PROVN OF STORE ROOM AT WARDEC AND CERTAIN OTHER MINOR WORKS UNDER AGE B/R-I AND AGE E/M OF GE (SOUTH) DELHI CANTT-10

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and as directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and getting out in soft/ loose soil complete all as specified and as directed.

M & L for cement concrete type D-2 1:4:8 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M & L for steel formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and Plinth Beams; and similar work; vertical or to batter and fair finished surface complete all as specified and as directed.

M & L for steel formwork to sides of pillars, posts, struts, piers, columns and stanchions sqaure and rectangular or poly gonal and fair finished surface complete all as specified and as directed.

M & L for steel formwork with fair finish to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

M & L for steel formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. with fair finish complete all as specified and as directed.

M & L for steel formwork to edges with fair finish of concrete surface flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed.

M & L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips grade 500/550d complete all as specified and as directed.

All as per srl item No 9.00 here-in-before but 6mm to 8mm dia.