Restructuring of Fun Park and Allied Infra at Surinsar (under State Capex plan 2026-27)

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Foundations, footings, bases for columns

Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc.

Silt clearance from canals. Inclusive of initial lead and lift (50m & 1.5m respectively) Wet

Providing, supplying, fabricating and installing four-compartment outdoor iron dustbin of approw Hecorative design and pattern for collection and segregation of wet waste, dry waste, sanitary wa and special-care waste, suitable for installation at parks, temple precincts, tourism destinations, public gardens, walkways and other public places, conforming to the requirements of the Solid Waste Management Rules, 2016. The dustbin shall consist of four separate cylindrical iron drums/containers, each having a minimum capacity of 70 litres, with a total capacity of 280 litres and each drum shall have dimensions of more than 350 mm diameter and 650 mm height. The dr shall be fabricated from good-quality mild iron (GI?) sheets/sections of adequate thickness and strength, duly cut, rolled, welded and assembled, with properly finished edges and joints. Each Compartment shall be clearly identified and suitably marked/labeled as "WET WASTE", "DRY "WASTE", "SANITARY WASTE" and "SPECIAL-CARE WASTE", with appropriate colour coding/signage as approved. The dustbin shall be provided with suitable supporting frame/stand, and arrangements for secure placement/fixing at the designated location, including necessary bas plates, anchorages and fixing accessories.

Supply, Installation, Testing & Commissioning of Solar Street Light System consisting of Energy-efficient LED luminaire (9W to 24W), IP65/IP66 rated, minimum luminous efficacy of 130 lunens/Watt, In-built Lithium Ferro Phosphate (LiFePO4) battery with a minimum of 2000 charge-discharge cycles, Integrated solar charge controller (PWM/MPPT) with automatic dusk-to-dawn functionality, adequate wattage (MNRE approved, 25-year performance warranty), pole of 4 to 6 meters height with base plate, bracket arm, and necessary mounting accessories (as per IS 2713 standards), Civil foundation work including excavation, PCC (1:2:4), clamps, connectors, conduit pipes, and all necessary hardware, Proper earthing and lightning protection as per IS 3043, Transportation, unloading, on-site installation, and commissioning, Provision of printed operation and maintenance manual and on-site training to designated personnel Complete as per directions of the Engineer-in-Charge

Providing, supplying, fabricating, assembling and installing three-seater outdoor steel bench of approved design and pattern, suitable for permanent public seating in parks, temple precincts, tourism destinations, walkways, gardens and other public places, comprising ornamental wrought iron frames, legs and armrests of adequate strength and rigidity, with seat and backrest fabricated from Mild Steel (MS) hollow pipes/sections of approved size and thickness, including cutting, bending, welding, grinding, drilling, shaping, fixing and finishing complete in all respects. The entire steel work shall be thoroughly cleaned, prepared and given two coats of approved quality synthetic enamel paint of specified colour and shade, applied uniformly to all exposed surfaces. The bench shall be securely and permanently installed at the approved location after necessary setting out and earthwork, by embedding/fixing the supporting legs in a properly prepared cement concrete foundation of mix 1:3:6, including excavation, dressing of foundation bed, framework wherever required, placing, compacting and curing of concrete, and making good the surrounding ground. The complete work shall include all materials, labour, tools, tackles, machinery, transportation, loading. unloading, fabrication, erection, fixing, painting and all incidental works necessary to provide a durable, stable, weather-resistant and aesthetically finished three-seater decorative outdoor steel bench, complete in all respects as per approved drawing/design, specifications and directions of the Engineer-in-Charge.