Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.9 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹24.6 L+₹2.4 L (10.6%)Rejected-Finance 430 D DEFENCE COLONY JAJMAU KANPUR 208010 | KANPUR | KANPUR NAGAR | UTTAR PRADESH | 208010 | L2 | Rejected-Finance Other than Lowest bidder | |
| 3 | L3₹29.4 L+₹7.2 L (32.4%)Rejected-Finance | L3 | Rejected-Finance Other than Lowest bidder |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
26 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(AF) B/R Chakeri Kanpur
GE(AF) B/R Chakeri Kanpur
REPAIR TO WOODEN STEEL ALUMINIUM JOINERY AND CONNECTED WORKS AT 7 AFH KANPUR CANTT
2022_MES_520190_1
GE(AF)/CHK/T-02 OF 2022-23
Open Tender
Civil Works
Works
270 days
7AFH Kanpur Cantt
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE(AF) B/R Chakeri Kanpur
₹60,000
16 Jun 2022
26 Apr 2022
2 Jun 2022
26 Apr 2022
26 May 2022
11 May 2022
60 days
Amount
Taking down chowkhats or frames not exceeding 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed.
Ditto all as per item No. 1.00 but exceeding 1.5 sqm and not exceeding 4 sqm each.
Taking down shutters of any description not exceeding 1.0 sqm each complete all as specified and as directed.
Ditto all as per item No 3 but exceeding 1.0 sqm and not exceeding 2.0 sqm each.
M&L for second class hardwood plain solid straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered edge put together with glue pinned at joints complete all as specified and as directed.
M&L for 35 mm thick factory made second class hardwood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc with sash bar any number fitted with cut and mitered beads for securing glass gauze etc , sizes of members of shutters as specified in SSR Part I section 8, Section 8.24(a) and fitted to chowkats complete all as specified and as directed.
Ditto all as per item No 6 but 30 mm thick for window, ventilators etc, are provided with stiles and rails as specified in SSR part-I, section 8 clause 24(b).
Ditto all as per item No 6 but 30 mm thick for window, ventilators etc are provided with stiles and rails as specified in SSR part-I, section 8 clause 24(b) but without sash bars.
S&F 30 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete, all as specified and directed.
Ditto all as per item No 9 here-in before but 25 mm thick flush shutters.
S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5mm thick wood grain printed PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed.
M&L for factory made solid PVC moulded door shutter with particle board 28 to 30 mm thick (stiles) with 2,4, or 6 raised panel design with 5mm thick Moulded prelam PVC sheet on the front face & 5mm plain colour PVC prelam sheet on back face complete all as specified and directed.
Taking down easing and adjusting wooden shutters of any description not exceeding 1 sqm each refixing in same opening, complete all as specified and as directed.
Ditto all as per items 13, here-in-before, but exceeding 1.0 sqm and not exceeding 2.0 sqm each refixing in same opening.
S&F GI wire cloth of size 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in repairs MS galvanized wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, all as specified and directed.
S&F butt hinges medium weight cold rolled mild steel 100 mm long complete all as specified and directed.
Ditto all as per Item No 17 here-in-before but 75 mm long stainless steel for PVC door complete all as specified and as directed.
S&F aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed.
Ditto all as per Item No 19 here-in-before but for 200 mm long.
S&F 300 mm long Aluminum anodized sliding door bolts with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
Ditto all as per item No 21 above but for 250 mm long.
S&F Aluminum anodised bow handle fabricated type extruded section of 125mm long complete all as specified and directed.
Ditto all as per item No 23 here-in-before but for 150 mm long.
S&F in repair 250 mm size mild steel door springs complete all as specified and directed.
Hacking out old broken glass (any thickness size quality or description) from wooden frames etc glazed with putty or fixed with beads, all as specified and directed.
Ditto all as per item No 26 above but from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.
S&F sheet glass 3 mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.
S&F 3 mm thick figured glass pin head type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.
S&F in repair tinted glass 5 mm thick exceeding 0.5 Sqm in each pane complete all as specified.
M&L for PCC (1:3:6) type B1 using 20 mm graded stone aggregate for hold fasts finished to match with the surrounding surfaces including necessary form work complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description exec 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for framed work such as grills with end bars shoulders/framed guard bars and similar work conforming to Fe-410 or 310 complete all as specified and directed.
M&L for Mild steel small articles such as flat iron of size 25 mm x 3 mm for hold fasts etc conforming to Fe 410-0, or 310-0 complete all as specified and directed.
Taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick or stone masonary in CM (1:4) finished even and even without using extra cement and applying two coat of oil bound distemper over a coat of cement base after preparation of surfaces over and including 3 mm thick wall care putty complete all as specified and as directed.
M&L for rendering 15 mm thick on fair faces of brick or stone masonary in CM (1:6) finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of new undecorated surfaces of walls and applying two coat of cement based paint over a coat of cement base primer complete all as specified and directed.
M&L for preparation surface of wall and applying three coats of white wash complete all as specified and directed.
S&F in repairs butt hinges medium weight cold rolled mild steel 100 mm long, complete all as specified and directed.
S&F in repairs Butt hinge medium weight cold rolled mild steel 75 mm long, complete all as specified and directed.
S&F in repairs aluminium anodized bow handle fabricated type, extruded section of 150mm long, complete all as specified and directed.
S&F in repairs aluminium anodized barrel tower bolt of extruded section 200 mm long complete all as specified and directed.
S&F in repair 250 mm long aluminum anodized sliding door bolts with hasp and staple (bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
S&F in repairs mortice lock brass 4 levers vertical type of size 100mm complete all as specified and directed.
S&F in repair 150 mm over all length of cover plate of floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed.
S&F in repairs aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed..
S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.
Dismantling mild steel windows and ventilators of any description complete all as specified and directed.
S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, devetailed or welded complete all as specified and directed.
Ditto all as per item No 51 above but without glazing bars complete.
S&F steel ventilators with top hung shutters including hinges, steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
Taking down aluminum shutters including repair for smooth functioning including repair/replacement of aluminum snap beading, glazing clips, rubber neoprene packing of any description not exceeding 1 sqm each and refixing in same opening complete all as specified and directed.
Ditto all as per items 54 above but exceeding 1.0 sqm and not exceeding 2.0 sqm each complete all as specified and directed.
Taking down rolling shutter of any size including covering guide, channel etc complete all as specified and directed.
S&F steel rolling shutter without ball bearing as specified including top cover, anchoring rod, hasp and staple and shop coat of primer, erected in position as indicated complete push/ pull or manual type, thickness of lath 1.25 mm, complete all as specified and directed.
Repair to existing rolling shutters of any thickness making functional of by repairing ball bearing, top cover, anchoring rod roller correcting/straitening of side guide rail etc with and including necessary repairing push/ pull or manual type easing rails after greasing complete all as specified and directed. (Note: Spares such as ball bearings, springs etc will be measured and paid separately under respective item of Sch 'A' given here-in-after as supply only.).
Supply only ball bearing for rolling shutter
Supply only springs for rolling shutter
M&L for cutting holes into or through cement concrete slabs etc, reinforcement or otherwise for inserting hold fast, superficial area exc 250 Sqcm but not exceeding 500 Sqcm and 15 cm depth complete all as specified and directed.
S&F for framed doors or gates of mild steel angles or other sections with gusset plates, rails, braces etc., complete drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing of Fe-410W(Gde-E-250) quality 'A', complete all as specified and directed.
Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheets in roof coverings complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness including (Nainital or similar) pattern roof covering complete all as specified and directed.
S&F 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified & directed.
S&F 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified & directed.
S&F 1.00 mm thick plain, galvanised mild steel sheeting, in steel gates, ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.
S&F in repairs 2.0 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.
M&L for preparation of new surfaces of steel and iron of any description not exceeding 10cm in width or girth when unconnected with other painting and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.
M&L for preparation of new surfaces of steel and iron of any description over 10cm in width or girth not otherwise described, and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.
Demolition of brick work / stone masonry built in cement mortar complete all as specified and directed.
M&L for brick work with fly ash bricks old size, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and directed.
M&L brick work except bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.
M&L for PCC (1:3:6) type C-1 using 20 mm graded stone aggregate in copings, plinth courses, string courses and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.
S&F mild steel wind ties for roof including securing bolts, posts including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. Note:- Wind tie shall not be provided over GI sheet & Galvalume sheet.
S&F in repairs steel window handles fixed with nuts & bolts, screw or welded complete all as specified and directed.
S&F in repairs steel window peg stay with nuts & bolts, screw or welded complete all as specified and directed.
S&F 2nd class HW plain fillets, square, rectangular in section, clean sawn, secured with nails or brads, sectional area exc 3 & n.exc 6 sqcm, all as specified and directed.
S&F 2nd class HW plain fillets, square, rectangular in section, clean sawn, secured with nails or brads, sectional area exc 13 & n.exc 25 sqcm, all as specified and directed.
Dismantling of wall and ceiling/cup boards (fibre, pulp, insulation, etc) or insulation boards/slabs, blankets, any thickness, including cover fillets, fixed in any position complete all as specified and directed.
S&F 19 mm thick prelaminated particle board, interior grade with both side decorative choice lamination fixed with screw to timber frame work as in shelves , Cup board shutter etc with all around lipping complete all as specified and directed.
S&F 30 mm wide continuous (piano) hinges, mild steel, bright finish or electrogalvanised, complete all as specified and directed.
M&L for 15 to 16 mm thick and size 600mmx600 mm mineral fibre board false ceiling system of pattern classic lite RH 99 (bevelled tegular) of approved make and model (approved by GE in writting) including grid system using hot dipped galvanised steel section, exposed surface with pre-powder coated capping, main runner and cross runner and to comprise main tee/runner of size 15 mm x 38 mm (load carring capacity 14 kg/sqm) spaced @ 1200 mm centre to centre securely fixed to the structural soffit and flush fitting 1200 mm long cross tee/runner to be interlocked between main runners @ 600 mm centre to centre from 1200 mm x 600 mm module, cut sub-cross tee/runner 600 mm require independent support. Wall angle of size 19 mm x 19 mm, secured to the periphery of the wall at 450 mm maximum from centres. The above grid is suspended at every 1200 mm centre to centre in both direction and starting from wall at the distance 350 mm from wall by using 3.50 mm dia aquiline wire with suitable fasteners and hook, clips complete all as specified and directed.
S&F aluminium frame/shutter any colour, powder coated for doors/windows/ventilators/partition, including necessary joining cleat, glazing clips, rubber reoprene packing, handles 2 Nos in each doors/windows/vent, hinges 150 mm size for door and 100 mm size for window/vent , anodized aluminium snap boarding screws etc complete all as specified. Note : (i) Any other section required for doors/ windows/vent/ Partion will paid as per actual wt at Site. (ii) Glass/wire mesh, and other fittings material shall be measured and paid seperately under respective items of Sch 'A' given here-in-after.
S & F powder coated aluminium grill to windows/ventilators including aluminium 'F' Channel havind size 20 mm x 20 mm x 2 mm mm thick, fixed all round of grill complete all as specified and directed.
M&L for 12 mm thick pre-leminated particle board exterior grade prelaminated both side with decorated choice laminationand fixed with rubber packeng/gasket screws complete all as specified and directed.
S & F for 5.5 mm thick sheet glass, exc 0.50 Sqm in each pane, fixed to aluminium frame work with necessary glazing cips/rubber packeng/gasket screws etc complete all as specifed and as directed.
S&F 12 mm thick pre-laminated particle board, interior grade, prelaminated both sides with decorative choice laminations fixed with screws of any position complete, all as specified and directed.
S&F 75 mm long fancy type metallic handle with wooden finish to match with decorative lamination complete all as specified and directed.
S&F magnetic catcher as per sample approved by GE, complete all as specified and directed.
S&F in repairs 150 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extracted section or cast aluminum alloy and fixed complete, all as specified and directed.
S&F rubber beading 75 mm wide fixing with nail/screw, complete all as specified and directed.
M&L for factory made uPVC white colour sliding windows, area not exceeding 2.00 Sqm each three track made of extruded profiles with wall thickness of 2.3 mm (plus or minus 0.2 mm). Window profile with hollow sections with multi chamber, frame (88 mm x 52 mm), sliding sash (42 mm x 67 mm), sliding mesh sash (42 mm x 57 mm), sliding interlock (one vertical lenght in each shutters) (45 mm x 28 mm), glazing bead (24.5 mm x 16 mm) will be mitered cut and fusion welded at all fusion welded at all corners, including railing of holes for fixing of hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket, 1.2 plus or minius 5 mm thick galvanized steel frame (30 mm x 18 mm) 2 Nos, sliding sash (30 mm x 18 mm), sliding mesh sash (26 mm x 10 mm), profile to be inserted in required profile and will be fixed to the wall with 8 mm x 100 mm long fasterners complete all as specified and directed.. Hardware : Touch lock of zinc alloyed (white powder coated), steel roller system, stainless wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories) (Note : The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpuse).
JOG CONSTRUCTION
Khalil Ahmed and Sons
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .