REPAIRS TO ROOF FLOORING JOINERY SANITARY FITTINGS PLASTERING SUNKEN FLOOR ANTI TERMITE TREATMENT AND MISC WORKS AT 16TS LOGISTIS SIGNAL SECTION 2 AFDC BAKERY SNCOs MESS MI ROOM SHOPING COMPLEX OFFRS ACCN AT GANGAMMA CIRCLE IN THE AREA OF A

Amount

Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames) and all as specified and directed.

All as per item 1 above but exceeding 1.5Sqm but not exceeding 4 Sqm each

Taking down shutters of any description exceeding 1Sqm and not exceeding 2 Sqm each.

Supply and fixing second class hardwood for Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, and all as specified and directed.

Supply and fixing 30mm thick factory made Flush shutter,solid core construction,with block board core and plywood face panels with commercial type on both sides complete all as specified and directed.

Supply and fixing 35mm thick second class hard wood framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated and all as specified and directed

Supply and fixing 35mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats and all as specified and directed.

Supply and fixing Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying & fixing in opening as per specification & drawing.

Supply and fixing Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with wood free EPS with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

Supply and fixing 300 mm Al alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed.

Supply and fixing 150mm Al anodised, barrel tower bolts of extruded section complete all as specified and directed.

All as per item No 11 here in before but 100mm

Supply and fixing Extruded Aluminium alloy handles, fabricated type, anodised 150mm

All as per item No 13 here in before but 100mm

Supply and fixing 100 mm long Stainless steel Butt hinges extruded.

Supply and fixing 125 mm long medium weight MS Butt hinges extruded.

Material and labour PCC 1:2:4, type B0 (using 12.5 mm thk graded stone aggregate) as in bed plates, coping, levelling concrete, laid to slope including necessary formwork etc all as specified and directed.

Material and labour for preparation of new wooden surfaces of any description and applying two coats of synthetic enamel paint over a coat of pink wood primer and all as specified and directed.

Supply and fixing stainless steel wire cloth of 0.36mm dia of wire and average width of aperture 1.40mm with staples or serviceable fillets complete as directed by EIC

Supply and fixing in repair stainless steel wire cloth of 0.36mm dia of wire and average width of aperture 1.40mm with staples or old serviceable fillets complete as directed by EIC

Dismantling of MS work of any description not otherwise described.

Supply and fixing steel ventilators with top hung shutter including hinges, steel pegs, stay etc complete all as specified and directed.

Supply and fixing Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded and all as specified and directed.

Supply and fixing Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded and all as specified and directed.

Supply and fixing 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and all as specified and directed.

Supply and fixing 3mm thick frosted glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and all as specified and directed.

Material and labour preparation on new steel surfaces of any description exc10cm width or girth including preparation and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

Hacking out old broken glass panes from metal frame including punching and drilling out and galzing pins/spring clip and S/F sheet glass ordinary quality 3 mm thick, in squares n.exc. 0.50 Sqm in each pane including necessary new oil putty or with existing metal beadings complete.

Hacking out old broken glass panes from metal frame including punching and drilling out and galzing pins/spring clip and s, S/F Figured glass 3mm thick pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane and securing with new oil putty and providing and fixing new metal beadings complete.

Supply and fix 5 mm thick plain glass pane to the existing aluminium window/ door of any size including necessary rubber gasket and aluminium clips etc complete including taking down old broken glass pane complete including taking down old one and all as specifeid and directed.

Demolition of cement Concrete (un reinforced) of any description and in any position not otherwise specifically provided for

Dismantling of floor, hearth or wall tilling incl cement mortar bedding (but not backing) and removing rubbish off from premises.

Material and labour for 15 mm thick screed bed in cement mortar 1:4 for laying floor finishes under floor and all as specified and directed.

Material and labour for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as in backing coat to receive wall tiles etc.

Material and labour for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and all as specified and directed.

All as per item No 35 hereinbefore but in skirting including necessary cutting of tiles.

Material and labour for 10mm thick coloured vitrified tiles (Square/rectangular ) polished ,area of each tiles not exce 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

All as per item No 37 hereinbefore but in skirting including necessary cutting of tiles.

Material and labour for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and all as specified and directed.

Material and labour for ceramic coloured tiles of size 300x200mmx7 to 8 mm thick, on verticals surfaces, set and jointed inneat cement slurry and pointed in coloured / white cement to match the tiles and all as specified and directed.

Material and labour for 25 mm thick PCC (1:2:4 ) type B1 using 20 mm graded stone agg as in sub base of floor and complete all as specified and directed.

Material and labour for Glass dividing strips 3mm thick, 38mm wide and inserted in position to conform to design complete all as specified and directed.

Material and labour for 40mm thk PCC 1:2:4 type B-1 using 20mm graded agg as in flooring finished even and smooth without using extra cement

Material and labour for cement concrete 1:3:6 type C-2, 75 mm thick using 20mm graded stone aggregates as in plinth protection finished fair and even with out using extra cement all as specified and directed.

Taking down rough dressed stone laid in plinth protection/drain walls and removing mortar from and cleaning stones; stacking for measurement including all extra handling and removal and disposing off rubbish

Material and labour for 75 mm thick rough dressed stone slab flooring bedded, jointed and pointed in cement mortar 1:3 and all as specified and directed.

All as per item No 46 here in before but except stone slab.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid bedded and pointed in any mortar and all as specified and directed.

Material and labour for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and mirror polishing complete in window cill, cooking platform and over 15mm thick rendering in CM (1:4) complete all as specified and as directed.

Demolition of brick work / PCC Block / stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches etc complete

Material and labour pre-cast PCC 1:3:6 type C1 (20 mm graded agg) cement concrete block masonry with solid blocks exc. 10cm in width and set in cement mortar 1:6 .

All as per ser No 51 here-in-before but except block

Material and labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Racking out joints / points in cement mortar to squared rubber masonry coursed or uncoursed

Material and labour for Keyed pointing in CM 1:4 to random or polygonal rubble, uncoursed or brought upto courss and all as specified and directed.

Taking down cement plaster of any description incl raking out joints, haking for key scrubbing down with water etc complete

Material and labour for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement and all as specified and directed.

Material and labour for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as internal surfaces of walls.

Material and labour for distempering walls with two coats of washable distemper oil emulsion on new surfaes over a coat of alkali resistant priming paint (white or tinted) as directed of distempered and painted surfaces as in preparatory work to give uniform and smooth finish all as specified.

Material and labour for two coats of cement based paint over a coat of primer on newly plastered surfaces of wall including necessary preparation and all as specified and directed.

Material and labour for 2mm thick wall putty on walls including complete removal of existing removal of existing any type of treatment.

Material and labour for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence slats, treading oil, greasy spots etc and applying one coat of white wash and all as specified and directed.

Material and labour for preparation of old surfaces of ceiling including scrapping down, smoke soot, efflorescence slats, treading oil, greasy spots etc and applying one coat of white wash and all as specified and directed.

Material and labour applying one coat of oil emulsion distemper over old decorated wall surfaces of any description including necessary preparation, cleaning, scrapping down smoke soot, efflorescence salts, trading oil, greasy spots etc and all as directed by Engg in Charge. (Make : Shalimar Shaktiman, Berger wall masta, & Asian Paints)or equvalaint approved make)

Material and labour applying one coat of oil emulsion distemper over old decorated ceiling surfaces of any description including necessary preparation, cleaning, scrapping down smoke soot, efflorescence salts, trading oil, greasy spots etc and all as directed by Engg in Charge.(Make :Shalimar Shaktiman, Berger wall masta, & Asian Paints)or equvalaint approved make)

Material and labour for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence slats, treading oil, greasy spots etc and applying one coat of cement based emulsion and all as specified and directed. (Make : Shalimar Shaktiman, Berger wall masta, & Asian Paints)or equvalaint approved make)

Material and labour for preperation of old painted surfaces of steel and iron work of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint any tint complete all as specified and directed.

Material and labour for preperation of old painted surfaces of wood of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint any tint complete all as specified and directed.

Material and labour for servicing /easing steel windows shutters of size not exceeding 2 Sqm each including cleaning scrapping hacking oiling replacing welding broken hinges making good disturbed portion painting all as specified as directed by Engr-in –charge

Taking down Aluminium door / window shutter with frame and all as specified and directed.

Supply and fixing anodised aluminium powder coated frame or grills as per pattern approved by GE for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc powder coating minimum thickness of powder coating 50 micron complete with sliding channel etc all as specified. frame on compression as per Aluminium section 100x45x2.5mm thick)

Supply and fixing anodised aluminium powder coated side hung / sliding door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door hinges, anodised aluminium snap beading screws etc complete all as specified with powder coating of any colour.

Supply and fixing anodised aluminium powder coated sliding window and ventilator frame with shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door hinges, anodised aluminium snap beading screws etc complete all as specified.

Supply and fixing brass mortise lock (6 levers), vertical type, size 100mm long complete all as specified and directed .

Supply and fixing in repairs brass mortise lock (6 levers), vertical type, size 100mm long complete all as specified and directed .

Supply and fixing in repair door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutter complete all as specified and directed .

Supply and fixing in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Taking down defective aluminium door with glass panes and repairing floor stopper, bearing alignment etc. including replacement of any item required for proper functioning and refixing in the same position.

Stripping off tarfelt from old roof surfaces complete all as specified and as directed.

Material and labour for rendering 20mm thick in CM 1:3 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Providing and applying single component acrylic polymer modified, fibre reinforced waterproof coating Brushbond Roof Guard in 3 coats of application @ 0.5 litre/m2/coat, The Product should have following Properties: Solid Content : 70 % Tensile strength (ASTM D 412) : 1.10 MPa Elongation (ASTM D12): 100 % Resistance to ageing due to UV radiation: 1000 hours No change Rapid Chloride Penetration : Very low Resistance to Algae growth: Passes, Zero Rating/ Permeability (mm) : 5.0 Water vapour transmission: 6.0 g/ m² h No. of coats : 3 (minimum) Adhesive bond strength : > 0.92 N/mm2 Make : FOSROC

Material and labour for applying oil bound primer @ 0.20 Kg / sqm and providing APP modified water proofing membrane weighing not less than 4 Kg / Sqm reinforced with min 160 gm / Sqm non woven polyster mat and a coat of hot blown bitumen of 90/15 @ 1.20 Kg/ Sqm applied on the top of polymeric membrane and finally finished with a coat of solar reflective bituminous aluminium paint @ 100gms / sqm for roof treatment and all as specified and directed.

Material and labour for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces

Material and labour for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application for sunken floor complete all as specified

Material and labour Plain cement concrete 1:5:10 type E2 using 40mm graded stone aggregate as in sunken floors and all as specified and directed.

Material and labour for rendering 15mm thick in CM 1:3 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Supply only liquid water proofing compound

Taking out steel water tubing and connections including cleaning for refixing 15 mm dia.

All as per item No 88 hereinbefore but 20mm dia.

Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and fixing of 20mm outer dia Female Brass Threaded Adaptor (FTA/ FBTACPVC complete all as specified.

Supplying fixing of 25mm outer dia CPVC union complete all as specified.

Supplying and fixing of 20mm outer dia CPVC brass elbow and all as specified.

Supply and fixing 15 mm dia galvanised steel water tubing medium grade to walls and ceiling or lying in floors.

All as per item No 95 hereinbefore but 20mm dia.

Cutting chases, pinning in. brick work / stone concrete surfaces and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth and all as specified and directed.

Supply and fixing in repairs 15 mm dia stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of following sizes

Supply and fixing in repair angular stop valve 15 mm chromium plated concealed, fancy type screwed down high pressure screwed both ends for iron pipe for 15 mm bore.

Supply and fixing in repairs Bib taps fancy type chronium plated with crutch or butterfly handle screwed down screwed for galvanised iron pipe or for brass ferrule and fixed complete for 15 mm bore

Supply and fixing in repairs pillar tap with capstan heads chronium palted screwed down high pressure with or without letter 'Hot' or 'Cold' with long screwed shanks and flynuts screwed for galvanised iron pipe and fixed complete for 15 mm bore

Supply and fixing in repairs for CP brass health faucet alongwith flexible pipe and stay complete all as specified and directed.

Supply and fixing in repairs coloured PVC toilet cabinet of size 355x455x90mm with looking mirror in replacement of existing looking mirror/woodencabninet and repairing the disturbed surfaces to match with existing.

Supply and fixing in repairs viterous china wash down water close (Pedestral pattern) EWC white incl plastic water closet seat cover and mild steels chromium plated on aluminium hinging device and connecting to 'P' or 'S' incl connecting flush pipe with flushing rim all as specified

Supply and fixing in repair viterous china squatting pan 'Orissa pattern ' size 580 x 440mm white with integral foot rests incl connecting to 'P' or 'S' trap and to flush pipe antisyphonage pipe etc compete including provn of lime concerte bedding and making good to floor all as specified

Supply and fixing in repairs PVC low level flushing cistern 10 Lit capacity including necessary brackets incl connecting flush pipe etc and making good the disturbed surfaces all as directed

Supply and fixing in repairs viterous china wash basin white flat back size 550 x 400 mm including brackets, waste coupling etc all as specified and directed

Supply and fixing in repairs wall mixture incl three joints to steel pipes of 15 mm bore and plugging & screwing to walls and making good the disturbed surfaces of walls to match with existing surfaces all as directed Make: Jaquar

Supply and fixing in repairs PVC flexiable pipe (Connecter) 15 mm dia, 450 mm long with check nut and bolt with washer all as specified

Supply and fixing in repairs PVC waste pipe 32mm bore for WHB & Sink

Supply and fixing of in repairs plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

Dismantling of cast iron/RCC/PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings.

Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls bore of pipe 75 mm with PVC clamps and saddles including taking down existing pipes.

All as per item No 114 above but bore of pipe 110 mm

Supply and fixing PVC (SWR) bends of any radius with access door bore of pipe 75 mm

All as per item No. 116 above but bore of pipe 110 mm with access door

Supply and fixing PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 75 mm

All as per item No . 118 above but bore of pipe 110 mm

Supply and fixing 125/ 110 mm bore PVC (SWR) gully/floor trap plain with grating incl jointing with solvent cement

Material and labour for post construction Anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes of 12mm dia etc. in apron and all as specified and directed

Material and labour for post construction Anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors and all as specified and directed

Material and labour for post construction Anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same and all as specified and directed

Dismantling boarding, any description, fixed in any position with nails

Material and labour for 12mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work and all as specified and directed.

Supply and fixing 18/19 mm thick Block boards, grade 2 quality interior grade commercial type, fixed withscrews to timber frame work and all as specified and directed.

M &L for 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions

Supply and fixing 30 mm width of flap Continous (Piano) hinges, mild steel, bright finish or electrogalvanised.

Supply and fixing 40mm dia, brass cupboard knobs fixed with nut, screw and washer

Supply and fixing 140mm ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in and fixed

Supply and fixing brass Drawer handles, projection drop (50mm to 65mm) on screwed plate 80 to 100mm long and all as specified and directed.

Supply and fixing in repairs floor door stopper 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor and all as specified and directed.

Supply and fixing in repairs MS chromium plated 25mm dia heavy duty curtain rods and all as specified and directed.

Supply and fixing stainless steel fancy type curtain brackets and all as specified and directed.

Supply and fixing stainless steel, holding clips for curtain rod and all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, incl nainital or similar pattern roof covering and all as specified and directed.

Dismantling of MS work of any description not otherwise described.

Supply and fixing framed work as in doors or gates of angle or other section with gusset plates, rails, braces,guard bar etc., complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410 -W (Gde- E- 250) quality-A complete

Supply and fixing steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to grade IS 1161-1979

Material and labour for 0.50mm thick Pre painted Galvalum aluminium zinc coating GI based corrugated steel sheet AZ 150 of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed with self tapping screws as specified.

Material and labour for 0.50mm thick Pre painted Galvalum aluminium zinc coating GI based plain steel sheet AZ 150 of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed with self tapping screws as specified.

Supply and fixing in repairs Bib tap standard of PTMT of fancy type of any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms

Supply and fixing in repair tubular towel rail brass chromium plated 20 mm dia 'D' type 60 cm long between flanges

Supply and fixing in repair grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms).

Supply and fixing 125mm bore brass CP grating of approved design fixed with white cement complete as directed including taking down old one.

Supply and fixing in repair shower rose chromium plated 120 mm with or without swirel joints including fixing to steel pipe of 15 mm bore

Material and labour for grinding and polishing of terrazzo floor with machine including wax polishing all as specified and directed by EIC.

All as per item No.147 above but in skirting/dado (grinding/ polishing by hand)

Material and labour for cleaning the existing tiles joints and filling the tiles hollow joints with white cement including grouting of floor trap surroundings with white cement to the entire satisfaction of the Engr-in-charge.

Material and labour for cleaning steel windows wire mesh shutters with soap water of size not exceeding 1.5 Sqm each including cleaning scrapping all as specified as directed by Engr-in –charge

Supply and fixing in repair large spindle for tap all as specified and as directed.

Supply and fixing in repair medium spindle for tap all as specified and as directed.

Supply and fixing in repair small spindle for tap all as specified and as directed.

Supply and fixing in repairs Stainless steel Plate rack of 1mm thick and sizze of 900mm x 600 mm x 200mm deep with plate racks, spoon holders, shelves etc complete

Supply and fixing in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including taking out old steel sink and fittings with cement beadings and demilition of supports etc and making good the destrubed surfaces all as directed.

Supply and fixing in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm and fittings with cement beadings and demilition of supports etc and making good the destrubed surfaces all as directed.

Resecuring or easing and adjusting wooden shutters of any description area n.exc. 1 Sqm each without taking down

Resecuring or easing and adjusting wooden shutters of any description exc. 1 Sqm but n.exc. 2 Sqm each without taking down

SHREE BANASHANKARI ASSOCIATES

Sri Lakshmi Venkateswara Enterprises

Kaveri Enterprise

JITHU CONSTRUCTION COMPANY