Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.5 LAccepted-AOC SUBAN BAZAAR DIGLIPUR NORTH ANDAMAN 744202 | DIGLIPUR | NORTH ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744202 | L1 | Accepted-AOC L1 | |
| 2 | L2₹8.1 L+₹51,992 (6.83%)Rejected-Finance | L2 | Rejected-Finance Not L1 | |
| 3 | L3₹8.2 L+₹61,051 (8.02%)Rejected-Finance NO 353 DIGLIPUR 1 DIGLIPUR NORTH MIDDLE ANDAMAN 744 202 | NORTH AND MIDDLE ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744202 | L3 | Rejected-Finance Not L1 | |
| 4 | L4₹8.2 L+₹62,275 (8.19%)Rejected-Finance NEAR OLD CCS JUNGLIGHAT SRI VIJAYA PURAM 744 103 | SRI VIJAYA PURAM | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L4 | Rejected-Finance Not L1 |
Tender Value
₹8.3 L
EMD Value
₹16,500
Closing Date
30 Sept 2021, 6:00 pmClosed
GARRISON ENGINEER SOUTH DIGLIPUR
Garrison Engineer (South) Diglipur Military Engineer Services Aerial Bay, Diglipur North Andaman - 744 202
REPAIR TO CERTAIN FURNITURE INCLUDING POLISHING, PAINTING AT DIGLIPUR AND MAYABUNDER UNDER GE (SOUTH) DIGLIPUR
2021_MES_472903_1
8850/E8
Open Tender
Miscellaneous Works
Item Rate
270 days
Diglipur
ALL BIDDERS ENLISTED WITH MES IN CLASS E AND CAT di AND UNENLISTED BIDDERS MEET MES ENLISTMENT CRETERIA OF CLASS E AND CAT di REFER NIT
6 documents required · 6 mandatory
₹500
GARRISON ENGINEER SOUTH DIGLIPUR
₹16,500
Yes
10 May 2022
4 Sept 2021
2 Oct 2021
4 Sept 2021
30 Sept 2021
18 Sept 2021
6 Sept 2021 - 10 Sept 2021
Amount
PART-I : REPAIRS TO WOODEN FURNITURE M&L for new components 1st class teak wood (from mainland or Paduak of A&N Island) as per the required sizes mentioned in the drawings and including dismantling of unserviceable components or borer eaten parts of following furniture items carefully without disturbing the adjoining parts. All joints to be fixed with bamboo pins, wooden screws, Fevicol and wooden putty wherever required on completion of repair. After repair, fill uneven surfaces with Bee-wax at the site as per directed by Engr-in-charge. Chair dining (FD-279) Rear leg (Size 30 mm x 55 mm x 890 mm)
Description all as per item No. 1 above, but Front leg (size 30 mm x 65 mm x 460 mm)
Description all as per item No. 1 above, but Seat side rail (size 30 mm x 65 mm x 430 mm) including drilling of holes @ 12.5mm C/C for canning
Description all as per item No. 1 above, but Front rail (size 30 mm x 65 mm x 440 mm) including drilling of holes @ 12.5mm C/C for canning
Description all as per item No. 1 above, but Rear rail (size 30 mm x 65 mm x 405 mm) including drilling of holes @ 12.5mm C/C for canning
Description all as per item No. 1 above, but Side stiffener (size 20 mm x 25 mm x 430 mm)
Description all as per item No. 1 above, but Center stiffener (size 25 mm x 20 mm x 440 mm)
Description all as per item No. 1 above, but Back rest 45 mm x 15 mm curved out of size 45 mm x 35 mm x 405 mm
M&L for new cane with approved plastic cane of 2.00 mm wide, 0.50 mm thickness half-round as per Godrej pattern and providing 4 mm wide half-round border all around after polish work as shown in the drawing, including removing worn out unserviceable cane from furnitures. Chair dining (FD-279)
M&L for new components 1st class teak wood (from mainland or Paduak of A&N Island) as per the required sizes mentioned in the drawings and including dismantling of unserviceable components or borer eaten parts of following furniture items carefully without disturbing the adjoining parts. All joints to be fixed with bamboo pins, wooden screws, Fevicol and wooden putty wherever required on completion of repair. After repair, fill uneven surfaces with Bee-wax at the site as per directed by Engr-in-charge. Chair easy (FD-229) Rear leg (size 55 mm x 25 mm x 490 mm)
Description all as per item No. 10 above, but Front leg (size 55 mm x 25 mm x 545 mm)
Description all as per item No. 10 above, but Seat side rail (size 70 mm x 40 mm x 575 mm) including drilling of holes @ 12.5mm C/C for canning
Description all as per item No. 10 above, but Seat front rail (size 55 mm x 25 mm x 510 mm) including drilling of holes @ 12.5mm C/C for canning
Description all as per item No. 10 above, but Seat rear rail (size 50 mm x 25 mm x 480 mm) including drilling of holes @ 12.5mm C/C for canning
Description all as per item No. 10 above, but Back frame (size 55 mm x 20 mm x 480 mm) including drilling of holes @ 12.5mm C/C for canning
Description all as per item No. 10 above, but Back bottom frame (size 55 mm x 40 mm x 480 mm) including drilling of holes @ 12.5mm C/C for canning
Description all as per item No. 10 above, but Back side frame (size 70 mm x 25 mm x 440 mm)
Description all as per item No. 10 above, but Wooden member (size 20 mm x 15 mm x 440 mm) screwed to side frame
Description all as per item No. 10 above, but Arm rest (size 65 mm x 25 mm x 610 mm)
Description all as per item No. 10 above, but Front / back base stiffener (size 50 mm x 25 mm x 510 mm)
M&L for new cane with approved plastic cane of 2 mm wide, 0.50 mm thickness half-round as per Godrej pattern and providing 4 mm wide half-round border all around as shown in the drawing after polish work, including removing worn out unserviceable cane from seat of furnitures. Chair easy (FD-229)
M&L for new cane with approved plastic cane of 2 mm wide, 0.50 mm thickness half-round as per Godrej pattern and providing 4 mm wide half-round border all around as shown in the drawing after polish work, including removing worn out unserviceable cane from back of furnitures. Chair easy (FD-229)
M&L for new components 1st class teak wood (from mainland or Paduak of A&N Island) as per the required sizes mentioned in the drawings and including dismantling of unserviceable components or borer eaten parts of following furniture items carefully without disturbing the adjoining parts. All joints to be fixed with bamboo pins, wooden screws, Fevicol and wooden putty wherever required on completion of repair. After repair, fill uneven surfaces with Bee-wax at the site as per directed by Engr-in-charge. Teapoy (FD-278) Leg (size 60 mm x 30 mm x 540 mm)
Description all as per item No. 23 above, but Top rail (size 50 mm x 20 mm x 600 mm)
Description all as per item No. 23 above, but Bottom rail (size 50 mm x 20 mm x 450 mm)
M&L for 18 mm thick prelaminated particle board exterior grade (OST) by fixing with screws on existing frame and tightening all loose components properly and providing 4 mm thick teak wood beading and apply one coat of french polish to beading of the tables for obtaining glossy finish at the site, including taking down old worn out table top as directed by Engr-in-charge. Teapoy (FD-278)
M&L for new components 1st class teak wood (from mainland or Paduak of A&N Island) as per the required sizes mentioned in the drawings and including dismantling of unserviceable components or borer eaten parts of following furniture items carefully without disturbing the adjoining parts. All joints to be fixed with bamboo pins, wooden screws, Fevicol and wooden putty wherever required on completion of repair. After repair, fill uneven surfaces with Bee-wax at the site as per directed by Engr-in-charge. Table dining 6 persons (FD-273) Leg (size 75 mm x 40 mm x 760 mm)
Description all as per item No. 27 above, but middle stiffener (size 100 mm x 25 mm x 900 mm)
Description all as per item No. 27 above, but top long rail (size 100 mm x 25 mm x 1500 mm)
Description all as per item No. 27 above, but top short rail (size 100 mm x 25 mm x 900 mm)
M&L for 18 mm thick prelaminated particle board exterior grade (OST) by fixing with screws on existing frame and tightening all loose components properly and providing 4 mm thick teak wood beading and apply one coat of french polish to beading of the tables for obtaining glossy finish at the site, including taking down old worn out table top as directed by Engr-in-charge. Table dining 6 persons (FD-273)
M&L for new components 1st class teak wood (from mainland or Paduak of A&N Island) as per the required sizes mentioned in the drawings and including dismantling of unserviceable components or borer eaten parts of following furniture items carefully without disturbing the adjoining parts. All joints to be fixed with bamboo pins, wooden screws, Fevicol and wooden putty wherever required on completion of repair. After repair, fill uneven surfaces with Bee-wax at the site as per directed by Engr-in-charge. Table centre (FD-274) Leg (size 60 mm x 30 mm x 400 mm)
Description all as per item No. 32 above, but bottom stiffener (size 50 mm x 20 mm x 450 mm)
Description all as per item No. 32 above, but top long rail (size 20 mm x 50 mm x 900 mm)
Description all as per item No. 32 above, but top short rail (size 20 mm x 50 mm x 450 mm)
M&L for 18 mm thick prelaminated particle board exterior grade (OST) by fixing with screws on existing frame and tightening all loose components properly and providing 4 mm thick teak wood beading and apply one coat of french polish to beading of the tables for obtaining glossy finish at the site, including taking down old worn out table top as directed by Engr-in-charge. Table centre (FD-274)
M&L for new components 1st class teak wood (from mainland or Paduak of A&N Island) as per the required sizes mentioned in the drawings and including dismantling of unserviceable components or borer eaten parts of following furniture items carefully without disturbing the adjoining parts. All joints to be fixed with bamboo pins, wooden screws, Fevicol and wooden putty wherever required on completion of repair. After repair, fill uneven surfaces with Bee-wax at the site as per directed by Engr-in-charge. Table writing (FD-275) Leg (size 50 mm x 35 mm x 760 mm)
Description all as per item No. 37 above, but center stiffener (size 50 mm x 25 mm x 1145 mm)
Description all as per item No. 37 above, but side stiffener (size 20 mm x 50 mm x 600 mm)
S&F piano hinge for shutter of Table writing (FD-275)
S&F 18 mm thick OST prelaminated board for door shutter with teak wood beading of Table writing (FD-275).
S&F 6 mm thick plywood for base of drawer of Table writing (FD-275).
S&F 12 mm thick teak wood side plank for drawer of Table writing (FD-275).
M&L for 18 mm thick prelaminated particle board exterior grade (OST) by fixing with screws on existing frame and tightening all loose components properly and providing 4 mm thick teak wood beading and apply one coat of french polish to beading of the tables for obtaining glossy finish at the site, including taking down old worn out table top as directed by Engr-in-charge. Table writing (FD-275)
M&L for new components 1st class teak wood (from mainland or Paduak of A&N Island) as per the required sizes mentioned in the drawings and including dismantling of unserviceable components or borer eaten parts of following furniture items carefully without disturbing the adjoining parts. All joints to be fixed with bamboo pins, wooden screws, Fevicol and wooden putty wherever required on completion of repair. After repair, fill uneven surfaces with Bee-wax at the site as per directed by Engr-in-charge. Table 900x600 mm with drawer (FD-283) Leg (size 60 mm x 30 mm x 760 mm)
S&F 12 mm thick x 100 mm teak wood side plank for drawer of Table 900x600 mm with drawer (FD-283)
S&F 6 mm thick plywood for base of drawer of size 600 x 300 mm of Table 900x600 mm with drawer (FD-283)
Description all as per item No. 45 above, but for bottom rail (size 20 mm x 60 mm x 600 mm)
Description all as per item No. 45 above, but for top horizontal rail (size 20 mm x 110 mm x 900 mm)
Description all as per item No. 45 above, but for top vertical rail (size 20 mm x 110 mm x 600 mm)
M&L for 18 mm thick prelaminated particle board exterior grade (OST) by fixing with screws on existing frame and tightening all loose components properly and providing 4 mm thick teak wood beading and apply one coat of french polish to beading of the tables for obtaining glossy finish at the site, including taking down old worn out table top as directed by Engr-in-charge. Table 900x600 mm with drawer (FD-283)
PART- II : POLISHING & PRESERVATION M&L for preparation for scrapping of following wooden furnitures by all means with abrasive paper and filling the gaps or depressed surfaces with BEE wax and making the surfaces smooth, and thereafter apply Teak wood coats of French polish to a glossy finish and as directed by the Engineer-in-charge. Work will be executed where furniture exist at different locations under jurisdiction of GE (South) Diglipur. Chair Dining FD-279/357
Description all as per item No. 52 above, but Chair easy FD-227/ 358
Description all as per item No. 52 above, but Chair writing (all patterns) FD-280
Description all as per item No. 52 above, but Sofa set 5 seater (3+1+1) FD-281/ 373
Description all as per item No. 52 above, but Table dining for 6 persons FD-273
Description all as per item No. 52 above, but Table Centre FD-274
Description all as per item No. 52 above, but Table writing FD-249
Description all as per item No. 52 above, but Table dressing ladies FD-378
Description all as per item No. 52 above, but Teapoy FD-278
Description all as per item No. 52 above, but Locker bedside wooden (both internal and external) FD-54
Description all as per item No. 52 above, but Sofa set 2 seater FD-373
PART-III : REPAIRS TO STEEL FURNITURE M&L for new components as mentioned in the drawing, including dismantling unserviceable components carefully without disturbing the adjoining parts complete as directed by Engr-in-charge. Chair verandah (MAP) (FD/E6/MAP/11) Remove the broken seat and Supply and fix approved make new PVC seat cover.
Description all as per item No. 63 above, but Remove the broken back and Supply and fix approved make new PVC back cover
Description all as per item No. 63 above, but S&F PVC hard shoe cap, duly removing worn-out one PVC hard shoe cap
Description all as per item No. 63 above, but M&L for smooth the lateral surface of chair with machine paper and paint chair with white enamel paint
M&L for with new components as mentioned in the drawing, including dismantling unserviceable components and worn out cane carefully without disturbing the adjoining parts complete as directed by Engr-in-charge. Chair verandah (ALU) (FD-259) Remove the worn out cane and Supply and fix approved make new PVC seat cover.
Description all as per item No. 67 above, but Remove the worn out cane and Supply and fix approved make new PVC back cover.
Description all as per item No. 67 above, but S&F PVC hard shoe cap, duly removing worn-out one PVC hard shoe cap.
Description all as per item No. 67 above, but M&L for smooth the lateral surface of chair with machine paper and paint chair with white enamel paint.
M&L for new components as mentioned in the drg. All joints to be fixed with arc welding and level the surface smooth with stone paper machine required during repair as directed, including dismantling unserviceable components and worn-out cane of following items carefully without disturbing the adjoining parts. Chair CB Steel with arms and without arms (FD-75(M)) Dismantle rusted leg or seat or back rest frame of chair with hack-saw blade and MS conduit pipe 25 mm dia, 16 G (1.6 mm thick) of required length to fixed, duly welded and painted with one coat of red oxide.
M&L for Smooth the lateral surface of chair with machine paper and paint chair with OG/SG enamel paint. Chair CB Steel with arms and without arms (FD-75(M))
M&L for seat frame made out of 1st Class Teakwood frame and canned with 2 mm wide and 0.4 mm thick half-round of approved colour and 4 mm wide thick frame for borders and frames shall be polished or painted as required and fixed with 4 Nos GI Nut, bolt and washer of size 3" long, including remove worn out seat frame. Chair CB Steel with arms and without arms (FD-75(M))
M&L for back frame made out of 1st Class Teakwood frame and canned with 2 mm wide and 0.4 mm thick half-round of approved colour and 4 mm wide thick frame for borders and frames shall be polished or painted as required and fixed with 4 No GI Nut, bolt and washer of size 3" long, including remove worn out back rest frame. Chair CB Steel with arms and without arms (FD-75(M))
M&L for Arm rest made out of 1st class Teakwood, French polished and fixed with MS screws in lieu of broken arms. Chair CB Steel with arms and without arms (FD-75(M))
M&L for Hard rubber bush with MS screws in lieu of worn out one rubber bush. Chair CB Steel with arms and without arms (FD-75(M))
M&L for Hard rubber cap for rear leg top side to be fixed for open end of the conduit pipe. Chair CB Steel with arms and without arms (FD-75(M))
Steel almirah large/medium (FD-1031 / 1032) M&L for new 6 lever lock with duplicate Flat key (2 Nos of key) Make Godrej/ Bharat or Equivalent of existing size fixed with screw/ welding to shutter of almirahs all as specified and directed by Engr-in-Charge, including removing old unserviceable locks from Almirahs.
M&L for new 3-way assembly including 6mm thick bars round with necessary fittings of approved quality all as specified and directed by Engr-in-Charge, including removing old unserviceable 3-way assembly from Almirahs.
M&L for new Godrej pattern handle with necessary fittings of approved quality all as specified and directed by Engr-in-Charge, including removing old unserviceable broken handles from Almirahs.
M&L for new bottom made out of 1mm thick MS sheet made to shape and size on drawing and fixing by welding matching with existing almirah and one coat of synthetic enamel paint over a coat of red oxide primer and all as specified, including removing the unserviceable/rusted bottom from Almirahs steel.
M&L for new legs made out of 1.5 mm thick MS sheet and fixed with welding/riveting for the bottom portion as per existing size and duly painted with two coats of synthetic enamel paint shade over a coat of red oxide primer all as specified, including removing the existing unserviceable legs from Almirahs steel.
M&L for new MS hinges or U clips of same shape & size as existing in steel almirah by fixing duly welded and all as specified and directed by Engr-in-Charge, including removing old broken hinges of Almirahs steel.
M&L for new shelves made out of 1mm thick MS sheet made to shape and size on drawing and fixing with cleats, nuts and bolts all as specified and directed by Engr-in-Charge, including removing the unserviceable shelves from Almirahs steel.
M&L for removing worn-out doors shutter of Almirahs and bringing the item to the original shape and refixing the repaired door shutters with suitable hinges all as specified and directed by Engr-in-Charge.
M&L for removing the existing dented shelves from Almirahs steel bringing the item to the original shape and refixing the shelves with necessary cleats/nuts/bolts including one coat of synthetic enamel paint over a coat of red oxide primer and all as specified and directed by Engr-in-Charge.
Repairs to Charpoy GI pipe with hard plywood (FD/E6/MAP/01) M&L for 12 mm thick BWR Plywood Size 1980 x 900 mm of approved make Type A / AA (approved brand i.e., Greenply/ Kitply/ Century /Sylvan/National/Assam ply/Archid/Alishan) made from the standard size 7' x 3' by removing existing newar from charpoy GI Plytop with edges rounded at four corners including fixing with new MS Nut, bolt 65x3 mm & washer Qty 10 No each and painting the existing Square pipe frames beneath the Plytop.
Table steel 900x900x760 mm (FD-1009) Replace 25 mm square MS pipe 16 gauge as per standard drawings.
Table top size for table 900x900 mm steel of PLB (OST) exterior grade 18 mm thick and provide 4 mm thick teakwood beading alround the top including polishing.
S&F hard rubber shoes to bottom of legs in shape of square 25 mm.
Table Office Clerk Steel FD-(84M) M&L for Table top size 1200 x 610 mm for Table clerk steel / typist steel 18mm thick PLPB (OST) Exterior grade and provide 4mm thick teakwood beading alround the top including polishing.
Description all as per item No. 91 above, but Replace of leg size 25 mm square MS pipe 16 Gauge thick as per standard drgs.
Description all as per item No. 91 above, but Replacement of locks 4 lever with flat type SS key in duplicate Make : Godrej / Bharat or equivalent
Description all as per item No. 91 above, but Drawer of tables office clerk steel as per drg duly painted with red oxide and 2 coat of OG paint.
Description all as per item No. 91 above, but Supply and fix hard rubber shoes to bottom of legs in shape of square 25 mm.
Table Office Officer Steel FD-(1003) M&L for Table top size 1680 x 870 mm for table office officer steel of PLPB (OST) Exterior grade 18 mm thick and provide 4 mm thick teakwood beading alround the top including polishing.
Description all as per item No. 96 above, but Replace of leg size 25 mm square MS pipe 16 Gauge thick as per standard drgs.
Description all as per item No. 96 above, but Replacement of locks 4 lever with flat type SS key in duplicate Make : Godrej / Bharat or equivalent
Description all as per item No. 96 above, but Replacement of drawer of tables office clerk steel as per drg duly painted with red oxide and 2 coat of OG paint
Description all as per item No. 96 above, but Supply and fix hard rubber shoes to bottom of legs in shape of square 25 mm
SOFA SET 3/5 PERSONS WITH CUSHION FD-281 M&L for cushion with size 21''x22''x100mm cool foam cushion of 40 density Make: Kurlon / Century / Sleepwell / feather foam make including providing initial white marking (kora) cloth cover inside to stitched and there after cover with new tapestry (as suitable for sofa cushion the cost of acrylic tapestry should not be less than Rs. 350 per metre (48 wide cloth).
FOAM WITH BACK (FD-78) M&L for 1800x300x25 mm teak wood new seat of foam with back one piece shall be provided at as seat fixed with 3 Nos GI bolts provided at bottom of leg including removal of unserviceable seat specified and directed.
M&L for 1200x150x25 mm teak wood new seat of foam with back one piece shall be provided at as seat fixed with 3 Nos GI bolts 3 mm dia including removal of unserviceable seat specified and directed.
M&L for applying two coats of black synthetic enamel paint of required shade/ colour by spray painting including cleaning of frame complete all as specified and as directed.
M&L for new hard rubber/ PVC shoe for leg including removal of unserviceable hard rubber/ PVC shoes all as per drawings.
BED HARD 6'x3' (FD/E6/MAP/08) M&L for 12 mm thick BWR Plywood Size 1980 x 900 mm of approved make Type A / AA (approved brand i.e., Greenply/ Kitply/ Century /Sylvan/National/Assam ply/Archid/Alishan) made from the standard size 7' x 3' by removing existing old unserviceable plywood from bed hard.
CHAIR ORNATE SUPREME (TP) M&L for taking down the old unserviceable seat of chair ornate supreme and S&F seat with 04 Nos nuts & bolts as per existing the quality and shade/ colour of the cover of seat should match with the existing shade/ colour as approved and directed by Engr-in-charge.
CHAIR ORNATE SUPREME (TP) M&L for taking down the old unserviceable back of chair ornate supreme and S&F back with 04 Nos nuts & bolts as per existing the quality and shade/ colour of the cover of seat should match with the existing shade/ colour as approved and directed by Engr-in-charge.
PART-IV : PAINTING STEEL FURNITURE M & L for preparation of old steel surfaces by scraping with emery paper, cleaning, redusting, making the surfaces smooth and apply putty wherever required and one coat of synthetic enamel paint of approved shade of approved make & quality inside and outside of steel furnitures all as specified and as directed by Engr-in-Charge. Rack steel adjustable 6 tier FD-106
Description all as per item No. 109 above, but Table Office Clerk Steel FD-(84M)
Description all as per item No. 109 above, but Table Office Officer Steel FD-(1003)
Description all as per item No. 109 above, but Table Steel 900x900x760 mm (FD-1009)
Description all as per item No. 109 above, but Bed hard 6'x3'. FD/E6/8/(12)
Description all as per item No. 109 above, but Rack shoe steel (FD/E6/MAP/2/2)
Description all as per item No. 109 above, but Steel almirah large (FD-1031)
Description all as per item No. 109 above, but Steel almirah medium (FD-1032)
Description all as per item No. 109 above, but Rack steel 2175X900X500 mm (FD-106)
Description all as per item No. 109 above, but Rack steel FD-97(M)
Description all as per item No. 109 above, but Rack steel 1875X760X1905 mm (FD-129M)
Description all as per item No. 109 above, but Almirah pigion hole FD-1032
M/s Pintu Furniture
M/s Mohammed Shamim
SKV Engineering
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .