HEW-16 Supply and Installation of Bollard Light at Various Parks of Sector-46 Ward No.20, Badkhal Constituency. Including 5 years defect liability period, ON/OFF of lights and watch and ward free of cost.

S/E and lying Imtr below of underground and armored cable in pipe/existing open/ closed trench etc as 16Sqmm 3.5 Core. Rate are taken from work order no. HEWP/AC-56439 dated-10.11.2023 and including GST Note: it is the lump sum cable. Actual measurement has 800 been done after the work at Site.

“Supply & erection of Mushroom bollard LED 10 12W including foundation with following specification with warranty of five years insurance in case of burning replacement of complete by contractor due to over voltage, current, short circuit, stolen, accident etc. The Mushroom Shaped LED Bollard, BIS certified of main housing and frame of extruded aluminium with a pressure die cast aluminium base in power coat finish and a protector made of LDPE/HDPE (Low/High Density polyethylene) having separate IP65/66 Ingress Protection and control gear compartment, impact resistance of IK05 with dimensions 1000mm suitable for surface mounting, Excellent photometry to maximise the spacing between the bollards, suitable for on ground mounting on 3-M10bolts on 183mm PCD, system power of 10W, CCT 5700K (Optional 3000 & 4000K), CRI > 70, rated voltage 240V, power Factor > 0.90, lumen efficacy 80 LM per watt with BIS certified potted driver having internal surge protection of 4KV Internal, as per catalogue reference of BLK SLE BL 10W 1000- Bollard -10W Make:- Philips, Havells, Crompton, Bajaj, Halonix, Surya or its equivalent. Note: Material inspection at factory permises of OEM having NABL approved lab in same factory permises is to be done by XEN/AE. sample has to be duly certified by XEN before commencement of the work at site. original inspection report of sample mentioning all the technical parameters specified will be submitted by the contractor duly signed by XEN.”v