138WE/L-106/2019-20

Amount

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thick above or below ground level complete and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

Hacking out old broken glass any thickness , size, quality or description from wooden/steel frame or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and as directed by the Engineer-in-Charge.

Demolition of precast block work or stonework built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings ,dressed stonework and precast concrete articles and stacking the serviceable materials within 100m and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m complete all as specified and directed.

Dismantling timber scantlings fillets, rails, posts, rafters, purlins, etc, under 40 Sqcm in section, complete all as specified and as directed by Engineer-In-Charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc), or insulation boards/slabs/ blankets, any thickness any type including cover fillets, complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, complete all as specified.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed

Material and Labour for Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed by the Engineer-in-Charge.

Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified, comp and as directed.

Sheet glass 5.5mm thick ordinary quality and glazing with aluminium beeds in square exc 0.50 sqm in each pane, complete all as specified and as directed by the Engineer-in-Charge.

Plain fillets of 2nd class soft wood, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exc 13 sq.cm & not exc 25 sq.cm, complete all as specified & directed.

Decorative type, cover fillets of teak wood , 3mm thick, 30mm wide, and fixing with nail, complete all as specified and directed.

6mm thick, veneered decorative plywood, (05 Nos of ply) grade 1 (with BWR resin) with decorative face veneers on one face; fixed with nails to timber frame work in ceiling, flat or sloping complete all as specified and directed.

6mm thick, veneered decorative plywood, (05 Nos of ply) grade 1 (with BWR resin) with decorative face veneers on one face; fixed with nails to timber frame work in wall complete all as specified and directed.

French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats, complete all as specified.

Wooden laminated texture flooring in planks having unique glue use click system fixed over 3mm foam sheet complete all as per manufacture instruction , complete all as specified.

Precast cement concrete block, M-10(1:3:6), type C-1, (using 20mm graded crushed stone aggregate) masonry with solid blocks exceeding 10 Cm in width and setting in cement mortar 1:6, complete all as specified and as directed.

Rendering 15 mm thick, on other than fair faces of brick work or concrete surfaces, in cement mortar 1:4 rendering is to be finished even and smooth (without using extra cement), complete all as specified and as directed.

Preparation of new plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

75 mm thick plain cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregates) as in plinth protection/path, finished even and fair including cutting grooves at every 3.00 metre and filled with bitumastic complete all as specified and directed.

Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

Expanded metal, weight per sqm not exceeding 4kg, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed.

Rolled mild steel work as in main and cross beams, hips and jack rafter, purlins where connected to common rafters and running rails and guides for sliding doors ,fixed with angle cleats or other connecting plates conforming to Fe 410-W (Gde E-250) quality-A complete all as specified and directed.

0.63 mm thick CGI sheeting with nominal grade of zinc coating 120 gms per sqm with two corrugation side lap fixed with 'J' or 'L ' hooks as in roof covering,walls etc complete all as specified and directed.

All as per srl item no 26.00 but except sheet with two corrugation side lap fixed with 'J' or 'L ' hooks as in roof covering, walls etc complete all as specified and directed.

0.80 mm thick plain, galvanised, mild steel sheeting as in ridges, hipe, valley gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 120 gms per sqm complete all as specified and directed.

Preparation of old painted steel surface of any description and applying two coats of synthetic enamel paint all as specified and directed.

Preparing zinc or galvanised surfaces to receive painting by coating with mordant or approved solution including washing and cleaning etc;and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description, not other wise described over 10 cm width or girth complete.

Steel rolling shutter having lath thickness 1.25 mm with ball bearing but gear operated type with bevel gear box and crank handle including top cover and anchoring rod, hasp and staple including safety lever locks, ball bearing for rolling shutter and one coat of red oxide primer, erected in position complete all as specified and directed .

Taking down carefully aluminium / copper point wiring light/fan/socket or power complete including unscrewing from board fitting and fixture such as switches, sockets, ceiling roses, lamp holders, brackets, pendent holder , light fittings , regulators, distribution/ Meter boards, MCBs etc and making good the distturbed surface matching with existing specifications complete all as specified and directed.

Point wiring for one light point or fan point controlled by one switch with 1.50 Sqmm, PVC insulated, unsheathed, FRLS single core, multi-stranded, copper conductor cable, 1100 Volts fire resistance ISI, drawn in and including PVC casing and capping, fire resistance, ISI marked, fixed surfaces of walls and ceilings, terminated in and including rectangular PVC board for mounting fitting/ switches/ sockets and 1.50 Sqmm, copper conductor, multi-stranded, FRLS as earth continuity wire connected to earth terminal, including making good to disturbed surface as matching to existing descriptions/ specifications, complete all as specified and as directed.

Description all as per serial item No- 33.00 here-in-before but for one 5 Amps socket outlet on same board, complete all as specified and as directed.

Description all as per serial item No- 33.00 here-in-before but for one 5 Amps socket outlet on independent board, complete all as specified and as directed.

Point wiring for 3-pin, 15 Amps, socket outlet on independent board with 4 Sqmm, PVC insulated, unsheathed, FRLS single core, multi-stranded, copper conductor cable, 1100 Volts, drawn in and including PVC casing and capping, fire resistance, ISI marked, fixed surfaces of walls and ceilings, terminated in and including rectangular PVC board for mounting fitting/ switches/ sockets and 2.50 Sqmm, copper conductor, multi-stranded, FRLS as earth continuity wire connected to earth terminal, including making good to disturbed surface as matching to existing descriptions/ specifications, complete all as specified and as directed.

Switch piano, flush type, single pole, one way, 5 Amps, 240 volts complete all as specified and as directed.

Socket outlet, 2-in-1, 5 pin, 5 Amps, flush type, complete all as specified and as directed.

Switch piano, flush type, single pole, one way, 15 Amps, 240 volts complete all as specified and as directed.

Socket 2-in-1, 5/6-pin, 5/ 15 Amps, flush type, complete all as specified and as directed.

Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings,with & including 15 watt LED lamp complete all as specified and as directed.

Ceiling rose, surface bakelite 65 x 50 mm three terminals complete all as specified and directed.

Supply & fixing in replacement MCCB 200Amps, 4 pole, 415 volts, 25 KA breaking capacity with thermal- magnetic adjustable setting complete all as specified and directed. Make :- L &T, Legrand, Havells.

Supply & fixing in replacement MCB, SPN, 63Amps, 10KA breaking capacity with overload and short circuit protection complete all as specified and directed. Make :- L &T, Legrand, Havells.

Supply & fixing in replacement MCB, SPN, 40Amps, 10KA breaking capacity with overload and short circuit protection complete all as specified and directed. Make :- L &T, Legrand, Havells.

Supply & fixing in replacement MCB, SP, 6 to 32Amps, 10KA breaking capacity with overload and short circuit protection complete all as specified and directed. Make :- L &T, Legrand, Havells.

Supply & fixing in replacement of vertical distribution board, double door, suitable for 'A' frame FP MCCB 200A made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK protection , TPN 12 way , 415V with bas bar rating 300 Amps, dust and vermin proof, suitable for incorporation of MCBs and MCCB etc and making all necessary connnections, duly flush on wall surface, complete all as specified and directed. Make : Havells cat part No:-DHDLVDRWGOFO12/or equivalent in Legrand /L&T/ Siemens/ C&S Note:- MCCB and MCB shall be measured and paid separately under respective items.

Supply & fixing in replacement of distribution board, double door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK protection , SPN 08 way , 240V with bas bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCBs and isolators etc and making all necessary connnections, duly flush on wall surface, complete all as specified and directed. Make : Havells cat part No:-DHDMSHODDW08 or equivalent in Legrand /L&T/ Siemens/ C&S

Energy efficient round recessed mounted polycarbonate fixture flat panel 12W LED 6000K down lighter with premium white powder coating and die cast aluminium and making necessary electric connection, complete all as specified and directed. Make : Havells / Wipro / Bajaj /Crompton Greaves

Recess mounting LED light fitting 36 Watt including separate electronic driver & high brightness SMD LEDs ultra modern suitable for armstrong/grid/POP ceiling in MS housing with high brightness 4000K LED sutable for 230 Volts 50 HZ diffused type optics 600mm x 600mm in size complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and directed . Make: Havells cat part No:-PLR28/36WLED857MOD or equivalent in Bajaj/ Crompton Greaves/ Philips/ Wipro/GE.

1 x 20W LED, tube light fitting mounted on integrated sleek extruded polycarbonate LED channel with white acrylic cover suitable for 230 volt 50 Hz ,cool white colour, bipin holder, connector block etc complete will all accessorized internally prewired alongwith tube rod 20W LED and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed . Make: Havells cat part No:-STOUTPLUS600BS20WLED840SPCWH or equivalent in Bajaj/ Crompton Greaves/ Philips/ Wipro/GE.

15 Watts LED, 230 volts,50 HZ AC, bulk head fitting complete with all accessorized internally prewired alongwith 15W LED and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete including taking down existing unservicable light fitting complete all as specified and directed. Make: Havells cat part No:-LHEXCGP7PN5W015 or equivalent in Bajaj/ Crompton Greaves/ Philips/ Wipro/GE.

Sub main wiring for circuit/ submain wiring alongwith earth wire with two run of 6.0 Sqmm of fire resistance, PVC insulated copper conductor, single core cable, multi stranded, FRLS, ISI marked, 1100 Volts grade and one run of 4 Sqmm, FRLS, PVC insulated copper conductor, single core cable, multi stranded, ISI marked, 1100 Volts grade as earth wire connected to earth terminal, drawn in and including PVC casing and capping, fire resistance, ISI marked, fixed on surfaces of walls/ ceilings, including making good to disturbed surface matching to existing descriptions/ specifications, complete all as specified and directed.

Sub main wiring for circuit/ submain wiring alongwith earth wire with two run of 4.0 Sqmm of fire resistance, PVC insulated copper conductor, single core cable, multi stranded, FRLS, ISI marked, 1100 Volts grade and one run of 2.5 Sqmm, FRLS, PVC insulated copper conductor, single core cable, multi stranded, ISI marked, 1100 Volts grade as earth wire connected to earth terminal, drawn in and including PVC casing and capping, fire resistance, ISI marked, fixed on surfaces of walls/ ceilings, including making good to disturbed surface matching to existing descriptions/ specifications, complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 600x600x6mm buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of earth plate not less than 1.5mtr below normal ground level, connected with galvanized iron wire 4.0mm dia as earth lead means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 15 mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15, type B-1 in pit with precast RCC M-15(1:2:4), type B-1(using 20mm graded crushed stone aggregates) in cover reinforced with XPM not less than 4.0 Kg per Sqm, test point etc. all as shown in electric plate No-3 of SSR Part-I (2009), complete with necessary earth work in any type of soil, removal to a distance not exceeding 50mtr, including testing on completion, complete all as specified and as directed. Note: The cost of excavation and earth work, PCC pit and pit covers, funnel and watering pipe, wire mesh, charcoal dust and common salt, 15mm dia, medium grade, GI pipe as protection to earth lead and earth lead as 4.0mm dia GI wire (main earthing lead from earth electrode to test point length not less than 7.5mtrs) shall be deemed included in the unit rate for earthing.

M/S Web Company

M/S TRADE LINK