete.

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pilla

Cost & Supply of Cudappah Slab including cost and conveyance of all materials to work site and labor charges etc complete.

Providing and fixing PVC Rain water down fall pipes of 100mm dia with necessary shoes bends and other specials clamps screws nails teakwood plugs etc

GST Amount for providing service to Government contract works for the above construction works. { GST amount is the Total GST amount for total overall quoted amount above this row in column "BB" for all works in this package}

Dhandayuthabani (BID ID -1474185)