CA NO. GE(P)AF/GUR-52/2022-23 PERIODICAL SERVICES TO BOUNDARY WALL AND COMPOUND WALL OF X AREA INCLUDING NECESSARY REPAIR AT AF STN GURGAON UNDER GE(P) AF GURGAON.

Amount

M&L for providing precast cement concrete type B0 1:2:4 (12.5mm graded aggregate) as in louvres and jallies, 35mm thick (measured solid), including all mouldings but excluding frame (pre cast frame shall be measured separately) set in CM 1:4 incl dismantling complete all as specified and as directed by Engr-in-Charge.

M&L for Pre-Cast RCC (1:1.1/2:3) (12.5 mm graded crushed stone aggregate) as in pillars of any shape, size & design as approved by Engr-in-Charge and making groves for insert of jafri jallies and fixed with existing jallies/ new jallies as inserting with CM 1:3 completed all as specifed and as directed by Engr-in-Charge.

M&L for 6 to 8 mm dia TMT bars, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips completed all as specifed and as directed by Engr-in-Charge.

All as per item No 03 here-in-before but in stirrups/binders complete all as specified and as directed by Engr-in-Charge.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specifed and directed by Engr-in-Charge.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5 cm but n exc 15 cm wide complete all as specifed and as directed by Engr-in-Charge.

M&L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (using for 20 mm thick crushed stone aggregate) in slabs supported on walls, bends, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specifed and as directed by Engr-in-Charge.

Dismantling of brick work built in cement mortar including all qoins, arches, pillars, etc. complete all as specifed and as directed by Engr-in-Charge.

Demolition in cement concrete ground floor and paving nexc. 15 cm thickness ( below above ground floor ) complete all as specifed and as directed by Engr-in-Charge.

Taking down cement Plaster, any description on Brick Walls or on concrete Surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specifed and as directed by Engr-in-Charge.

M&L for cement concrete type D-2 1:4:8 (40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specifed and as directed by Engr-in-Charge.

Excavating in post holes (or similar holes) each n exc 0.5 cum in soft /loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specifed and as directed by Engr-in-Charge.

M&L for Brick work with sub class B bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specifed and as directed by Engr-in-Charge.

All as per srl item No. 13 here in before but except bricks Note:- Serviceable bricks obatined from srl item No. 8 shall be re-used in srl item No. 14 after cleaning etc complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick in CM (1:6) on brick work or concrete surfaces of brick work, finished fair & even w/o using extra cement complete all as specified and as directed by Engr-in-charge.

Supply only liquid water proofing compound mix cement concrete/cement plaster as per manufacture instruction complete all as specified and as directed by Engr-in-Charge. Make : DR. FIXIT PIDE PROOF LW, CICO, FOSROC.

M&L preparation of new plaster surface on wall and applying two coat of cement base paint complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of walls by Vacuum based sanding machine complete all as specified, removal of nails etc & filling cracks/hole with putty, applying wall care putty upto 1mm thick as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of exterior emulsion paint in Camouflage pattern over a coat of approved primer by auto roller complete all as specified and as directed by Engr-in-Charge.

M&L for Preparation new steel surface exc 10 cm width/girth one coat red oxide primer and two coat synthetic enamal paint complete all as specified and as directed by Engr-in-Charge.

M&L for Preparation of old painted steel surfaces of any description not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.

Dismantling of mild steel work of any description not other wise provided of complete all as specified and as directed by Engr-in-Charge.

M&L for Mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes Fe 410 W (Gde-E-250) quality-A complete all as specified and as directed by Engr-in-Charge.

S&F for MS as in posts, gate (ornamental type) and struts in fencing angle including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing with mesh etc including all necessary drilling bolting or riveting etc and similar work confirming to Fe-290 (Gde-E-165 quality-B. Note:-Posts/struts of angle iron made to shape shall be welded to existing angle iron bracket of security wall, contractor shall make his own arrangement for welding for boundary wall by using gen sets or any alternative arrangement all as specified and directed by Engr-in-Charge.

M&L for expanded metal not exc four kg per sqm, cut to length, bent to shape required and tying with and including annealed muild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and as directed by Engr-in-Charge.

M&L for Steel work in tubular trusses, pillars and purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 complete all as specified and as directed by Engr-in-Charge.

S&F in repair Galvanized 2 stand Steel Barbed wire 2.24mm dia barbed with dia barbs at 75 mm spacing and straining and fixing to any type of stsnderd rails, straining bolts,including securing or tying at crossings with and provisuion of galvanised mild steel pins, etc incl taking down of existing barbed wire as directed (each line wire to be measured) complete all as specified and as directed by Engr-in-Charge.

S&F in repair 950/650/400 or any dia as specified by Eng-in-Charge of concertina coil reinforced punched(chrome razor or blade wire with barbed top of 0.5mm thick galvanised sheet and core wire of dia 2.5mm of high tensile steel wire incuding galvanised MS staples/ Clips for tying at crossing complete including taking down of existing concertina coil all as specified and directed by Engineer–in-Charge.

M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in as in coping cill, rounded or chamffered on edges complete all as specified and directed by Engr in Charge.

Dismantling of plain or corrugated steel sheeting any gauge thickness including nanital or similar pattern roor coverings all as specified and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, crample joints and similar works etc fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

S&F 2mm thick fibre glass reinforced translucent corrugated/ plain sheeting with two corrugations side lap fixed with L type or J-type or cranked hook botls and washer in roof, wall and similar work etc complete all as specified and as directed by Engr-in-Charge.

S&F 1mm mild steel, plain black sheet hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; waters tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and as directed by Engr-in-Charge.

Restriaining resecuring including making good staples or tighting of cross wire galvanised barbed wire in any dia of wire or any spacing complete all as specified and as directed by Engr-in-Charge.

Taking down and refixing in same position after replaing of damage of fencing post concertina coil any dia reinforced punched(chrome razor or blade wire with barbed top of 0.5mm thick galvanised sheet and core wire of dia 2.5mm of high tensile steel wire incuding galvanised MS staples/Clips for tying at crossing complete all as specified and as directed by Engr-in-Charge.

Taking down existing angle iron from wall embadded in PCC and refixing in the same opening/position complete all as specified and as directed by Engr-in-Charge.

M&L preparation of new plastered surfaces of walls by Vacuum based sanding machine complete all as specified, removal of nails etc & filling cracks/hole with putty, applying wall care putty upto 1mm thick as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying one coats of exterior emulsion paint over a coat of approved primer by auto roller complete all as specified & directed by Engineer-in-Charge.

M&L preparation of new plastered surfaces of walls by Vacuum based sanding machine complete all as specified, removal of nails etc & filling cracks/hole with putty, applying wall care putty upto 1mm thick as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of exterior emulsion paint over a coat of approved primer by auto roller complete all as specified & directed by Engineer-in-Charge.

Note:- The amount of Rs 69,000/- against Schedule of Credit on Page No 130 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance

PAWAN KUMAR

M/S ujjwal associates

MOHIT ENTERPRISES

M/S RK Builders

NAVYUG VYAPARI

akhil enterprises

Phogat Builders

M/S Parshant Associates