REPAIR/MAINT TO FENCING, DRAIN, PATH, CULVERT IN ZONE 10 AND 14 AT MIL STN TALBEHAT UNDER AGE(I) TALBEHAT

Amount

Dismantling post or struts(wood, steel or RCC) any section including taking out embedded portion from natural ground and making good the disturbed ground complete all as specified and as directed by Engr-in-Charge.

Dismantling expanded metal any thickness or mesh, fixed with steel or wooden fillets, if any wt n.exc 4Kg/Sqm complete all as specified and directed.

Dismantling of Barbed wire fencing or any type and size

Excavation in post holes (or similar holes) each n exc 0.5 cum getting out, returning, filling in and ramming earth and removing surplus soil to a distance n.exc 50 m in soft/loose soil complete all as specified and directed.

M&L for PCC 1:3:6 , type C-2, using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

S&F MS hand rails, half round or other stock section or core for wooden hand rail, straight portion drilled and countersunk for balusters, running bars, door frame, balusters, nosing to steps including embedding in concrete land screwing etc frame of wire mesh wind tiles for roof including securing bolts, posts, struts in fencing including cutting tops to shape as directed drilling holes, notching for wire etc, flat iron, fillets(for securing wire mesh etc including all necessary drilling bolting welding or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engr-in-Charge.

S&F expanded metal welded steel wire fabric, made of GI hard drawn wire mesh of size 25mmX25mm, plain steel wire with hot Zinc coating , fixed to MS frame work complete all as specified and as directed.

Supply only chain link MS galvanised medium coated confirming to as per IS-2721-1979 fencing 75mm x 75mm mesh & 3.00 mm dia of wire complete all as specified and directed.

Fixing only chain link fencing incl line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provn of binding wire complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in loose/soft soil complete all as specified and directed.

S&F Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for Chain link fencing confirming to Fe 410-w (Gde E-250) complete.

M&L for 5 to 10 mm dia mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers etc complete all as specified and directed.

S&F galvanised medium coated as per IS -4826, 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel complete all as specified and directed.

Preparation of new steel surfaces of any description n. exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new steel surfaces over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F precast cement concrete louvers and jallies 35 mm thick made in Mix 1:2:4 type B0 using 12.5mm graded stone aggregate set in cement mortar 1:4 etc complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc incl racking out joints , hacking for key, scrubbing down with water etc. Complete all as specified and directed. Note: All debris obtained from taking shall be removed 1.5km to 2km complete all as specified and as directed.

M&L for rendering 15 mm on fair faces of brick work finished even and fair without using extra cement in CM (1:4) mixed with liquid water proofing compound as per manufacturer instructions complete all as specified and as directed. Note:- Liquid water proofing compound shall be measured and paid separately.

Supply only liquid water proofing compound.

S&F factory made stainless steel grade AISI 304 railing with top hand rail of 50 mm dia , intermediate rails 02 Nos of 18-19 mm dia and 40 mm vertical member (baluster) top fit all as approved by AGE(I), all necessary fittings and fixtures required including fabrication and fixing for ramp or path ways spacing between vertical post 0.90 m and height of railing is 90 cm above ground level complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. Note: All debris obtained from demolition shall be removed 1.5km to 2km complete all as specified and as directed.

M&L for PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundations, fillings, mass concreting complete all as specified and directed.

M&L for PCC interlocking tiles, coloured, reflective type/rubber moulded, conforming to IS-15658-2006 of 60mm thick , M-35 grade of approved quality,laid over and incl 50 mm thick sand cushion vibrated with mechanical vibrator complete all as specified and directed.

M&L for PCC interlocking tiles, coloured, reflective type/rubber moulded, conforming to IS-15658-2006 of 80mm thick , M-40 grade of approved quality, laid over and incl 50 mm thick sand cushion vibrated with mechanical vibrator complete all as specified and directed.

M&L for Heavy duty ceramic tiles size 300x300x 8-10 mm thick any colour set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tile laid over 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for Glass Mosaic tiles any colour/pattern decided by Engr-in-Charge, set and jointed as per manufacturer instruction complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm crushed stone aggregate) as in sub base or similar work complete all as specified and directed.

M&L precast cement concrete 1:2:4, type B1, (using 20mm crushed stone aggregate) as in kerb stone set in cement mortar 1:4 complete all as directed by Engr-in-charge.

Demolition of brick work or stone / boulder masonry , built in cement mortar incl all quoins , pillars etc complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius with old size brick built in CM 1:4 complete all as specified and directed.

Ditto above item except brick complete all as specified and directed.

M&L for PCC 1:2:4, type B0 using 12.5mm graded stone aggregate as in coping/channel benching of manhole and similar work, laid to shape and slope surfaces finished even and smooth using extra cement including necessary form work etc complete all as specified and as directed

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for. Note: All debris obtained from demolition shall be removed 1.5km to 2km complete all as specified and as directed.

M&L for providing precast cement concrete type B-1 1:2:4 20 mm graded aggregate as in cover slabs for manholes/septic tank/drains & set in CM 1:4 complete all as specified and as directed.

S&F TMT bars 10 mm dia and over cut to length bend to shape required incl. cranking hooking ends and binding with and incl. MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed

S&F MS round bar of 10mm dia and over as in rungs/handle for manhole cover/Septic tank cover conforming to Fe-410-W (Gde. E-250) complete all as specified and as directed

M&L for Reinforced concrete pipes 300mm, class NP2, laid and jointed complete with collars and laid in trenches complete all as specified and directed.

M&L PCC 1:2:4 type B-2 using 40mm stone crushed aggregate 100 mm thick as in floor complete all as specified and directed.

M&L preparation new plastered surfaces of walls and providing two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparing of surfaces of walls by washing rubbing down & stopping of painted surfaces and applying one coat of cement base paint, in any colour complete all as specified and as directed

Description same as per item No 40 above but applying subsequent coat of cement base paint on walls complete all as specified and as directed.

M&L for preparation of plastered surfaces of wall and applying one coat of weather proof exterior emulsion paint complete all as specified and as directed.

M/S Kharya Associates

HARNAM SINGH ANIL SINGH

M/S SHIVA TRADERS

M/s Indu Enterprises