REPAIRS TO SUNKEN FLOOR, DADO, SOIL WASTE VENT AND WATER SUPPLY PIPES, SANITARY FITTINGS, PLUMBING INCLUDING OVER HEAD CLEANING UNDER NHL AND OHL AREA AND REPAIRS TO COMPOUND WALL FENCING CULVERT AND MISC B R ITEMS UNDER ZONE B UNDER GE(EAST) MATHUR

Amount

S&F in repair, 10 liter capacity low level PVC valveless, syphonic action type flushing cistern, white, with inlet, ball valve, flush pipe, float and handle including brackets etc complete.

M&L cutting holes into or through brick wall n.exc 150cm area buit in cement mortar and making good in cement mortar 1:3 or cement concrete M-15 grade (Nominal Mix)using 20 mm grade store aggregate as required.

S&F in repairs PVC flush pipe of 32mm dia with arrangement for connectiong low level flushing cistern any type WC with all fixing arrengement.

S&F in repairs plastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hing devices complete all as specified. Make- Commander/Hindware/Parry ware.

S&F in repairs CP brass shower rose 125 mm X 100 mm size suitable for 15 mm bore pipe complete all as specified.

S&F in repair pillar tap 15mm bore cast copper alloy with capstan heads, chromium plated screwed down high pressure fancy type long screwed shank and fly nuts for iron pipe and fixed in repair all as specified.

S&F in repairs PTMT waste fitting 32 mm bore for WHB complete all as specified. Make- Prayag/Symet/Polytuf.

S&F in repairs stainless steel waste coupling 40 mm dia suitable for SS sink complete.

S&F PVC waste pipe of standered pattern, not less then 75cm long, 40mm of steel/wash hand basin etc, coupling required complete. Note:- Polyplast/symet/Prayag.

Cutting chases for conceled water tubing and making good in cm (1:3) cutting not exc 10cm girth complete.

M&L cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth of brick walls complete all as specified.

S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms). Make:- Prayag/Symet/poly past.

S&F in repairs bib taps cast copper alloy with crutch or butterfly handle screwed down for iron pipe or brass ferrule and fixed fency type chromium plated 15mm bore.

S&F in repairs stop cock cast copper alloy with crutch or butterfly handle screwed down boh ends for iron pipe or brass ferrule and fixed fency type chromium plated 15mm bore.

Hacking out old broken glass of any thickness size or quality from wooden/metal frame fixed with putty/beading & S&F 3 mm thick sheet glass, plain ordinary quality any size as required at site in each pane complete all as specified.

Taking up or down 15 mm bore of steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.

Taking up or down 20 mm bore of steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.

Taking up or down 25 mm bore of steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.

Supplying & fixing to walls and ceiling 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.

Refixing 15mm bore tubes medium grade galvanised with all new fitting and fixed to wall and ceiling or laid in floor.

Supplying & fixing to walls and ceiling 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.

Refixing 20mm bore tubes medium grade galvanised with all new fitting and fixed to wall and ceiling or laid in floor.

Supplying & fixing to walls and ceiling 25 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.

Refixing 25mm bore tubes medium grade galvanised with all new fitting and fixed to wall and ceiling or laid in floor.

S&F in repair water closet squatting pan 'Orissa Pattern'of size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe) with P' or 'S' trap complete incl connection to trap,and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed complete all as specified and directed.

S&F in repair vitreous china wash basin white, flat back size 550x400mm incl brackets incl cutting for and pinning in end of brackets or erecting stand etc.

S&F in repair 15mm size PVC connection with PTMT nut of length 600mm.

S&F in repair 15mm bore concealed fancy type chromium plated stop valves, cast copper alloy screwed down, high pressure wih crutch or butterfly handles, screwed both ends complete all as specified.

S&F in repair 20 mm bore gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe.

S&F in repairs stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire stapple etc wooden/fillets (15mm x 15mm) duly painted with synthetic enamel paint complete all as specified.

S&F in repairs towel rail 600 mm long 20 mm dia Alumunium anodised.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet shelf 12 cm wide with CP bracket guard and railling 45 cm long complete.

S&F in repairs 32mm solid Elbow complete.

S&F in repairs 32mm solid 'T complete.

S&F in repairs ISI marked MS 250 mm size ordinary rat tail rod pettern sprig for door incl rollar & rollar plsted complete. Make:- RITZ or equivallent approved make.

S&F in repair Sinks with drainage board made of stainless steel 1 mm thick Kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mmx450mm bowl size 410 mm x 330 x 160 mm.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen and laboratry with plugs, washers and waste including bedding n cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm copmlete.

S&F in repairs mild steel chromium plated grating (round) 125 mm dia fixed over floor/nahani trap complete.

S&F in repairs chromium plated brass angle valve fency type screwed both ends high pressure for 15 mm bore size iron pipe or ferrule complete.

Taking down cement plaster of any description including racking out joints, hacking for key, scrubbing down with water etc complete.

M&L for Rendering 5 mm thick in cement mortar 1:3 on ceiling surfaces & surface finished even and smooth without using extra cement.

M&L for Rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and surface finished even and smooth without using extra cement complete all as specified.

M&L rendering 15 mm thick (10mm + 5mm) plaster on other than fair face of brick work in CM 1:4 and surface finished even and fair by mixing liquid water proofing compound as per manufacturers instructions complete. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

M&L for preparing newly plaster surface of ceiling and applying three coats of white wash complete all as specified.

M&L for preparing newly plaster surface of wall and applying three coats of white wash complete all as specified.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L 40 mm wide 3 to 6 mm thick rubber beading fixed to door shutter as in repair complete.

S&F in repair fancy type stainless steel grade 304 drapray rod 25 mm dia incl side caps and brackets complete.

Supply only liquid water proofing compound hydroseal-W+ / Dr Fixit or eqivalent (for plaster hardening, to contol efflorescence & fungal growth) as approved by GE.

S&F in repairs 250mm size aluminium andised sliding door bolts with hasp, stape (bolt type) and fixing of clip and sheet cast or extruded section and fixing bolts and sliding bolts and extruded section complete all as specified.

S&F in repairs butt hinges, medium weight cold rolled mild steel of size 100mm complete.

S&F in repairs two legged aluminum floor door stopper with rubber shoe 140 mm long complete.

S&F in repairs aluminium anodised handles 'D' type of excluded section of size 150mm complete.

S&F in repairs 150mm size aluminium annodesed barre tower tower bolt of extruded section completed.

S&F in repair 110mm bore PVC (SWR) pipe type 'A' single socketed in any length with rubber ring joints fixed ot walls incl necessary clamps etc.

S&F in repair 75mm bore PVC (SWR) pipe type 'A' single socketed in any length with rubber ring joints fixed ot walls incl necessary clamps etc.

Taking down aluminium shutter of any type 'A' size and refixing after rescuring the hinges, oiling, adjusting floor spring providing packing if required completed.

Supply and fix in repair 500 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc complete.

Supply and fix in repair 1000 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc complete.

S&F in repair white colour PVC monkey protection tank cover suitable for 500/1000 litres capacity PVC water storage tanks with locking arrangement including nut and bolt complete all as spacefied and directed by Engr in charge.

Dismantaling of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles.

M&L for Brickwork with fly ash bricks old size straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified.

M&L for Glazed ceramic tiles on vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick backing coat in cement mortar 1:3 complete all as specified.

M&L Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over & including 15mm screed bedding in cement mortar 1:4 complete all as specified.

All as per above item No 66 (non skid ceramic tile) above but on vertical surfaces as in skirting over and includig 10mm thick backing coat in CM 1:4 complete all as specified.

S&F Vitrified ceramic coloured light shed tiles 10mm thick (square/ rectangular) area of each tile exc 0.18Sqm but not exceeding 0.36Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15mm thick screed bed or bedding completed all as specified.

All as per item No 68 above but on vertical surfaces as in skirting over and includig 10mm thick backing coat in CM 1:4 complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises.

M&L Hardcore of Broken stone or boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L for 50mm thick PCC M-15 grade (Nominal Mix)using 20mm graded stone aggregate as in flooring, finishing the surface even and smooth using extre cement.

Demolition of cement concrete in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed by Engineer - in - Charge.

Dismantling of 6 mm thick AC corrugated or semi-corrugated sheets in roof covering including ridges, hips, valleys and flashings etc .

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with 'J' & 'L' hoks and crancked bolts and washer complete.

All as per items No 75 but except sheets fixed with 'J' hook and cranked bolts and washer complete.

M&L for asbestos two piece ajustable serrated ridge for corrugated or semi corrugated sheet fixed with 'J' hook L cranked bolts complted.

S&F in repairs high density polythene pipe 32 mm (HDPE) of pressure @ 6 Kg/Sqcm laid in trenches/wall

Cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipe etc of capacity exc 250 ltrs and n.exc 500 ltrs.

Cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipe etc of capacity exc 500 ltrs and n.exc 1000 ltrs.

M&L for chequered tiles coloured cement concrete of size 300 x 300 x 25 mm thick polished as in floor set and jointed in neat cement slurry and pointed with colour of tiles over and including 15mm screed bed in cement mortar 1:4 complete.

Dismantling of ceiling boards of any type and any thickness including cover fillets and timber frame work complete.

Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications and as directed by Engineer-in-charge.

M&L 4mm thick designer non-asbestos fibre cement building board having fire resistance & mosture resistance properly. Make :- Everest, fixed on aluminium grid with screws complete all as specified and directed.

S&F in repair 15-20mmGI reducer complete.

S&F in repairs 25 mm bore GI Union complete.

S&F in repairs 25 mm bore GI Elbow complete.

S&F in repairs 25 mm bore GI Socket complete.

S&F in repair 20 mm bore GI Union complete.

S&F in repair 20 mm bore GI Elbow complete.

S&F in repair 20 mm bore GI socket complete.

S&F in repair 15 mm bore GI Tee complete.

S&F in repair 15 mm bore GI Union complete.

S&F in repair 15 mm bore GI Elbow complete.

S&F in repair 15 mm bore GI socket complete.

S&F in repair 15 mm bore 125 mm long Nipple

S&F in repair 15 mmbore 100 mm long Nipple

S&F in repair 15 mm bore GI Plug.

S&F in repairs GI nipple fully threaded with two numbers check nuts and washers for PVC tank, 100mm long to PVC tank with back nut and washers for inlet and outlet pipe of following sizes :

15mm bore

20mm bore

25mm bore

M&L for prelaminated partical board 18mm thick, interior grade, prelaminated one side balancing white lamination in pelmet box, cub board etc rebaed or flae edges fixed with in repairs complete.

M&L for 6mm thick teak wood lipping suitable for 18mm thick block board or vaneered/pre laminated partical board, fixed with nails, in repairs completed.

S&F in repairs 15 mm dia CP brass health faucet shower for EWC with 1.5m CP flexible pipe

S&F in repairs PVC Jet for EWC completed all as directed

Labour only for Re-securing or easing and adjusting without taking down door shutter of any descrription and size.

Labour only for Re-securing or easing and adjusting without taking down window shutter of any descrription and size.

Taking down door shutter of any description & size and refixing in the same opening after necessary repair required for smooth functioning

Taking down widow shutter of any description & size and refixing in the same opening after necessary repair required for smooth functioning

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

M&L for preparation of new steel or iron surfaces of any description exc. 10cm width or girth and applying two coat of Synthetic enamel paint over a coat of red oxide, primer complete all as specified.

M&L Granite 20mm thick black colour (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like, over & including 15 mm thick screed bed in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite in repairs.

M&L 25 mm thick PCC M-15 grade (Nominal mix) using 20 mm graded stone aggregate as in floor finishes without using extra cement complete all as specified.

M&L for machine cut machine polished Kota stone slab flooring 18-20mm thick (minimum size 550mm x 550mm) laid and jointed with grey cement slurry mixed with pigments to match the shade of the slabs including rubbing and mirror polishing complete over and including 15mm thick screed bed or bedding layer of cement mortar 1:3, all as specified and directed by Engineer - in - Charge.

M&L non skid coloured cermic ENDURA tiles 10mm thick area n. exc. 0.11 Sqm set and jointed in neat cement slurry & pointed with coloured cement to match in floor over & including 15 mm thick screed bed in CM 1:4 complete.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in roof covering fixed with self tapping screws complete.

M&L 0.80mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275.

Dismantling timber scantlings (framed work) exc 40 Sqcm in section, in any position.

M&L for rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed by Engineer-in-Charge.

Dismantling posts or struts (Steel or RCC) including taking out embedded portion including demolition of PCC if any and making good disturbed ground complete all as specified and directed by Engineer-in-Charge.

M&L providing reinforced cement concrete M-15 grade (Nominal mix) using 20mm graded stone aggregate as in precast posts, fencing posts, streaming or terminal posts, struts etc. for fencing average sectional area exceeding 100 Sqcm but not exceeding 200 Sqcm with or without chamfered angle and flat splayed rounded or mitered tops and fixed complete all as specified and directed by Engineer-in-Charge

M&L TMT bars, 10mm dia and over cut to length, bent to shape required including cranking bending, spirally for hooping for columns, hooking ends, etc. & binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engineer-in-Charge

All as per item No.123 here in before but for 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binder etc. complete all as specified and directed by Engineer-in-Charge.

Dismantling of fencing wire mesh, any type or size complete all as specified and directed by Engineer-in-Charge.

Dismantling galvanized iron barbed wire of any size from fencing posts etc. complete all as specified and directed by Engineer-in-Charge.

S & F galvanized, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and provision of galvanized mild steel wire, staples and steel pins etc. complete all as specified and directed by Engineer-in-Charge. Note: Each line of wire shall be measured separately.

All as per Srl item No. 127 here-in- before but restraining and resecuring existing wire, to posts and including making good tying wire staples complete all as specified and directed by Engineer-in-Charge.

Supply only chain link mild steel galvanized fencing any size or type complete all as specified and directed by Engineer-in-Charge.

Fixing only of chain link fencing any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire complete all as specified and directed by Engineer-in-Charge. Note : Supply of chain link fencing shall be measured and paid for separately under relevant item of BOQ.

Excavation in post holes (or similar holes) each n.exc. 0.50cum getting out returning filling & ramming earth or broken rubble mixed with around in layers n.exc. 25cm thick, watering & removing surplus soil to a distance n.exc. 50m and making good complete all as specified and directed by Engineer - in - Charge.

M & L cement concrete M-10 grade (Nominal Mix) using 40mm graded stone aggregates as in foundation, fillings and mass concrete complete all as specified and directed by Engineer-in-Charge.

S & F mild steel work of Fe-290 (Grade E-165) as in angle iron fencing posts, struts and in flat iron for fixing chain link fencing including cutting tops to shape as directed, bent to shape, drilling holes, notching, hooking for wire etc. complete all as specified and directed by Engineer-in-Charge.

M & L mild steel work as in flat or rounded bar etc. as in posts and struts in fencing including cutting top to shape, drilling holes, including bolting etc. conforming to Gde Fe-290 (Grade E-165) complete all as specified and directed by Engineer-in-Charge.

M & L preparation of new steel and iron surface of any description not exceeding 10cm in width or girth when unconnected with other painting or when painted in different tint, priming with red oxide primer and applying two coats of synthetic enamel paint (ordinary tint) complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide Primer complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted steel surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

S & F mild steel screw bolts 10mm dia of shank (machine made) with hexagonal or square shape heads at one end screwed the other, or screwed both ends and each screwed end to be fitted with washers and one hexagonal or square nut length of bolt not exceeding 10cm complete all as specified and directed by Engineer-in-Charge.

M&L for Brickwork straight or curved on plan exc 6m mean radius built in cement mortar 1:6 but except bricks complete all as specified. Note: Brick obtaine under item No 63 shall be reused

Demolition of reinforced cement concrete (reinforcement cut as required to facilate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge.

M&L providing 40mm thick plain cement concrete M-15 grade (Nominal mix) using 12.5mm grade stone aggregate in louvers and jallies, (measured solid) including all moulds, frames etc set in cement 1:4 complete all as specified and directed by Engineer - in - Charge.

M&L for reinforced cement concrete M-15 grade (Nominal mix) using 20mm graded stone aggreagate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

Dismantling of structural steel work including door,gates but excluding framed truss etc any type or size complete all as specified and directed by Engineer-in-Charge

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other overing. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides ) and hanging also fastening and fixing complete confirming to Fe290 Gde E-165 complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No.144 here- in- before but fabrication,erection and fixing only complete all as specified and directed by Engineer-in-Charge

M&L 75 mm thick cement concrete M-7.5 grade (Nominal mix) using 40 mm graded stone aggregate as in sub base finished even and fair complete all as specified and directed by Engr-in-charge.

M&L 25mm thick, cement concrete M-15 grade (Nominal mix) using 20mm graded stone aggregate as in floor finishing the concrete surfaces even and fair complete all as specified and directed by Engineer-in-Charge.

M&L for sand filling under floors incl consolidation complete for laying paver block.

S & F precast machine pressed concrete interlocking paver blocks any shape and size conforming to IS-15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment complete all as specified and directed by Engineer-in-Charge.

M&L continuous brick edging with old size bricks of whole Sub Class 'B' Bricks with width equal to depth of brick laid on end vertically complete all as specified and directed by Engineer - in - Charge.

mh enterprises

Ms Kamal Kant Agarwal

Ahmed constructions