CWE/D-10/2022-23

Amount

SCHEDULE-A PART I

Comprehensive maintenance, upkeep of all internal and external assets of 200 Qtrs, MES service centre, Servant Qtrs at DK-II complex under AGE B/R-I complete including attending and rectifying day to day complaints, Repair/ Replacement of parts and supply only items (Ref notes here in after), by deploying minimum work force/manpower as stated vide PS clause 52.39 on CA Ser Page No 76 from 9 AM to 5 PM. The site includes Dwelling units/ Residence accommodation of VIP, Army officers, therefore the work force must posseses all necessary T&P reqd for the work. Also note that based upon number of complaints and quantum of work involved and during emergencies irrespective of working hours, the work force/man power is required to be increased accordinlgly as decided by GE/Engineer-in-Charge. The rates for same is deemed to be included in this item only and nothing extra shall be paid and no claim is admissible on this account.

Maintenance/ cleanliness of complete sewage drainage system by attending day to day complaints by deploying SEWER MEN (UNSKILLED) from 9 AM to 5 PM excluding sundays/ holidays. The number of workers are required to be increased based upon number of complaints and quantum of work involved and during emergencies irrespective of working hours as decided by GE/Engr-in-Charge. The rates for same are deemed to be included and nothing extra shall be paid and no claim is admissible on this account. The work includes rectifying all the complaints, repair/replacement of parts, labour for fixing applicable supply only items as enlisted in sch A pt II and making the system fully functional wrt sewage drainage system of any depths, opening/cleaning of chocked sewer pipes, drains, manholes, gully traps, WC's, WHB's, sinks, floor/Gully trap etc to all floor and vertical stacks of all sizes to keep sewerage and drainage system fully functional including disposal of silt, sludge malbah, debris, waste material and replacement of damaged Gully traps, oval asses door cover, manhole cover/Gully trap cover etc to the entire satisfaction complete all as spd and directed by GE/Engineer-in-Charge.

Maintenance, repair/ replacement of furniture/carpentary items by attending day to day complaints by deploying Carpenters (Skilled) from 9 AM to 5 PM excluding sunday & holidays. The number of workers are required to be increased based upon number of complaints and quantum of work involved and during emergencies irrespective of working hours as decided by GE/Engr-in-Charge. The rates for same are deemed to be included and nothing extra shall be paid and no claim is admissible on this account. The work includes rectifying all the complaints repair/replacement of parts, labour for fixing applicable supply only items as enlisted in Sch A part-II, including complaints related to furniture/carpentary items including repair of damaged doors, windows, ventilators of steel / wood / PVC etc. at all floors, fixing of glass panes of doors/windows, repairs to furniture, replacement all types of hardware fittings including T/bolts, sliding door bolts, handles, GI wire cloth, hinges as per existing, looking mirrors, cabinets, photo frames, cupboards etc and all other carpentry works required to keep them in proper functional and to the entire satisfaction complete all as spd & directed by GE/ Engineer-in-charge.

Maintenance, repair/replacemnt of plumbing/sanitary items by attending day to day complaints by deploying plumbers (Skilled) from 9 AM to 5 PM excluding sunday & holidays. The number of workers are required to be increased based upon number of complaints and quantum of work involved and during emergencies irrespective of working hours as decided by GE/Engr-in-Charge. The rates for same are deemed to be included and nothing extra shall be paid and no claim is admissible on this account. The work includes rectifying all the complaints repair/replacement of parts, labour for fixing applicable supply only items as enlisted in Sch A part-II, including complainsrelated to plumbing/sanitary items including repairing leakages or over flows of water from PVC/RCC overhead tanks, cisterns, replacement of Bib cocks, stop cocks, pillar cock, float valves, PVC Connection alongwith its fittings, EWC seat cover with fittings, SS Jet waste coupling, wast pipe, kit for low level cistern etc to keep the entire water supply/ sanitary system fully functional to the entire satisfaction complete all as spd & directed by GE/Engr-in-Charge.

Maintenance, repair/replacemnt of civil Work by attending day to day complaints by deploying Masons (Skilled) from 9 AM to 5 PM excluding sunday & holidays. The number of workers are required to be increased based upon number of complaints and quantum of work involved and during emergencies irrespective of working hours as decided by GE/Engr-in-Charge. The rates for same are deemed to be included and nothing extra shall be paid and no claim is admissible on this account.Work like internal and external plaster, flooring, pointing of roof tiles/ CC gola/ RCC work upto an area of 2.5 sqm including replacement of tiles upto 1.00 sqm and plastering upto 2.5 sqm, sealing of leakage from roof, walls, wall jonts, chajjas, floors traps, W.C/P traps and joints of pipes & fittings, gully traps and manholes including replacement of damaged floor trap, navi tap CI/PVC bends and restoration of existing finishing in the affected area and making fully functional to the entire satisfaction, complete all as spd & directed by GE/Engr-in-Charge.

Maintenance, repair/replacemnt of Electric Work by attending day to day complaints by deploying Electricians (Skilled) from 9 AM to 5 PM excluding sunday & holidays. The number of workers are required to be increased based upon number of complaints and quantum of work involved and during emergencies irrespective of working hours as decided by GE/Engr-in-Charge. The rates for same are deemed to be included and nothing extra shall be paid and no claim is admissible on this account. The work includes attending complaints related to repair/replacemnt of parts and fixing of supply only items as enlisted in Sch 'A' part II, including replacement of switches, sockets, ceiling roses, fan regulator, MCBs, LED 4 feet/2 feet electric bell, holder, fan bearings, geyser element, CP connection, NRV of geysers, capacitors etc and all other electric works required to keep them fully functional to the entire satisfaction, complete all as spd,& directed by GE/Engr-in-Charge.

Maintenance/upkeeping of al the records and status of day to day all kind of related complaints with works by installing Quick Response System (QRS) MES E Complaint system (Ref PS cl 75, 76 Ser Page No 79 by deploying Data Entry Operators (Skilled) from 9 AM to 5 PM including sunday & holidays. The rates also include cost of compatible computer sytstem, printer, peripherals, consumables, telephone, internet/broad band connection etc comprising of following duties:- (i) Downloading the complaints received from call centre on daily basis for assigning the work to the workers of respective trade. (ii) Uploading all the complaint received at the service centre by any mode in the MES E-Complaint System and uploading the status of attending the complaints on daily basis so that the back log is not more than one day/as per required complaint as per time/agreement. (iii) Preparing abstract for unattended compalint on daily, weekly and monthly basis and submitting the same to concerned Engr-in-Charge. (iv) Generation of vacation/ occupation report from service centre. (v) Failure in maintaining 24x7 QRS in working condition shall attract recovery @ Rs. 500/- per day. Spare capacity of QRS after attending emergency complaints may be utilized for attending routine complaints. (vi) The contractor shall take immediate action to attend all complaint lodged on MES e-complaint system or any complaint assigned to him through site order book / verbal instructions from Engineer-in-Charge or on telephones / through call centre of MES e-complaint system or through any mode, from occupants. In all cases he shall attend the complaints in the specified duration. (vii) The daily complaint monitoring system on the web based portal VYNUS Stars i.e Daily MES E-complaint System App will be used for lodging and attending complaints will be provided by MES to the contractor. (viii) The expenditure on account of internet for using app and infrastructure shall be borne by the contractor. Nothing extra shall be paid on this account.

(i) In subject work the contractor has to deploy adequate number of Helpers (unskilled) from 9 AM to 5 PM excluding sundays/Holidays to assist the skilled workers as mentioned for attending and rectiying day to day complaints related to all kinds of repair/replacement to be carried out in the works. The number of helpers are required to be increased based upon number of complaints and quantum of work involved and during emergencies irrespective of working hours as decided by GE/Engr-in-Charge. The rates for same are deemed to be included and nothing extra shall be paid and no claim is admissible on this account. (ii) Welder/blacksmith (Skilled) are to be deployed as and when required on complaint basis. The work includes electric welding machine, gas cutter, welding rods (ISI) including hire charges of welding machine, cost of welding rods, transportation of welding machine to site and carrying out other associated operations for attending the complaints and making system fully functional, to the entire satisfaction, complete all as specified and directed by GE/Engineer-in- charge. (iii) The contractor is also required to deploy 01 (one) site Engineer (Skilled) who will amicably supervise/ assist the entire works. The qualification shall be Degree in Civil Engineering with 03 years experience or Diploma in Civil Engineering with 05 years experience.

Notes:- (i) Quoted rates shall include repair of all minor items such as cups, washers, nuts & bolts, screws and all material required except specified under relevant item of supply only (Schedule A part II) etc or any other material as directed by Engr-in-charge. (ii) The quoted rates shall also incl the labour part for all the supply only items as enlisted under sch A part-II. (iii) Materials retreived from repair/replacement of parts or attending complaints, other than mentioned in credit schedule shall be the contractor's property and nothing shall be recovered from the contractor. Rates quoted are deemed to be inclusive of this aspect. (iv) Apart from above being VIP area, based upon Number of complaints & quantum of work involved and during emergencies irrespective of working hours, the additional work force is required to be deployed accordingly as decided by GE/Engr-in-Charge. The rates for same is deemed to be included in this item only and nothing extra shall be paid and no claim is admissible on this account. (v) The bidders are advised to pay due cognizance while quoting their rates with respect to minimum fair wages, periodical hikes in wages, repair/replacement of parts, labour charges for fixing of supply only items, extra manpower required keeping in view quantum of complaints/works and during emergencies for timely disposal and user facilitations for which no excuses shall be entertained.

(vi) The contractor is responsible to provide all T&P to all the manpower deployed, items such as Drill Machines, cutters, welding machines, scaffoldings etc as and when required at site. (vii) It may also be noted that the subject CA is for more than 01 year therefore the periodical change of workforce as per labour laws is the sole responsibility of the contractor i/c payment of minimum wages plus allowances etc and no worker shall have any lien/ claim of permanency in Govt Services during or after the contract period. (viii) For the details of the work force/labours required in the subject work refer PS clause 52.39 on CA Ser page No 76. (ix) Since the outsourcing of man power is involved therefore the overall quoted rate of Sch A part-I shall be not less than minimum fair wages and other applicable allowance as per labour laws/instructions in vogue, failing which the bids shall be treated as non bonafide and shall be summarily rejected. In this regard ref Sch 'A' Note 42.19, 42.20 on ser page No 22. The deciision of accepting officer in this regard shall be final and binding and without prejudice to all. No claim/representation shall be entertained in the subject matter

(x) Any other misc works/services connected with user facilitation as per direction of GE/Engr-in-Charge. (xi) Recovery on Absentees The contractor will maintain attendance records of the staff, which will be checked by the Junior Engineer/Engineer-in-Charge/GE of the work. In case of absence of any staff, recovery shall be made at the following rates: (a) Skilled @1500/- per day/ per person. (b) Semi-skilled @1200/- per day/ per person. (c) Unskilled @1000/- per day/ per person. (xii) Recovery on non attendance of complaints. The contractor shall take immediate action to attend any complaint assigned to him through site order book/verbal instructions from Engineer-in-charge or on telephones, MES call centres/IVRS from occupants. In all cases he shall attend the complaints in the specified duration. Penalty for non attending Complaints:- (a) Complaint pending 3-12 hours - 500 Rupees per complaint. (b) Complaint pending 12-24 hours - 800 Rupees per complaint. (c) Complaint pending 24-48 hours - 1000 Rupees per complaint. (d) Complaint pending more than 48 hours - 2000 Rupees per complaint. (xiii) Recovery on non wearing of uniform The employee and labourers engaged by the contractor under this contract shall wear neat and clean uniforms as approved by Engineer-in-Charge along with name badges, else recovery shall be made @ Rs 100/- per person per day.

SCHEDULE-A PART- II

Supply only Bathroom Cabinet PTMT of Size 450 x 350 mm

Supply only Bathroom Cabinet PTMT of Size 500 x 400 mm with hanging system

Supply only Bottle Trap CP brass 32 mm for Wash Hand basin and Sink

Supply only ready mix plaster of best quality as approved and directed by GE/Engineer-in-Charge

Supply only cement of 43 grade or grade as approved and directed by GE/Engineer-in-Charge

Supply only coarse sand locally available of best quality as approved and directed by GE/Engineer-in-Charge

Supply only fine sand locally available of best quality as approved and directed by GE/Engineer-in-Charge

Supply only Aggregate of nominal size 20/12.5 mm grade as approved and directed by GE/Engineer-in-Charge

Supply only old size bricks of class A best quality as approved and directed by GE/Engineer-in-Charge

Supply only Corner shelves Glass with CP guard rail of 4 mm thick 300 x 300

Supply only Curtain Rod Stainless Steel of 1.2 M Length with end finials.

Supply only Glass self Corner for bathroom of size 300 x 300 mm with CP guard

Supply only Glass self of Size 450 x 125 mm with CP double protection rail

Supply only Health Faucet CP 2 in 1 with 1 meter pipe

Supply only Health Faucet CP 75 mm dia with 1 meter pipe

Supply only Helical Door Spring MS of standard size with rail

Supply only Hydroulic Door Closure suitable for door mass of 61 to 80 Kgs best Quality

Supply only Kitchen Sink SS of Size 24 x 18x 8

Supply only Kitchen Sink SS with drain board of Size 36 x 18x 8 with drain board

Supply only Looking Mirror bathroom alum frame 450 x 600 Glass thickness 5 mm

Supply only MDF Board high density of Size 8'x 4' x 6 mm

Supply only Mixer bash basin CP brass 15 mm Centre hole

Supply only Mixer for sink 15 mm CP wall mounting swinging spout long bread

Supply only Mixer Wall Mounted CP Brass 15 mm non-Telephonic

Supply only Mixer Wall Mounted CP Brass 15 mm Superior Quality ISI Marked

Supply only Mixer Wall mounted CP Brass L-bend 2 in 1

Supply only Mixer wall mounting telephonic type CP brass 15mm with cruz

Supply only Plate Rack Stainless Steel of Size 24" x 24" x 10" of 0.8 mm thick

Supply only Plywood Commercial BWR 12 mm thick of size 8 x 4 ft

Supply only Plywood Commercial BWR 9 mm thick of size 8 x 4 ft

Supply only Plywood one side teaked face 8' x 4' x 6mm

Supply only PVC Pipe 75 mm dia

Supply only Shower Rose CP of Size 75 mm cast brass

Supply only Shower Ultra slim of size 200 x 200 CP brass.

Supply only Towel Ring Square CP Brass 18/20 mm dia

Supply only Vitreous China Wash Basin of Size 630 x 450 mm

Supply only Vitreuos China EWC of Size 520 x 360 x 390 with S Trap

Supply only Mortice lock

Supply only Night latch section

Supply only Curtain Rode (Double bracket)

Supply only Cistern kit (Single Piece WC)

Supply only Double Action Hinges 4 Inch

Supply only Paper Holder

Supply ony Vitreuos China WHB 550mmx 400mm

Notes. (i) To incorporate Gp-I makes only in the subject work. If due to non availabiltiy or any other reasons, the directions of GE/Engr-in-Charge shall be final and binding to incorporate other makes after the sample approval. Any make of sub standard/poor quality shall be replaced immediately and nothing extra shall be admissible on this account. (ii) The labour charges for all the supply only items of sch A part II is deemed to be included in sch 'A' part I. Nothing extra is admissible on this account.

SCHEDULE-A PART -III

M&L Preparation of old decorated surface (plastered or unplastered) of walls incl cornices pillar etc by brooming down or steel wire brushing scraping down smoke root mould moss and efforesceent salts and treating oil and greasy spots as applicable and applying one coat of white wash on wall .

Ditto- all as per item No 50 above but applying two coats of white wash

Ditto- as per item No 51 above but applying one coat of white wash on ceiling.

Ditto- as per item No 52 but applying two coats white washing on ceiling.

Preparation of old decorated surfaces (Plastered or unplastered) of walls incl conrnices, pillars etc by brooming down or smoke root, moulds mass includidng applying one coat of colour wash.

All as per item No 54 above but two coats of colour wash on walls.

M&L for Preparation of old painted surfaces of wood based surfaces of any description over 10 cms width or girth and applying one coat of synthetic enamel paint , complete all asspecified.

Ditto- as per item No 56 above but applying two coats of synthetic enamel paint –ditto-.

Preparation of wire mesh surfaces by brushing and applying a coat of synthetic enamel paint on GI wire mesh complete (measured over all one side only).

M&L for Preparation of old painted surfaces of steel of any description over 10 cms width or girth and applying one coat of synthetic enamel paint , complete all as specified.

Ditto- all as per item No 59 above but applying two coats of synthetic enamel paint –ditto-.

Complete removal of existing old treatment on surface from walls with machenical scraper (machine) complete all as specified and directed.

M& L a coat of alkali resistant primerover alread prepred surface of walls complete all as specified and directed.

M& L for preparing the entire surface with applying 2-3 mm thick birla/ JK wall care putty on walls/ ceiling surface finished even and smooth complete all as specified and directed.

M& L for applying two coats of oil bound distemper on wall surface with roller brush complete all as specified and directed.

M & L preparing old surface including washing, rubbing, filling holes,and uneven surface finishing old surfaces even and smooth with ,JK/Birla Wall care putty/POP, and surface shoulld be even and smooth applying one coat of oil bound distemper on wall surfaces with roller brush of complete all as specified

Complete removal exising treatment of old surfaces of wall scrubbing by WITH machenical scrapper (machine) with hard brushing ,brooming down or steel wire brushing scraping down smook root mould moss and efforescent salts and treating oil and greasy spots as applicable and washing with water and applying 2-3 mm birla wall care putty Two coats of weather proofing exterior acrylic emulsion paint of DULUXWeather shield Max or APEX ULTIMA from Asian paint over one coat of primer from the same manufacturer white lime wash even and smooth with roller brush complete all as specified and directed.

Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame) complete all as specified

M&L for Plain, solid, straight chowkats and frames made of 2nd class hard wood (sal), wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed,making good , complete all as specified and as directed by Engineer-in-Charge.

S&F for 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

M&L for 35 mm thick 2nd class hard wood glazed and skelton door shutter, factory made, open rebated and prepared to receive glass/guage etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 20(a) and fixed to chowkat, complete all as specified.

S&F for 150 mm size aluminium, anodised barrel tower bolts of extruded section and fixed to shutter complete

S&F for MS 300mm size, door spring ordinary rat tail rod pattern springs including roller and roller plate complete.

S&F for 100 mm size long mortice lock vertical type ,4 levers with key in duplicate, brass body with brass two nos handle fixed in shutters with screw complete all as specified

S&F for galvanized stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm dia fixed with stainless steel wire staples including beading complete all as specified and as directed .

S & F 1000 ltr capacity three layer white colour rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old water tank all as specified in SSR Part I.

S & F 500 ltr capacity three layer white colour rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old water tank all as specified in SSR Part I I.

Dismantling boarding , any description, fixed in any position with screws complete all as specified

S&F 6mm thick plywood with 5Nos of ply, grade BWR, type BB, fixed with screws to timber frame work etc, complete all as specified.

S&F PVC 18 mm thick PVC celluca ply one side prelam fixed with solvent cement adhesive and screws as in kitchen cabinet complete all as direction of the Engr-in-Charge and the manufacturers specifications and drawings.

S&F factory made PVC kitchen and cupboard frame of the size 75mmx40mm with a wall thickness of 4mm, made out of extruded 4mm thick prelame PVC sheet reinforced with 15mmx15mm MS tube of 19 gauge thickness througout the fame and mitre cut at two corners and jointed with 2 Nos of 150 mm long brackets of 10mmx10mm MS tubes.The door frame shall be fixed to the wall using 65/100mm long MS screw through the frame by using PVC fastners . A minimu of 4 Nos. of screws to be provided for each vertical member and minimum 2 Nos for Horizontal members Complete all as per manufacturers specifications and as directed.

S&F fibre glass Reinforced Plastiic (FRP)door frame shall be three legged of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness .The laminate door frame moulded with fire retardant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs.The frame shall be coverec with fibre glass from all sides . MS stay shal be provided at the bottom to steady the frame .

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as a gap insert for top rail and bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles and nails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at side as per specification and drawings.

Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing.

S&F 150mm long extruded alumiunium alloy handle fabricated type anodized (D type).

S&F 150 mm size aluminium, anodised barrel tower bolts of extruded section and fixed to shutter complete

S&F 100 mm long (size) butt hinges medium weight, cold rolled, mild steel, complete all as specified(Fixing included in item 43 here-in-before).

Taking down chowkats or frames not exc 1.5 Sqm each with shutters (without taking off shutters from the frames).

S&F Powder coated aluminium windows and ventilator fixed having aluminium section weighing 0.55 kg/m including necessary jointing cleat glazing clips rubbers packing anodized including sheet glass 5.5 mm thick complete all as specified.

S&F Powder coated aluminium windows and ventilator shutters, side hung type with sash bars,purposely made for fixing window type air conditioners,exhaust fans etc;aluminium section weighing 0.55 kg/m two nos. of aluminium coated 100 mm long tower bolt,one no. 100 mm long aluminium handle , One no. 150 mm long Aluminium peg stay,two nos aluminium coated 100mm long Hinge ,rubber beading , in each window shutterscomplete all as specified.

S&F powder coated aluminum frame for windows/ventilators with one or more rebates including grills, jointing cleats for fixing etc complete all as specified.

S&F steel windows including pressed steel frame made of 1.25 mm thick MS sheet of size 125x60 mm double rebated with side hung shutter both glaze,gauge and guard bars of 12mm square bars placed horizontally/vertically @ 125mm C/C ,including box type hinges steel handless and peg stay ,tower bolts and including glaze/gauge and guard bars dovetailed or welded ,incl one shop coat of red oxide primer ( wire gause and glass pan shall be measured seperately ). Incl M&L for providing PCC 1:2:4 (12.5mm graded stone aggregate) to fill the frame and making good complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete.

M & L for Non skid 600x600x8 to 10mm thick coloured ceramic tiles(joint less) as in floor over hacking surface of existing floor on 15mm thick screed bed in CM 1:6 including pointing in coloured cement to match the shade of tiles including cutting of existing door shutter at required height. complete all as specified directed by Engr-in-Charge.

M & L for Non skid 600x600x8 to 10mm thick coloured duble charge vetrified tiles(joint less) as in floor over hacking surface of existing floor on 15mm thick screed bed in CM 1:6 including pointing in coloured cement to match the shade of tiles ,complete all as specified and directed by Engr-in-Charge, and approved by GE.

All as per item No 95 above but 10mm thick on rendering surface in CM 1:4 on vertical surfaces of wall as in skirting including taking down of existing skirting on walls complete all as specified directed by Engr-in-Charge.

M& L for Non skid coloured ceramic tiles (300x300x)7 to 8mm thick in floors, etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed for laying floor in CM 1:6 complete all as specified and directed by Engineer in Charge, approved by GE.

M&L for coloured ceramic tiles (300x600mm)x7mm thick on vertical surfaces on skirting dados and risers to steps etc including rendering 10mm thick cement mortar in CM 1:4 ,complete all as specified and directed by Engr-in-Charge.

Taking down existing steel rolling shutter incl hood cover pull & push type, not exc 6.00 sqm area of sides of clear opening and cleaning the sides of shutters suspension shafts, anti-guide channels and gearing all the moving parts rolling shutters and straightening rolling shafts and replacement of bolts and nut as required for smooth functioning of shutters and refixing the same including hood cover complete all as specified and directed.

All as per item No 99 above but gear operated type rolling shutters 3 to 6 sqm but not exc 12 sqm area and incl adjustment of gear assembly complete all as specified and directed by the engr-in-charge.

S&F in repairs Steel rolling shutters with out ball bearing, as specified including tap/cover anchoring rod, harp and staple and one coat of primer, erected in position as indicated complete push, pull or manual type of 1.00 thickness of lath incl prepration of steel suraface and applying two coat of SE our a coat of primer .

M&L for roof treatment as per the description below:- a) Plain cement concrete average 50 mm thick 1:2:4 type B0 (using 12.5 mm graded stone aggrigate )for levelling course for providing slope in the roof @ 1:40 gradient b) Apply bituminous primer @ 0.3 ltr/Sqm (conforming to IS-3384) on prepared surfaces. After drying of primer apply a coat of hot blown 85/25 grade bitumen conforming to (IS-702 @ 1.20 kg/Sqm of prepared surfaces. c) Laying APP (Atatic Polypropylene) modified five layered membrane 3 mm thick and weighing not less than 4 Kg/Sqm with centre core 160 GSM/ Sqm ; core reinforced and laid with 75 mm side overlap and 150 mm end lap. The membrane shall be laid with LPG torch application and overlaps sealed and finished neatly as per the manufacturer specification And apply two coat of silver aluminum paint .

Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in Hard dense Soil complete all as specified.Note; Most of the Excavation will be done manually and no extra cost will be paid to contractor seperately for manual excavation. If any UG Cables, Pipes are damaged during excavation,entire cost for restoration will be borne by the contractor

Excavation in trenches inany type of Hard dense soil not exc 1.5m wide and exc 1.50 mtr but not exc 3.00 mtr in depth for foundation etc and getting out in hard dense soil complete all as specified.Note; Most of the Excavation will be done manually and no extra cost will be paid to contractor seperately for manual excavation. If any UG Cables, Pipes are damaged during excavation,entire cost for restoration will be borne by the contractor

Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose/disintegrated soil or rocks complete all as specified.

Removing excavated material to a distance of 15 kms and depositing where directed .

M&L for cement concrete 1:3:6 type C-2 using 40mm graded aggregates for bedding layers laid (SN8) 180(OD)/163(ID) mm internal dia DWCPE pipes after they are laid and tested complete all as specified (thickness of concrete bed 100 mm).

S&F DWCPE(SN8) 180(OD)/163(ID) mm dia pipes and Snap fit/ Push fit coupler with rubber ring/ gasket for joining incl testing and laid and properly jointed laid in trenches to a level on concrete bed complete all as specified.

S&F DWCPE(SN8) 200(OD)/175(ID) mm dia pipes and Snap fit/ Push fit coupler with rubber ring/ gasket for joining incl testing and laid and properly jointed laid in trenches to a level on concrete bed complete all as specified.

M&L PCC 1 : 4 : 8 type D2 using 40mm graded stone aggregates as in foundation of manholes, posts etc complete all as specified.

M&L for PCC 1 : 2 : 4 type B2 using 20mm graded aggregates as in surfaces channels and drains complete all as specified.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/stoped ends etc complete all as specified.

M&L Providing RCC type B1 20mm graded aggregate 1:2:4 in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces

Demolition and breaking up drain pipes of 100mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar

Demolition and breaking up drain pipes of 150mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar

M&L for providing cement concrete coping with plain fair faces incl chamferes, weathering, throating etc type B1, 1 : 2 : 4 using 20mm graded aggregate and set in CM 1 : 4 complete all as specified.

Supply and fix in replacement of broken cast iron (sand cast) soil, waste and vent pipes in any length, with or without ears, with cement joints, laid in trenches including excavation, returning filling, removal of surplus soil and PCC bedding and haunching in below ground level bore of pipe 100mm complete all as specified and directed.

Supply and fix cast iron Bends (sand cast) (any radius), diminishing pieces or tapers soil/waste pipes 100mm bore with or without duck's foot or heel rest in any length (larger bore measured) complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above GL) and removing out side MD land

Dismantling/ demolition posts or struts embedded in soil or concrete etc (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground.

Dismantling fencing wiremesh, any type

Excavation in post holes (or similar holes) n exc 0.5 cum getting out in any type of soil returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm and covering and removal of surplus soil n exc 50m and making good surface

M&L cement concrete Type B-2 1:2:4 (40mm graded aggregate) as in walls or retaining walls, any thickness, size or shape including pillasters, butresses columns, pillars, boundary pillars and posts (including caps and bases)

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors or fixed on walls 110mm dia fixed in repairs

M&L for providing cement concrete type B-1 1:2:4 (20mm graded aggregate) as in copings

M&L for providing 50 mm thick cement concrete 1:2:4 type B1 (20 mm graded aggregate) as in flooring/subbase.

M&L for providing 100 mm thick cement concrete 1:2:4 type B1 (20 mm graded aggregate) as in hard standing

Forming contraction (Dummy) Joints 65mm deepx10mm wide filled with sealing compound Grade 'A'

M&L Machine pressed precast concrete PU coated colour interlocking paver block any shape and size, with grey cement and pigment confirming to IS 5658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed.

M&L 15 mm thick screed bed or bedding layer for laying floor finishes of tiles CM 1:6 .

S&F Chequered cement concrete PU coated colourtiles 300cm X 300cm x 25mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigments.

Demolition of Brick work of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles

M&L for brick work with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls with old size bricks, built in cement mortar 1:4, complete all as specified.

M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar 1:6, complete all as specified.

All As per item no 134 before but except bricks

Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubing down with water etc complete all as specified and directed

M &L 15mm thick ready mix cement plaster with bulk density 1.4 to 1.70 Kg per ltr, water ration 17 to 19 % by weight with compressive str as per IS 4031 part 6 applied as per the manufactore instr including necessaery cement screed and prepartion of surface to received ready mix plaster. Complete all as specified and directed by Engineer-in-Charge..( (Water proofing compound shall be measured and paid separately)

Supply only integral water proofing admixture of approved quality. (make: Pideilite or equivalent)

M&L preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed

Material and labour for preparation of new plastered surfaces as of walls and applying Two coats of weather proofing exterior acrylic emulsion paint of DULUXWeather shield Max or APEX ULTIMA from Asian paint over one coat of primer from the same manufacturer white lime wash complete all as specified and directed.

M&L for new plaster surface two coat of oil bound destemper over 3mm thick of birla white putty including preparation of newly plastered surface etc all as specified.

Supply, laying and drawing in existing concealed PVC rigid surfaces as per existing surfaces or as directed on walls 02 runs of 4.00 sqmm (Main Cable and neutral) and one run of 4.0 sqmm (as earth wire) of stranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforming to IS : 694 of 1990 complete including connection all as specified and directed.

Supply, laying and drawing in existing concealed PVC rigid surfaces as per existing surfaces or as directed on walls 02 runs of 6.00 sqmm (Main Cable and neutral) and one run of 6.0 sqmm (as earth wire) of stranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforming to IS : 694 of 1990 complete including connection all as specified and directed.

Supply, laying and drawing in existing concealed PVC rigid surfaces as per existing surfaces or as directed on walls 02 runs of 10 sqmm (Main Cable and neutral) and one run of 10 sqmm (as earth wire) of stranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforming to IS : 694 of 1990 complete including connection all as specified and directed.

M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through Existing PVC conduit, including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty and fabricated branded modular metal flush box / M S Steel terminal boxes, concealed in walls with suitable modular inner and outer plate / 3 mm thick laminated top sheet cover for housing switches , socket out let and fan regulators etc , all as specified and as directed for the followings:- complete all as specified and directed by Engineer in charge.

(a) One light/fan point controlled by one way switch

(b) One bell / buzzer point controlled by one bell push

(c) One light point controlled by two Nos two way switches

(d) One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.

(e) One 3 pin 5 Amps socket outlet point controlled by one way switch on same board

All as per item No 145 but point wiring with 4 Sqmm single core copper cable and earth continuity wire with 4 Sqmm single core stranded copper cable for one three pin 15 socket outlet point on independent board complete all as specified and directed by Engineer-in-Charge

S&F 45W High efficient LED Street light fitting with pressure die cast Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie should more than 110lm/W. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<10%, High and low protection along with a surge protection of 4 KV including provision of suitable dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on wall fixed complete as specified and directed.

Notes. (a) Sch A part III is an independent schedule in which M & L, S&F items are to be executed. No labour / item of Sch A part I & sch A part II resp must be overlapped with sch A part III items and vice-a-versa. Any violation of the aforesaid provision noticed by GE/Engineer-in-Charge/JE, the related work done shall not be measured/paid and in addition the penalty of Rs 1500.00 shall be levied and recovered from the contractor dues. (b) To incorporate Gp-I makes only in the subject work. If due to non availabiltiy or any other reasons, the directions of GE/Engr-in-Charge shall be final and binding to incorporate other makes after the sample approval. Any make of sub standard/poor quality shall be replaced immediately and nothing extra shall be admissible on this account. (c) Any M & L, S & F items which are not mentioned under sch A part III and are required to be executed the Sch 'A' notes No 41.02 and 41.03 on CA ser Page No 19) shall be referred regarding procedure of incorporating the same.

imran construction company

AMIT ASSOCIATES

HIND CONSTRUCTIONS

Adhunik Builders

GIAN ENGINEERS

Shivom Projects Private limited