Design, Fabrication, Supply, and Installation of FRP puls GRC Thematic wall (Mounted on Existing wall) at Paliwal Park

Design, fabrication, supply, and installation of FRP + GRC thematic wall of total length 300 meters and height 3 meters, to be placed on the existing boundary wall at site. The wall shall consist of FRP mural panels placed between GRC columns, along with GRC base and top coping, all designed as per approved thematic concept (Ayush, Vedic Science, Indian Nobel Laureates, Indian Astronomy, etc.).The work shall include complete design detailing, fabrication, finishing, transport, installation, and retrofitting works, wherever required, complete in all respects as directed by the Engineer-in-Charge.The FRP murals shall be fabricated from premium-grade Fiber Reinforced Polymer (FRP) of 450 GSM using ISO-certified polyester resin and E-glass fiber. Each mural panel shall have 4–5 layers (alternate layers of resin and fiberglass mat) with a minimum thickness of 5–6 mm, excluding surface coating. The finish shall be UV-protected, weather-resistant, and coated with two coats of exterior-grade polyurethane (PU) or nano-acrylic finish. FRP shall be fire-retardant (IS 6746 compliant), anti-fungal, and anti-fade in nature. Panels shall be fixed to the base structure with stainless steel (SS 304) anchor fasteners and supported by concealed MS framing.The GRC components (columns, base, and coping) shall be made of Glass Reinforced Concrete (GRC) using alkali-resistant glass fiber, cement, and sand in the ratio of 1:1:0.04. The minimum thickness of GRC shall be 30–40 mm for columns and coping and 30 mm for base panels. The compressive strength shall not be less than 40 MPa. The finish shall be smooth or stone-textured with a final coat of acrylic sealer for waterproofing and durability. Columns shall be spaced at 4-meter intervals, matching the mural panel width.The work shall also include structural assessment and retrofitting of the existing boundary wall to ensure proper load-bearing capacity. If required, the contractor shall carry out strengthening of the wall through cement mortar plastering, chemical anchoring, addition of a brick layer (230 mm thick maximum), or by providing additional foundation or footing wherever necessary. All retrofitting, civil repair, or brickwork strengthening works needed for the installation shall be considered included in this job.All installation work shall be carried out following CPWD specifications and GRCA guidelines, maintaining a maximum tolerance of ±5 mm in alignment. All hardware used shall be of SS 304 grade to prevent corrosion. The joints shall be properly sealed with UV-resistant flexible sealant to avoid water ingress. All materials shall be procured from ISO-certified manufacturers, ensuring long-term durability, aesthetic finish, and weather protection. The contractor shall be responsible for complete site preparation, transportation, fabrication, installation, finishing, testing, and handing over of the wall in perfect working condition.This item includes all materials, labour, machinery, scaffolding, retrofitting, foundation work, finishing, and necessary accessories, complete in all respects on a turnkey basis, as directed by the Engineer-in-Charge.