REPAIR/MAINTENANCE TO FLOORING ANTI TERMITE TREATMENT JOINERIES PLUMBING AND SANITARY FITTING AT OFFRS MD ACCN IN VIP AREA UNDER GE (EAST) MATHURA

Amount

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

M&L for Vitrified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but nexc 1.00sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement mortar 1:3 complete all as specified and as directed.

All as per Serial item No 2.00 here-in-before but as in skirting/dado laid over and including 10mm thick rendering in cement mortar 1:3 complete as specified and as directed.

M&L for Non Skid ceramic joint free coloured tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1 : 4 complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface of size 600x300x7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick rendering in cement motar 1:3 complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (Below or above ground level) including removal of debris outside of MOD land complete all as specified and as directed.

M&L for 75 mm thick cement concrete 1:4:8 type D2 (using 40 mm graded aggregate) as in sub floors, sub bases, floors and paving etc. complete all as specified and as directed.

M&L for chequred cement concrete tiles 30cm x 30cm x 25mm thick, with white cement and pigments, set jointed and pointed in neat cement slurry in floor laid over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for Non skid ceramic ENDURA coloured tiles 10mm thick (square /rectanguler) area each tile exc 0.06 Sqm but n. exc 0.11 Sqm in floor set and jointed in neat cement slurry & pointed with coloured cement to match laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for anti termite treatment of soil under existing floors using chemical chlorophyriphos emulsifiable concentrate 20EC conforming to IS:8944 or IS 632, emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete as specified and as directed.

Dismantling boarding of kitchen cabinets/cupboards any thickness complete all as specified and as directed .

S&F 18 mm thick hybrid wood polymer composite board (WPC) for kitchen cabinet/cupboard cabinet shutter, one side decorative laminated and other side white balancing having density 600 Kg/cm, fixed with ncessary stainless steel driling screw/anchoring bolt etc complete all as specified and as directed. Note : Design and colour of board shall be approved by GE.

S&F 18 mm thick hybrid wood polymer composite board (WPC) in cupboard shutter/kitchen cabinet with both side balancing white, fixed with necessary stainless steel drilling screws/anchoring bolt etc complete all as specified and as directed.

S&F 12 mm thick hybrid wood polymer composite board (WPC) in cupboard shutter/kitchen cabinet, one side decorative laminated and other side white balancing, fixed with necessary stainles steel drilling screws/anchoring bolt etc complete all as specified and as directed. Note : Design and colour of board shall be approved by GE.

S&F stainless steel 304 grade kitchen modular basket for storage of plates cups, grains basket, glass cutlery, bottle etc of required size, as approved by GE complete all as specified and as directed. Make : Godrej/Hindware/Lifetime

S&F Ball bearing runners 45 mm size Telescopic full extension load capacity 50 kgs, of stainless steel grade SS-304 complete all as specified and as directed.

S&F Magnetic catcher (KTS-20) full extension load capacity 8 kgs complete all as specified and directed.

S&F stainless steel handles 100mm size for kitchen cabinet, cupboard shutters as approved by GE complete all as specified and as directed.

S&F Stainless steel (SS-203) Hasp and staple 100mm, safety type aluminium anodised with Stainless steel hinge pin including bolt to hinge plate and fixed with SS screws complete all as specified and as directed.

S&F Continuous (piano) hinges width of flaps 40 mm (when opened) mild steel, bright finish or electrogalvanised complete all as specified and directed.

Taking up or down 15 mm bore dia steel tubing and connections, including cleaning for refixing or removed from site complete all as specified and as directed.

S&F steel tubing, galvanised, medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed.

M&L for Cutting chases pinning in, making good to facing where reqd. and pointing in cement mortar 1:3 to ends or edges of landing ,steps, cills, sunshades,selfs lintels etc. and cutting chases brick walls for concealed water tubing or concealed conduite wiring etc and making good, cutting n.exc 10cm girth complete all as specified & as directed.

Taking up or down 20 mm bore steel tubing and connections including cleaning for refixing or removed from site complete all as specified and as directed.

S&F steel tubing ,galvanised, medium grade 20 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed.

S&F in repair rotational moulded triple layer pllyethylene water storage tank (Cylindrical vertical with closed top) white in colour 1000 Ltr capacity having monkey protection cover hoisted and fixed in position complete all as specified and as directed.

All as per item serial No 26.00 here in before but 500 Ltr capacity water storage tank complete all as specified and as directed.

S&F vitreous china wash hand basin,white, flat back size 545x400 mm including 32 mm bore etc CP brass waste coupling and waste pipe and brackets complete all as specified and as directed.

S&F in repair single lever WHB mixer 15mm bore cast copper alloy chromium plated for 450mm braided connection pipe without pop up complete all as specified and as directed. Make : Jaquar Cat Part No KUP-CHR-35011BPM/ Kohler Cat Part No: K-33063IN-4ND-CP/ Cera Part No: F1021451

S&F in repair pillar tap cast copper alloy chromium plated, fancy type with capstan heads,screwed down high pressure, with or without lettered Hot or Cold with long screwed shank and fly -nuts, screwed for iron pipe 15 mm bore dia complete all as specified and as directed.

S&F in repair cast copper alloy chromium plated fancy type stop valve/angular cock with wall flange screwed down, screwed both ends for 15 mm bore dia iron pipe complete all as specified as directed. Make : Jaquar :- Cat Part No : KUP-CHR-350553PM /Cera :-Cat Part No : F-1003201/Kohler :- Cat Part No : K-80154IN-4AV-CP

S&F in repair bib taps long body cast copper alloy chromium plated, fency type with crutch or butterfly handle, screwed down screwed for 15mm bore dia iron pipe complete all as specified and as directed. Make : Jaquar :- Cat Part No : KUP-CHR-35037 /Cera :-Cat Part No : F-1003151/Kohler :- Cat Part No : K-16093IN-4-CP

S&F in repairs wall mixer head and hand arangment combination pattern including telephone hand shower, flexible tube and work connecting legs wall flanges etc complete all as specified and as directed. Make : Jaquar :- Cat Part No : LYR-38145 /Cera :-Cat Part No : F-1003403/Kohler :- Cat Part No : K-98754IN-4-CP

S&F in repairs cast copper alloy chromium plated over head shower (300x300mm) square shape with 600mm long arm complete all as specified and as directed. Make : Jaquar :- Cat Part No : OHS-CHR-1639 /Cera :-Cat Part No : F-7010109SS/Kohler :- Cat Part No : K-73038IN-CL-CP

S&F in repairs cast copper alloy chromium plated concealed stop cock reduced body with adjustable wall Flange for 15mm bore dia iron pipe complete all as specified and as directed.

S&F in repair cast copper alloy chromium plated Two way Angle cock for 15 mm bore dia iron pipe with wall flange complete all as specified and as directed.

S&f in repair cast copper alloy chromium plated two way bib cock with wall flange fixed to 15 mm bore dia iron pipe complete all as specified and as directed. Make : Jaquar :- Cat Part No : KUP-CHR-35041PM /Cera :-Cat Part No : F-1003161/Kohler :- Cat Part No : K-16094IN-CP

S&f in repair Soap dish, of CP brass body and rectangular in shap fixed to plugs with chromium plated brass screws complete all as specified and as directed. Make : Jaquar Cat Part No AKP-CHR-35731P/Cera Cat Part No :F-5012116CH/Kohler Cat Part No K-25069IN-CP

S&f in repair cast copper alloy chromium plated towel rack 600mm long with lower hangers complete all as specified and as directed. Make : Jaquar Cat Part No CPA-CHR-1181FH/Cera Cat Part No : F-5012101CH/Kphler Cat Part No K-25066IN-CP

S&F in repairs Stainless steel sink with draining board made out of 1.0 mm thick steel sheet for kitchen with plug washers and waste pipe, Brass waste coupling including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe. Overall size 915mmx460mm bowl size 410x330x160mm complete as specified and as directed.

S&F in repairs sink mixer with EXTENDED swinging spout 450mm long (wall mounted model) with connecting legs and wall flanges for 15mm bore dia iron pipe complete as specified and as directed. Make : Jaquar Cat Part No FLR-CHR-5309N/Cera Cat Part No : F-100351/Kohler Cat Part No K-37315 IN-4-CP

S&F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed.

S&F in repair stainless steel Hand jet health faucet 15 mm bore with CP flexible tube 1.20m long with all connected fittings complete all as specified and as directed. Make : Jaquar :- Cat Part No : ALD-CHR-565GA /Cera :-Cat Part No : F-8030116AB/Kohler :- Cat Part No : K-12927N-CP

S&F in repair stainless steel, toilet paper holder box type fixed to walls with cromium plated (CP) brass screws complete all as specified and as directed. Make : Jaquar Cat Part No AKP-CHR-35753PS/Cera Cat Part No : F-5007110/Kohler Cat Part No K-5633IN-CP.

S&F in repairs bathroom cabinet of size 450mmx350mm with mirror and PVC shelves complete all as specified and as directed.

S&F in repair corner glass shelf with stainless steel bracket fixed to wall complete all as specified and as directed. Make : Jaquar Cat Part No CAN-CHR-1173/ Cera Cat Part No : F-5005102/ Parryware Cat Part No : T-6010A1.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S&F in repairs sheet glass assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with stainless steel bracket guard and railing 60 cm long complete all as specified and directed.

S&F stainless steel tubular Towel Rail Chromium plated 20mm dia D type 60 cm long complete all as specified and directed. Make : Jaquar :- Cat Part No CPA-CHR-1111/ Cera :- Cat Part No : F-5013104CH/ Perryware :- Cat Part No : K-25065IN-CP

S&F in repair stainless steel waste coupling for 32mm bore discharge pipe for WHB/Sink etc. complete as specified and as directed.

S&F in repairs PVC flexible waste pipe 32 mm dia for WHB complete all as specified and as directed.

S&F in repairs PVC flexible waste pipe 40mm dia for kitchen sink complete all as specified and as directed.

S&F in repair Brass chromium plated Bottle trap for 32mm bore dia discharge pipe having min. water seal of 25mm omplete all as specified and as directed.

S&F stainless steel Grating doom 100 mm dia with or without hole complete all as specified and as directed.

S&F in repairs 20mm bore GI Nipple suitable for HDPE water tank minimum weight 20mm-45gms complete all as specified and as directed.

S&F in repair Ball valve brass high pressure with polythene float and fly nuts complete screwed for 20 mm bore dia iron pipes or brass ferrule complete all as specified and as directed.

S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes 20 mm bore dia complete all as specified and as directed.

M&L for Cleaning of HDPE tank of capacity up to & including 1000 litres by Flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 metre and depositing where directed complete all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area not exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n exc 4.00 Sqm each complete all as specified and as directed.

Taking down Shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and as directed.

S&F Pressed steel chowkats or frames of size 105x60 mm made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified and as directed.

M&L for Pressed steel chowkats or frames of size125x60mm (made out of 1.25 steel sheet) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-0 (using 12.5 mm graded stone aggregate) as in filling of steel frame and hold fast complete all as specified and as directed.

S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and as directed.

S&F factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick one side prelam colour PVC sheet reinforced with M.S. square tube and edges will be painted to match the prelam sheet complete all as specified and as directed.

S&F 28-30mm thick factory made solid PVC moulded door shutter with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2 mm thick PVC plain colour sheet on back face complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts 250 mm long of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and as directed.

S&F Extruded Aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and as directed.

S&F 100mm long stainless steel (SS-203) butt hinges medium weight, cold rolled, complete all as specifed and directed.

S&F Aluminium powder coated three track sliding windows with three sliding shutters (one with stainless steel jalli and two with glass panes) aluminum sections not less thatn 1.10kg per meter for bottom and top tracks and side track 0.98 kg per meter, bottom shutter frame 0.55 kg per meter, top shutter frame 0.47 nylon beading, channel, gasket, roller Matruti lock with handles etc including coast of 5mm thick tinted sheet glass and stainless steel wire mesh with 0.36mm nominal dia of wire and 1.18mm aperture complete all as specifed and directed.

Anodised aluminium grill (anodised transparent or dyed to required shade according to IS :1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handlles and fixing approved anodised aluminium standard section around the opening all complete as per requirement and direction of Engineer-in-charge

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete as specified and as directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F floor door stopper of aluminium anodised body and tengue, anodised with hard drwan steel spring overall length of cover plate 140 mm complete all as specfied and as directed.

S&F in repair EWC 705x370x770mm with S trap 300mm combination pattern including cistern and other connected accessories and fixed on floor complete all as specfied and as directed.

S&F in repairs vitreous china wash down water closet pedestal pan white, plastic water closet seat, closed pattern with recessed bottom, and seat cover and mild steel cromium plated or aluminium hinging devices complete all as specified and as directed.

S&F in repairs aluminium (extruded section body) Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S&F 4mm thick, Sheet glass ordinary quality and glazing with oil putty/steel / aluminium beading etc in square n exc 0.5 sqm in each pane complete all as specified and as directed.

M&L for prepration of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamal paint over and including a coat of red oxide primer complete as specified and as directed.

S&F in repair 25 mm dia stainless steel tubular drapery rod cut to size and fixed in position including fixing brackets, stop, roller, end caps etc complete all as specified and as directed.

S&F in repair plate rack made of stainless steel sheet 1mm thick for kitchen overall size 900mm x 750mm x 255 mm complete all as specified and as directed.

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for Brick work using old size burnt clay sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

All as per serial items No 90.00 here-in-before but except bricks (using brick obtained from item No 89 here-in-before) complete all as specified and as directed.

M&L for removing mortar from old size sub class bricks obtained from demolition built in cement mortar and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish compelete all as specified and as directed.

M&L for rendering 10mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even & smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brickwork or concrete surfaces finished even and fair, complete all as specified and as directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint over and including a coat of alkali resistant primer complete all as specified and as directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges, hips, valleys etc complete all as specified and as directed.

S&F 6mm thick asbestos cement, corugated or semi-corrugated sheets fixed with L-type or J-type or cranked hook bolts in roofs, wall etc complete all as specified and as directed.

S&F for abestos cement one piece plain angular ridge 6mm thick fixed with L-type or J-type or cranked hook bolts in roofs, wall etc complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet (AZ-150) 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet (AZ-150) 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges/valley gutters, fixed with self tapping screws complete all as specified and as directed.

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed .

M&L for providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint for all hights complete all as specified and as directed.

M&L for 4 mm thick designer non-asbestos fiber cement building board having fire resistance & moisuture resistance & moisture resistance property fixed on metal grid frame work complete all as specified and as directed.

S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet including 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame for fixing PVC sheets inclusive of solvent cement complete all as specified and as directed.

Dismantling timber scantlings (framed work) exc 40 Sq cm in section in any position complete all as specified and as directed.

M&L for Mild steel work in Trusses, Rafter, Purlins, Wind Ties and Vertical post of Angle, Channel, Tee, Hollow Section, Flat etc including special shaped washer, angle cleats, fish plates, gusset plates, base/ bearing plates, bolts and nuts etc. complete using ERW or induction butt welded tubes conforming to 1161-1979 grade st 240 complete all as specified and as directed.

M&L for Anti termite treatment, treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area using chemical chlorophyriphos emulsifiable concentrate 20EC conforming to IS:8944 or IS 632 complete all as specified and as directed.

M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical chlorophyriphos emulsifiable concentrate 20EC conforming to IS:8944 or IS 632, emulsion at the rate of 7.5 litres per sqm of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and as directed.

M/S OM Enterprises (BID ID -3200070)

B S ENTERPRISES (BID ID -3196958)