IMPROVEMENT TO SHOPPING COMPLEX AND IMPROVEMENT OF ANTE ROOM AND BAR ROOM AT OFFRS MESS AND CERTAIN MINOR WORKS AT AF STN BIHTA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified.

Dismantling of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M&L premium quality Coloured, glazed vitrified tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles, laid over and including 15 mm screed bed in Cement mortar 1:6, complete all as specified and directed. Note : Shade, colour and design shall be approved by GE

M&L premium quality Coloured, glazed vitrified tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on walls/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade, complete all as specified and directed. Note : Shade, colour and design shall be approved by GE.

M&L joint free Glazed ceramic premium quality designer coloured tiles in vertical surface such as skirting/dados etc size 300X 450X6 to 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 10 mm thick cement plaster in 1:4 CM on brick or concrete surfaces, complete all as specified and directed. Note : Shade, colour and design shall be approved by GE

M&L joint free Non - skid premium quality Coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles, laid over and including 15 mm screed bed in Cement mortar 1:6, complete all as specified and directed. Note : Shade, colour and design shall be approved by GE.

Taking up or down 15 mm bore dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15mm GI Tubes, medium grade' with all required fittings & fixed to wall & ceilings or laid in floors complete all as specified and directed.

S&F 20mm GI Tubes, medium grade with all required fittings & fixed to wall & ceilings or laid in floors, complete all as specified and directed.

Dismantling of existing cast iron soil vent pipe of 100 mm internal dia fixed to wall or laid in trenches and taking out from trenches and removal incl all fittings and accessories, complete all as specified and directed.

Dismantling of existing cast iron soil vent pipe of 75 mm internal dia fixed to wall or laid in trenches and taking out from trenches and removal incl all fittings and accessories, complete all as specified and directed.

S&F 100 mm Spun Cast iron soil, waste and vent pipes sand cast in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed.

S&F 75 mm Spun Cast iron soil, waste and vent pipes sand cast in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed.

S&F 100 mm Spun Cast iron soil, waste and vent pipes sand cast in any length with or without ears fixed with wall with cement joints, complete all as specified and directed.

S&F in 100 mm dia bore cast iron bends of any radius, diminishing pieces or tapers (larger bore measured), complete all as specified and directed.

S&F 75 mm dia bore cast iron bends of any radius diminishing pieces or tapers (larger bore measured), complete all as specified and directed.

S&F cast iron cowls of 100 mm bore pipe, complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed with wall, complete all as specified and directed.

S & F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality, complete all as specified and directed.

S&F in repairs of 75 mm Cast iron floor trap, with chromium plated grating of 75mm size including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed.

S&F in repairs 15mm bore pillar taps, cast copper alloy with capstan heads, Decorative (fancy) type, chromium plated brass, screwed down, high pressure screwed for iron pipe, complete all as specified and directed.

S/F in repair of vitreous china urinal, bowl type (flat back) of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, complete all as specified and directed.

S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including trap set in and including concrete and connection to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor, complete all as specified and directed.

S&F of vitreous china wash hand basin, counter sunk in any stone slab, white of size 500mmx400mm including waste coupling, PVC waste pipe and connection 32mm bore, complete all as specified and directed.

S&F in repair 15mm bore chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, decorative (fancy) type, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repair 15mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, fancy type, chromium plated, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F coloured toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed.

S&F Soap dish of stainless steel with approximate size 160x160x90mm fixed to plugs with chromium plated brass screws, complete all as specified and directed.

S&F in repair decorated type chrome finish ABS body health faucet with 8mm dia and 1.2m long flexible tube and wall hook, complete all as specified and directed.

S&F aluminium powder coated (minimum thickness of powder coating is 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing and grills etc, complete all as specified and directed.

S&F anodised aluminium powder coated (minimum thickness of powder coating is 50 micron) door shutters using aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed.

S&F aluminium powder coated (minimum thickness of powder coating is 50 micron) window and ventilator shutters fixed/sliding type without shash bar, using aluminium section weighing more than 1.20 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc. complete all as specified and directed.

S&F Itched glass in square exc 0.50 Sqm each pane, 5-6 mm thick fixed to aluminium section, complete all as specified and directed. Note- Design on Itched glass shall be as approved by the GE.

S&F sheet glass ordinary quality in square not exc 0.50 Sqm each pane, 4 mm thick fixed to aluminium section, complete all as specified and directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.

S&F mortice lock of brass 4 levers, vertical type, size 75 mm, complete all as specified and directed.

S&F 150 mm long aluminium, powder coated, barrel tower bolts of extruded section in door shutters only, complete all as specified and directed.

Dismantling wall/ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness incl aluminium/GI snap grid of any description, complete all as specified and directed.

S & F powder coated Galvanized iron snap grid frame work of size 605mm x 605 mm for false ceiling, complete all as specified and directed.

S&F of Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed.

S& F Gypsum board 12 mm thick in ceiling fixed with screw as per manufacturers instructions with level difference in two stages and pattern as approved by GE, complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

Rounding to edges of stone slabs, such as in steps, cooking platform, and other similar situation, complete all as specified and directed.

S&F Harrison rails, stainless steel of 25 mm dia for curtain rod fixed with two Nos of ornamental brackets for each rod, complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

Taking down of chowkat with shutter without taking off shutters from the frame exceeding 1.5sqm each but not exceeding 4 sqm, complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement, complete all as specified and directed.

M&L RCC (Nominal Mix) type B1 1:2:4 (20 mm graded aggregate) for beams, cantilevers, bressummers, lintels over 1.5 m span, complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressu-mers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc fair finished surfaces, complete all as specified and directed.

M&L TMT bar 10 mm dia and over, cut to length, bent to shape required, including crankimg, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less the 0.90 mm dia or securing with, complete all as specified and directed.

~ ditto ~ as per item No 53 above but 5 mm dia and over upto and incl 10 mm dia in stirrups.

M&L Brickwork with sub class 'B' bricks (Old size brick) straight or curved on plan exc 6 m mean radius built in CM 1:6, complete all as specified and directed.

M&L for applying 2 coats of Plastic Emulsion paint over a coat of alkali resistant primer on ceiling, complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls and applying 2 mm thick wall care putty in two different layers of opposite direction on wall for making the surface even and smooth and applying 2 coats of Plastic Emulsion paint over a coat of alkali resistant primer, complete all as specified and as directed.

M&L for complete removal of existing treatment on wall surfaces by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free form dust, loose paint etc incl applying 2 mm thick wall care putty in two different layers of opposite direction on wall for making the surface even and smooth and applying 2 coats of Plastic Emulsion paint over a coat of alkali resistant primer, complete all as specified and as directed.

Demolition of Concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground floor) and removing demolished material to a distance n.exc 100m, complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc, complete all as specified and directed.

M&L joint free non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles incl 15mm thick screed bed in cement mortar 1:6 all as specified and directed

M & L glazed ceramic coloured tiles of approved quality ISI marked (300x450x6-7mm thick) as in vertical surface such as skirting dados etc set jointed in neat cement slurry and pointed in coloured cement to match with the tiles incl 1:4 cement plaster 10mm thick on brick work and concrete surface all as specified and directed.

M&L 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in subbase of floors etc, complete all as specified and directed

Chequered cement concrete tiles 20cm x 20cm x 25mm thk, set, jointed and pointed in neat cement slurry in floors (glossy finish / rubber moulded), laid over and including screed bed 20 mm thk in CM 1:6, complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (20 mm graded stone aggregate) as in kerbs around chequered tiles and paver block and in coping, benching etc slightly rounded or chamfered angles and throating, complete all as specified and directed

Excavation in trenches n exc 1.50 m wide & n exc 1.50m deep for foundation etc or for shafts wells cesspits, manhole pier holes etc n exc 10 sqm on plan and n exc 1.5m depth and getting in soft/loose soil, complete all as specified and directed

Returning, filling in including spreading, levelling, watering and well ramming in layers n exc 25 cm for any type of soil, complete all as specified and directed

Removing excavated material (soils) n exc 50m and depositing where directed at a level n exc 1.5 m above the starting point, complete all as specified and directed

M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in bed to drain pipes, incl packing under & haunching against the sides of pipes after laying down and testing for 150 mm bore RCC Pipe, complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling, mass concrete and sub base complete all as specified and directed.

M&L for precast cement concrete cover slabs of PCC 1:2:4 Type B-1(using 20mm graded stone aggregate) set & jointed in CM 1:6, complete all as specified and directed Note- Reinforcement shall be measured & paid separately

M&L for rendering 15mm thk in CM 1:4 on fair faces of brick work or concrete surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for reinforced concrete pipes of bore dia 150mm, class NP2, laid and jointed complete with collars, complete all as specified and directed

Taking down carefully copper / aluminum point wiring (Light/Fan/Socket/power) complete including fittings and fixtures such as switches , ceiling roses , pendents , regulators , sockets , light fittings etc. and making good the disturbed surfaces of walls/ floors etc complete all as specified and as directed .

Taking down submain wiring of any size /description from wooden battens/PVC conduits from walls/floors/ceiling etc., complete and making good the disturbed area, complete all as specified and as directed.

Material and labour for point wiring, using approved colour coding (Phase-red, Neutral-black, Earth-green) complete with FRLS PVC insulated and unsheathed stranded copper conductor cable 1.5 sqmm single core conforming to IS 694 including medium duty concealed unplasticised PVC conduit conforming to IS 9537(part-3) and ISI marked not less than 20 mm dia with concealed in wall pressed steel terminal box of not less than 2 mm thick of required size including painting terminal boxes inside and outside with two coat of synthetic enamle paint over one coat of red oxide primer with top cover 3 mm thick bakelight laminated sheet with brass screws and Cup washer with all assessories including FRLS PVC insulated and unsheathed stranded copper conductor cable 1.5 sqmm single core in green colour as earth wire connected to earth dolly, complete all as specified and directed for the following: - (a) One light/fan/exhaust fan point controlled by 1 No. one way 5/6 Amp switch.

(b) One 3 pin /5 pin socket outlet 5 Amp controlled by 1 No. one way 5/6 Amp switch on same board along with other switches, fan regulator etc.

(c) One 3 pin /5 pin socket outlet 5 Amp controlled by 1 No. one way 5/6 Amp switch on independent board.

S&F switch piano flush button single pole one way 6 Amp, 240 Volts conforming to IS 3854 ISI marked, complete all as specified and directed.

S&F for socket outlet, 5 Pin, 6 Amp flush type conforming to IS 1293 ISI marked, complete all as specified and directed.

S&F ceiling rose, surface Bakelite, isolated body three terminals, complete all as specified and directed.

Material and labour for point wiring, using approved colour coding (Phase-red, Neutral-black, Earth-green) complete for one socket outlet 15 Amp on independent board with FRLS PVC insulated and unsheathed stranded copper conductor cable 2.5 sqmm single core conforming to IS 694 including medium duty concealed unplasticised PVC conduit conforming to IS 9537(part-3) and ISI marked not less than 20 mm dia with concealed in wall pressed steel terminal box of not less than 2 mm thick of required size including painting terminal boxs inside and outside with two coat of synthetic enamle paint over one coat of red oxide primer with top cover 3 mm thick bakelight laminated sheet with brass screws and Cup washer with all assessories including FRLS PVC insulated and unsheathed stranded copper conductor cable 2.5 sqmm single core in green colour as earth wire connected to earth dolly complete all as specified and directed .

S&F switch piano flush button single pole one way 15 Amp, 240 Volts conforming to IS 3854 ISI marked, complete all as specified and directed.

S&F for socket outlet, 3 Pin, 15 Amp flush type conforming to IS 1293 ISI marked, complete all as specified and as directed.

Supply and fixing LED tube lights fitting 1x 18W, 220V, including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and complete all as specified and directed.

Supply and fixing LED tube lights fitting 1x 10W, 220V, including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and complete all as specified and directed.

S&F sheet metal enclosures (MCB Distribution board) when MCB’s to be used single pole and neutral 8 ways 220 volt with 200 amps rated bus bar, double door with bus bar neutral link earth bar, Din rail, necessary blanking plated, including fixing DB flush in wall complete with making good disturbed surfaces and colour matching all as specified and directed including taking down old one.

S&F MCB’s single pole, 10 KA ,10 Amp to 32 Amp 240 Volts and of ''B'' series with required wiring connections and lugs etc and erecting in provided encloser/distribution board. MCBs shall be of current limiting type, ISI marked conforming to IS 8828-1996, including taking down old one, complete all as specified and as directed.

S&F MCB’s single pole and neutral, 10 KA, 32 Amp to 40 Amp 240 Volts and of ''B'' series with required wiring connections and lugs etc and erecting in provided encloser/distribution board. MCBs shall be of current limiting type, ISI marked conforming to IS 8828-1996, including taking down old one, complete all as specified and as directed.

S&F Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and as directed.

S & F sub main wiring using approved colour coding (Phase-red, Neutral-black, Earth-green) complete with two single core FRLS PVC insulated and unsheathed stranded copper conductor cable 6 sqmm as current carrying conductor and one run of 6.0 sqmm as neutral cable, voltage rating 1100 volt, ISI marked drawn in and including concealed PVC conduit ISI marked of dia not less than 25 mm and thickness 2 mm with stranded accessories along with one run of FRLS PVC green colour insulated, unshealthed, stranded copper conductor of size 6 sqmm, complete all as specified and directed. Note: Two run of single core FRLS PVC cable with one run of earth contunity conductor and conduit shall be measured as one unit.

Supply and Fixing for bell push flush type 5 A SP 230 V AC, complete all as specified and directed.

Supply and fixing Bell (Ding-Dong) 230 volts AC, single pole, complete all as specified and directed.

Supply only LED Bulb of 07/09 Watt, retrofit type, 220 Volts AC, complete all as specified and as directed.

Supply and fixing LED Decorative ceiling down light in white housing colour with warm white lights model No SP320PLED155-6500PSUDIA 100 WH make Philips or equivalent in other approved makes, complete all as specified and as directed.

Supply and fixing LED Decorative false ultra sleek recessed down light for low height in round profile white housing colour with warm white lights model No DN091B LED 6S - 6500 PSU WH Make Philips or equivalent in other approved makes, complete all as specified and as directed.

Supply and fixing LED Decorative false ultra sleek recessed down light for low height in round profile white housing colour with warm white lights model No DN092B LED 10S - 6500 PSU WH Make Philips or equivalent in other approved makes, complete all as specified and as directed.

Supply and fixing LED Spot light white housing colour with warm white with elegant fixed spot with a focused 36 degree beam angle lights model No 7W SKY SPOT COV (WW) Make Philips or equivalent in other approved makes, complete all as specified and as directed.

Supply and fixing LED down light green LED EYE light with 100 lumen per watt efficiency with integrated driver control Model No DN 192 LED 10S - 6500 PSU WH S2 Make Philips or equivalent in other approved makes, complete all as specified and as directed.

Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers and complete incl taking out old one, complete all as specified and directed.

Supply and fixing LED luminaries (>120 Lumen/watt) 600 mm x 600 mm, 30 watt (LCTLRNE-30-FO-CDL) suitable for 230 volts, 50 HZ AC supply recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holder and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size from ceiling rose incl taking down old one, complete all as specified and directed.

S&F switch-socket combination of capacity 05/06 Amps, 220 Volts AC, flush type, complete all as specified and directed.

S&F wall mounted fan 400 mm sweep, anti dust 3 blades, white pack, 5 star rating and connecting up including provision of cable for electric connection, complete all as specified and directed. (Make: Havells Model Platina remote 400 mm anti dust or equivalent in any other approved make).

Supply and laying well burnt old size sub class 'B' bricks as protection to underground cables, laid dry and flat perpendicular to the direction of cable adjoining each other, complete all as specified and directed.

M&L for dry and fine river sand free from sharp material as in cushioning to cable in trenches for cable protection including necessary punning and consolidation as required, complete all as specified and as directed. (Depth of sand shall be measured after punning).

Supply, Laying, jointing and testing of cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured electric power cable, heavy duty, with aluminium conductor, cross sectional area 16 Sqmm 4 core, 1100 Volts grade, complete all as specified and directed.

Supply, install, testing & commissioning out door type cubical feeder pillar panel box TPN of size 600x600x300 mm, aluminium bus bar 200 Amps, outer shell made out of 3.15 mm thick MS sheet, inner shell made out of 2.00 mm thick MS sheet and MS angle section 40x40x6 mm mounted on PCC 1:2:4 type B-1 platform 60 cm above and 30 cm below the ground level, frame factory fabricated with front and back openable single door system, complete suitable for 3 phase 4 wire 415 volts, 50 Hz with IP 54. The bus bar shall have sufficient holes for distribution of LT supply to 8 houses, single phase and making necessary distributions with the help of thimbles etc, complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised iron strip 25x4 mm as earthing lead by means of bolts, nuts, check-nuts, and washers of galvanised iron or steel including excavation and earth work, GI pipe medium grade 32 mm bore for protection of GI strip from earth electrode to test point /machinery / equipment, supplying and laying charcoal dust, common salt, PCC (1:2:4) type B1 using 20 mm graded crushed stone agregrate chamber and RCC cover 54 cmx54cm x50 mm thick (1:2:4) type B-1 using 20 mm graded crushed stone aggregates, reinforced with 8 mm dia TMT bars @ 75mm C/C both ways with mild steel handle 12 mm dia, using round bar, PGI funnel with wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No-3 of SSR part-1 and testing on completion includingd taking out the old unserviceable earthing complete all as specified and directed. Note - Cost of GI strip and GI protection pipe up to a distance 7.5 M shall be included in quated rate of above Items.Note : Rate for taking down of old unsv earthing upto ground level may also be includ in quoting rate).

S&F MCB’s triple pole & neutral, 10 KA, 16-30 Amp 415 Volts and of 'C' series with required wiring connections and lugs etc and erecting in provided enclouser/distribution board. MCBs shall be of current limiting type, ISI marked, conforming to IS 8828-1996, including taking down old one, complete all as specified and as directed.

S&F MCB’s single pole, 10 KA, 5-30 Amp 240 Volts and of 'C' series with required wiring connections and lugs etc and erecting in provided enclouser/distribution board. MCBs shall be of current limiting type, ISI marked, conforming to IS 8828-1996, including taking down old one, complete all as specified and as directed.

Supply & Fixing and connecting up complete MCB DB TPN 4 way (Vertical), double door, 415 V, AC, 50 Hz, with and including MCB 63 Amps 16 KA, IP-40 protection conforming to IS-13032 universal mounting with copper bus bar, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides, complete all as specified and directed.

MS JAGDAMBA ENTERPRISES

BRIJESH ENTERPRISES