Wheel Shop Annual Shutdown 2026, Work No. 7 (MMR).

A-C3-FRC (Rates are inclusive of GST)

1. Dismantling of 10" pitch main chain. (Total length Approx. 240 Mtrs.) 2. Replacement of complete wear plates on upper track and defective wear plates on lower track (Total length on upper & lower track Approx. 240 Mtrs.) 3. Replacement of complete square rod on upper track & defective square rods on lower tracks. (Total length on upper & lower track Approx. 240 1 Mtrs.) 4. Replacement of return track tail and drive end conveyor pieces. 5. Provision of wear plate screws (6 X 30 MM) 6. Replacement of damaged structure and supports. (Approx 3 meters length) 7. Fitment of serviced/new 10" pitch main chain. 8. Replacement/Repair of damaged riser guard in between the conveyor 9. Replacement of drive triplex/duplex chains and defective sprockets. 10. Replacement of drive belts and defective drive pulleys. 11. Replacement of escapement arm, pin, bushes, cylinder and guides. 12. Painting of entire conveyor structure with two coats of Aluminium paint. 13. Disposal of released material to earmarked place

B-D13 FRC (Rates are inclusive of GST)

1. Dismantling of 10" pitch main chain. (Approx 210 Mtrs) 2. Replacement of complete wear plates on upper track and defective wear plates on lower track.. (Total length on upper & lower track Approx. 210 Mtrs.) 3. Replacement complete square rod on upper track & defective square rods on lower tracks (Total length on upper & lower track Approx. 210 Mtrs.) 4. 1 Replacement of return track tail and drive end conveyor pieces. 5. Provision of wear plate screws (6 X 30 MM) 6. Replacement of damaged structure and supports. (Approx 2 Meters length) 7. Replacement of escapement arm, pin, bushes and guides. 8. Fitment of 10" pitch main chain. 9. Replacement of drive triplex/duplex chains and defective sprockets. 10. Replacement of drive belts and defective drive pulleys. 11. Servicing of RC Fan assembly. (Servicing includes replacement of bearings, belts, defective pulleys & dynamic balancing of impeller along with shaft) 12. Painting of entire conveyor with aluminum paint. 13. Disposal of released material to earmarked place.

C-D14 FRC (Rates are inclusive of GST)

1. Dismantling of 10" pitch main chain. (Approx 210 Mtrs) 2. Replacement of complete wear plates on upper track and defective wear plates on lower track.. (Total length on upper & lower track Approx. 210 Mtrs.) 3. Replacement complete square rod on upper track & defective square rods on lower tracks (Total length on upper & lower track Approx. 210 Mtrs.) 4. 1 Replacement of return track tail and drive end conveyor pieces. 5. Provision of wear plate screws (6 X 30 MM) 6. Replacement of damaged structure and supports. (Approx 2 Meters length) 7. Replacement of escapement arm, pin, bushes and guides. 8. Fitment of 10" pitch main chain. 9. Replacement of drive triplex/duplex chains and defective sprockets. 10. Replacement of drive belts and defective drive pulleys. 11. Servicing of RC Fan assembly. (Servicing includes replacement of bearings, belts, defective pulleys & dynamic balancing of impeller along with shaft) 12. Painting of entire conveyor with aluminum paint. 13. Disposal of released material to earmarked place.

D-C20 FRC (Rates are inclusive of GST)

1. Marking, cutting, grinding and drilling of angles and plate sections for fabrication of C-20 conveyor upper and lower tracks. (Approx length- 45mtrs) 2. Marking, cutting, grinding and drilling of angles and plate sections for fabrication of C-20 conveyor upper and lower track supports. (Approx length- 45mtrs) 3. Marking, cutting, grinding and drilling of guide roller brackets and its supports. (Approx length 40 meters) 4. Dismantling of 10" pitch main chain. (Total length Approx. 185 Mtrs.) 5. Dismantling of existing upper track, lower track & supporting structures. 6. Fabrication and fitment of upper track with 12 mm thickness bright flat, lower track with 6 mm thickness bright 1 flat, its supports and check for proper alignment. 7. Replacement of tail and drive end conveyor pieces and its supports. 8. Replacement of Escapement and its supporting structures 9. Fitment of 10" Pitch main chain. 10. Fitment of guide roller bracket assembly and check for free movement of mould boxes. 11. Replacement of drive triplex/ duplex chains and defective sprockets. 12. Replacement of drive belts and defective drive pulleys. 13. Servicing of RC Fan assembly. (Servicing includes replacement of bearings, belts, defective pulleys & dynamic balancing of impeller along with shaft). 14. Painting of entire conveyor structure with Red-oxide & apple green paint. 15. Disposal of released material to earmarked place. 16. Supervisory Charges 17. Balancing charge for R.C fan assembly of MHO

E-C21 FRC (Rates are inclusive of GST)

1. Dismantling of 10" pitch main chain. (Total length Approx. 185 Mtrs.) 2. Replacement of complete wear plates on upper track and defective wear plates on lower track (Total length on upper & lower track Approx. 185 Mtrs.) 3. Replacement complete square rod on upper track & defective square rods on lower tracks. (Total length on upper & lower track Approx. 185 Mtrs.) 4. Replacement of return track tail and drive end conveyor pieces. 5. Provision of wear plate 1 screws (6 X 30 MM) 6. Replacement of damaged structure and supports (Approx 3 meters length) 7. Fitment of serviced/new 10" pitch main chain. 8. Replacement of drive triplex/duplex chains and defective sprockets. 9. Replacement of drive belts and defective drive pulleys. 10. Replacement of escapement arm, pin, bushes, cylinder and guides. 11. Servicing of RC Fan assembly.(Servicing includes replacement of bearings, belts, defective pulleys & dynamic balancing of impeller along with shaft). 12. Painting of entire conveyor structure with two coats of Aluminium paint. 13. Disposal of released material to earmarked place.