Construction of Crematorium at Tirhale village, Taluka-Deola , Dist Nasik

Essential/ Prequalification Criteria

Annual Turnover: Average annual financial turn over during the last 3 years (Financial Year), ending 31st March 2023 of the previous financial year /Accounting year [ should not be less than 30% of Amount put to tender] i.e Rs. In Lakhs

Turn over (Rs. In Lakhs)

Audited copies and Audit report by CA with UDIN of financial documents for last three (3) years Viz.Balance sheet, P &L account, Supporting Schedules and notes to account.

Solvency : Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of tender Submission.( Should not be less than 40% of the estimated cost i.e Rs. In Lakhs)

Related Document to be Uploaded to eProcurement Portal.

Not meeting eligible criteria

Experience:

You are Not Eligible

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

GSTIN Registration Number.

ESIC Registration Number

EPF Registration Number

Earnest Money Deposit (EMD)

License for execution of Electrical works and other specialized works from the concerned authorities /organizations/bodies (applicable for Electrical works combined with Civil works)

Undertaking Annexure-L

Documents to be uploaded along with tender

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc.,

Address for correspondence

Contact details

PAN No.

I.T Returns for past 03 years (Assesment Year)

Related documents to be uploaded in eprocurement portal.

Details of person holding the power of Attorney.

Related documents to be uploaded in eprocurement portal.

Bank(s) details: [Copy of the cheque leaf to be uploaded]

ECS Bank details as per Annexure in tender documents , signed and sealed by concerned bank to be Uploaded to eProcurement Portal and hard copy of original ECS and cancelled cheque to be submitted to address mentioned in e-tender notice for refund of EMD or payment etc.

Acceptance by party for Scope of work as per BOQ and Tender terms & conditions

DECLARATION

The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions ( Page 1 to 146) including price bid do hereby accept all the terms and conditions laid down

I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer.

Specification

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead all complete and as directed.

Demolishing cement concrete of Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) manually/ by mechanical means in any position including disposal of material/debris off the site within 50 metres lead and stacking for further disposal all complete and as per direction of EIC.

Demolishing brick work built in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Dismantling GS Sheet in roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead for further disposal all complete and as directed.

Removing the excavated surplus soil / material / dismantled debris including loading, conveying and depositing at a place at a distance upto 1KM from starting point as directed and spreading & levelling all as directed by EIC.

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. all complete and as directed. Note: This item will be paid only where no other item of excavation is paid.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift as directed by Engineer-in-charge.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation, trenches, drains or like (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lifts , including getting out the excavated soil and disposal of surplus excavated soil , within a lead of 50 m all complete and as directed by EIC. Note: Soil, if any, which is required for refilling shall be stacked at site as per the directions of EIC.

Filling with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lift as directed by EIC. Note : Earth from excavation other than BC soil and rock.

Supplying, stacking and filling of excavated murum (including royalty) by mechanical transport in foundation, trenches, plinth, sides of foundation, floors ,etc in layers not exceeding 20cm including watering and ramming/ compaction with mechnical vibrator/roller each layer for all lift all complete and as directed by EIC.

Providing and laying in position 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) including mixing, laying, curing, fininshing to level & line etc all complete as specified and as directed by EIC.

Providing Centering and shuttering for plain or reinforced cement concrete straight, horizontal, sloping as required including all cutting & waste, centering, bracing, strutting and removing the formwork after the retention period complete as specified & as directed for:

Providing and laying in position 1:1.5:3(1 cement:1.5 coarse sand: 3 graded stone aggregate 20mm nominal size) of reinforced cement concrete, including mixing, placing in position, compacting, vibrating, curing, finishing the exposed surface of concrete smooth/hacked complete all as specified and as directed.(MS reinforcement and form work will be paid seperately).

Providing and laying in position TMT deformed MS reinforcement of grade Fe-500D, for R.C.C. work including straightening, cutting to required length, bending, hooking, cranking, placing in position and binding with MS wire (annealed) not less than 0.9 mm Dia. or securing with clips including necessary lapping, spacers/cover blocks complete all as specified and as directed by EIC.

Providing and fixing in position steel work in built up tubular (Electric resistance or induction butt welded tubes-round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. all complete as directed.

Providing & fixing in position colour coated corrugated galvalume sheet of 0.50 mm thick (total coated thickness) having high tensile strength of 550 mpa, with metallurgical coating of zinc aluminium alloy of 150 grams /Sqm (AZ 150) (both side inclusive ) conforming to ASTM -792 & AS 1397 having profile depth approximate 28mm high rib with subtle square fluting in the pan and the end rib shall have anti-capillary groove and return leg for roofing / cladding/ridge including sheet shall be fastened with 40μm zinc coated or 25μm zinc-tin alloy coated, Hex head, self-drilling screw as per AS 3566-2002 Class 3 fasteners with neoprene/EPDM washers. The sheet will have coating of minimum 20 microns of painting over corrosion inhibiting primer (min 5 micron) on top side & standard backing coat on reverse side. All penetrations and laps shall be sealed with silicon or equivalent sealants while laying the sheet. End overlap wherever required shall be minimum 150 mm & side lap are full rib as per manufacture catalogues.

Providing and laying, spreading and compacting stone aggregate 90 to 45mm to WBM specifications in uniform thickness, hand picking , rolling with hand compactor/3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of creening/binding material sand to fillup interstices of coarse aggregate, watering and compacting to the required density all complete and as directed.

Providing and constructing subclass 'B' Bricks , straight or curved on plan to any radius in half brick thick masonry in CM 1:4 above or below ground at any height and level using class B bricks including providing reinforcement if required and as directed by the engineer In charge, necessary scaffolding, curing complete as specified and as directed. (Brick of class designation 35kgf/cm2)

Providing and applying 5mm thick sand faced plaster on faces of brick work in cement mortar 1:4 and/or concrete surfaces over and including a backing coat of 10mm thick in cement mortar 1:4 using fine sand, trowling, finishing to a smooth and even surface with straight edges, scaffolding, curing complete all as specified and as directed.

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. all complete and as directed.

Providing and Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Providing & applying painting with synthetic enamel paint on any surface of steel, wooden or plastered surface of approved brand and manufacturer of required colour to give an even shade : One or more coats on old work including preperation of surface remove dust, scrap with sand paper etc complete all as specified & directed by EIC.

Providing and laying polished Granite stone Black, Cherry/ Ruby red or equivalent in flooring, steps, etc. of required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Providing edge moulding to 18 mm thick Granite work, marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Providing and fixing 25mm thick kota stone slab flooring over 20 mm (average) thick cement mortar 1:4 base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete and as directed.

Providing and fixing 20mm thick kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete and as directed.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., all complete and as directed.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. all complete and as directed.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) all complete and as directed.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

Providing and fixing PTMT bib cock of approved quality and colour, 15mm nominal bore, 86 mm long, weighing not less than 88 gms all complete and as directed.

Providing and fixing 15mm dia, 86mm long PTMT stop cock of approved quality and colour all complete and as directed. Minimum weight of stop cock shall not be less than 88 gms

Writing Letters --- Lettering with black Japan/white paint of approved brand and manufacture all complete and as directed.

Providing, fabricating ,hoisting & fixing in position structural steel work in single section, fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved zinc chromate red oxide steel primer all complete and as directed.

Providing and laying non-pressure 300 mm dia NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. all complete and as directed.

Providing and laying 60mmthk factory made chamfered edge Cement Concrete paver blocks M-35 grade in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge

Providing and fixing in position C.I. Crematorium Pyre, bearing Temp.900 degree Celsius , minimum weight 540 kg suitable for I.W.C. to be fixed at least 6 inch into the ground/concrete bed prepared, pyre size 2.00 meter long , 1.00 meter wide and 1.30 meter height of perforated plate. made up of Cast Iron Alloy & supported on mild steel channels, angles, etc. all complete as specified and directed by EIC.( Bed concrete will be paid seperately)

Supply & Planting plants and shrubs, including digging of pits of size 0.30x0.30x0.30m an as filling back, removing unwanted material to outside of that perticular garden site including stacking (if require) and watering after planting.of plants and shrubs.

Supply and Installation of Precasted RCC Water tank of 3000 litre capacity completed all as specified & directed by EIC.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50 x 50 mm made of G.I. wire of dia 4 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.

Testing of soil for SBC by Direct Shear Test as per IS-2720, at any locations of CSR projects in Nashik district. Excavation will be paid seperately under relevant item of excavation.

Supply And Installation Of SPN 12 Way, Double Door, Distribution Board (D.B.) Make: Siemens / L & T / ABB / C&S /Polycab/Legrand/Standard

Supply And Installation Of 63 Amp., DP MCB, Breaking Capacity 10KA, Make: Siemens / L & T / ABB / C&S /Polycab/Legrand/Standard

Supply And Installation Of 6 A To 32 Amp.,Breaking Capacity 10KA, SP Make: Siemens / L & T / ABB / C&S /Polycab/Legrand/Standard

Supply And Installation Of 16 Amp., DP MCB, Breaking Capacity 10KA, for control at each class room / office / toilet / hall etc. Make: Siemens / L & T / ABB / C&S /Polycab/Legrand/Standard

Supply of materials & carry out point wiring (for fans, lights, etc.) using “HAVELLS / ANCHOR / FINOLEX / POLYCAB / TORRENT/R R KABLE” make 1.5 Sq.mm. stranded copper conductor, PVC insulated wire & 1.0 Sq.mm copper earth wire, “PRECISION / MODI / FINOLEX / POLYCAB / PRESSFIT” make PVC conduit / casing capping, “ANCHOR / M.K / LEON/ L & T/Crabtree" make 6A modular switch, socket, modulr metal flush box, modular surface plate, ceiling roses etc. Note: 1) Measurement shall be “point wiring” wise and one switch controlling one point shall be counted as one point. 2) Switch & socket installed on same board will be treated as a half point. 3) This may be a conceal-wiring work or surface wiring work.

Wires / cable for circuit/submain wiring alongwith earth wire with the following sizes of FR is PVC insulated copper conductor, single core cable in surface/ recessed as required. 2x2.5 sq. mm + 1x1.5 sq. mm earth wire. Wire / Cable Make: HAVELLS / ANCHOR / FINOLEX / POLYCAB / TORRENT/R R KABLE

Supply of materials & carry out point wiring using HAVELLS / ANCHOR / FINOLEX / POLYCAB / TORRENT/R R KABLE make 2.5 Sq.mm. copper conductor, PVC insulated wire & 1.5 Sq.mm copper earth wire, PRECISION / MODI / FINOLEX / POLYCAB / PRESSFIT make PVC conduit / casing capping, “ANCHOR / M.K / LEON/ L & T/Crabtree" make 16A, 3 module, modular switch, socket, modular metal flush box, modular surface plate etc. Note: 1) Measurement shall be “point wiring” wise. 2) This may be a conceal-wiring work or surface wiring work.

Supply & Laying Of XLPE Insulated,Armoured Heavy Duty Electric Cable With Aluminium Conductor, 1100 V Grade, 4 Core X Cross Sectio Area 16 Sq.Mm. (Execution as per site requirement.) Make: HAVELLS / ANCHOR / FINOLEX / POLYCAB / TORRENT/ RR KABLE

Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. On pole or wall with the help of necessary fixtures. Make: Bajaj/ Crompton / Havells / Philips / Syska.

Supply and installation of LED batten, 22 W / 24 W, with all fixing material like screws, clips etc. Make: Bajaj/ Crompton / Havells / Philips / Syska.

Cutting chase, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, etc., and making good, cutting not exc. 10 girth.

Earthing with GI earth plate 600mm X 600mm X 6mm thick, including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 mtr long etc. with charcoal/coke and salt or bantonite powder as required.

Supply and installation of Switch Fuse Unit (SFU) with sheet steel enclosure 500 V, 3 phase with HRC fuses complete with Neutral link of capacity 63 Amps. (Suitable for external / wall mounting.) Make: Siemens / L & T / ABB / C&S /Legrand/Standard

Rupees Forty Lakh Eighty Four Thousand Three Hundred Seventy Seven and Sixty Five Paise Only

Approximate Basic Amount Put to Tender

Rupees Seven Lakh Thirty Five Thousand One Hundred Eighty Seven and Ninety Seven Paise Only

Rupees Forty Eight Lakh Nineteen Thousand Five Hundred Sixty Five and Sixty Three Paise Only