ADDITION ALTERATION AND SPECIAL REPAIR TO OFFICERS TRANSIT FACILITY BUILDING NO 29 AT BORKHEDI SITE NAGPUR

Amount

Dismantling of tiles work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Providing and laying Ceramic glazed tiles (Non skid type) of size 600x600 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. Similar to Ocean Brown, Somany/ Kajaria.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.Similar to Somany Levis Crema Glossy/ Kajaria.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement:4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Similar to Kajaria K 6212. Double charge vitrified tile polished finish. Size of Tile 60x60 cm

Providing and laying Double charged Vitrified tiles in different sizes (thickness to bespecified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), including routing the joint with white cement & matching pigments etc. complete.Similar to Kajaria K 6212. Size of Tile 600x600 mm

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Dismantling of doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.

Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm).

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3m and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides

Providing and fixing glazing in Aluminium/UPVC door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) sqm

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing white vitreous china pedestal type water closet with UF soft close slim seat cover, Hinges, fixing accessories set and cistern fitting and S trap including cutting and making good the walls and floors wherever required complete all as specified and directed by engineer-in-charge . .( Jaquar model No-LYS-WHT-38851S300UFSM) or equivalent brand Make- Jaquar/Roca/Hansgrohe)

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. Make : hindware/Jaquar/Perryware or equivalent.

Providing and fixing wash basin with CI brackets,32mm CP brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever required. Jaquar Model No- CNS-WHT-813 White vitreous china wash basin(Wall hung ) with fixing accessories size 425 mm x 425mm x155mm with 15mm C.P. brass pillar tap Auto cosing system (Jaguar Model No PRS-CHR-031 & Bottle trap-Jaquar model NO-ALD-CHR-769L300X190, CP waste-Jaquar model No. ALD-CHR-705) or equalent as per directed by engineer -in- charge. Make-Jaquar/Roca/Hansgrohe)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 200 mm,Make: Nirali/ Hindware/Johnson/Somany/ Kingston /Diamond.

Providing and fixing Bottle trap-Jaquar model NO-ALD-CHR-769L300X190, CP waste-Jaquar model No. ALD-CHR-705) or equalent as per directed by engineer -in- charge. Make-Jaquar/Roca/Hansgrohe)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe 32 mm dia

Providing and fixing C.P. Brass towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality colour and make.size-600mm x 20mm (Jaquar CAT NO - ACN - 1111SM)or equivalent Make-Jaquar/Roca/Hansgrohe)

Providing & fixing in position CP Soap dispenser.(Jaquar model no. ACN- 1137 or approved equivalent Brand Roca/Hansgrohe).

Providing and fixing 15 mm nominal bore.C.P.brass long body bib cock of approved quality conforming to IS standard and Weighing not less than 690 gms. (Jaquar model no. CON-107KN or approved equivalent Brand Roca/Hansgrohe).

Providing and fixing unplasticised P.V.C connection pipe with PTMT Nuts coller and bush of approved quality and colour. With 15mm nominal bore with 45cm length

Providing and fixing Rectangular shape Size 630x445mm Swivel mirror of superior glass of approved quality complete with all fitting accessories with C.P. brass screws and washers complete.Jaquar Model No-AKP-35795 or equaivalent. Make-Jaquar/Roca/Hansgrohe)

Providing and fixing Stainless steel with flap toilet roll holder with concealed fitting arrangement of approved quality colour and make. (Jaquar Cat No. AKP-35753PS)or equivalent Make-Jaquar/Roca/Hansgrohe)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge. .Internal work - Exposed on wall

15 mm dia nominal bore

20 mm dia nominal bore

25 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, cutting and making good the walls etc. 50 mm dia nominal bore Make: Tata/Jindal

Providing and fixing CP brass angular stop cock with wall flange of approved quality complete. 20 mm nominal bore (Jaquar Cat No. VGP-81053 )or equivalent Make-Jaquar/Roca/Hansgrohe)

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore. Make: Jaguar/Audco.

Providing and fixing 15 mm nominal bore SS Wall mixer with provision for overhead shower with 115 mm long bend pipe of approved quality conforming to IS standard. (Jaquar model no. FLR-5273UPR/approved equivalent) including Overhead Shower 105 mm round shape single flow of approved quality conforming to IS standard. (Jaquar model no. OHS-1709/approved equivalent).

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Make: Sintax

Providing and fixing 15 mm nominal bore C.P. bass angle valve for basin mixer and geyser points of approved quality conforming to I.S:8931 Jaquar model No. OPP-CHR-15053PM) or equalent as per directed by engineer -in- charge. Make-Jaquar/Roca/Hansgrohe)

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design comp,lete all as specified and directed by Engineer in charge.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps :

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:-Butt hinges and necessary screws shall be paid separately) Second class teak wood 35 mm thick shutters.

Supply & fixing of Brass Tower bolt 200mm long of approved brand

Providing and fixing Brass door handles of 300 mm height with necessary screws etc all complete.

Supply & fixing of brass aldrop 200mm of approved brand

Supply & fixing of brass floor door stopper of approved brand

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : Old work (two or more coats) over and including water thinnable priming coat with cement primer smooth including necessary repairs to scratches etc. complete.

Providing and Applying Two mor More Coats of water proof emulsion coating APEX ULTIMA or equivalent paint of approved brand and shade ( in place of eater proofing cement based paint) to match with the existing shade on external surface of walls with sponge finish including preparation of surface, crapping of loose surface if any, filling of cracks with approved materials by making V groove etc. complete.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:: Cement mortar 1:6 (1 cement : 6 coarse sand

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Providing and fixing false ceiling with Armstrong ceiling tiles 'Fine Fissured' with micro look size 600 X 600 mm of approved colour. Suspension system shall be Armstrong exposed grid system with 15mm wide T section of approved shade. Installation to comprise main runners spaced at 1200mm C / C securely fixed to the structural soffit by approved hanger at 1200mm maximum centres. The last hanger at the end of each main runner should not be greater than 450mm from adjacent wall. 600 x 600 mm modules to be formed by fitting 600mm long flush fittings cross tees centrally between 1200mm cross tees, 4mm galvanised annealeg iron wire with pre straightened to be used for suspension and also including the cost of making opening for light fittings, Grills, Diffusers, cut out made with frame of primetre channels suitably fixed all complete as per drawing and specification and direction of the engineer in charge.

Providing and fixing SS curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.

Providing and fixing 110 mm dia SWR / uPVC pipe 6 Kg/Sqcm (IS:4985-2000) including injection moulded fittings (plain or door) wherever required e.g., bends on any angle, sockets, junction, cowls, offsets, access pieces, jointing with rubber ring/solvent cement joints including covering with cement concrete 1:2:4, cutting and making good the holes in floors and walls wherever required etc. all complete. (for Soil and Waste Drainage pipe).

Providing and fixing 110 mm dia SWR / uPVC bend 6 Kg/Sqcm (IS:4985-2000) including injection moulded fittings (plain or door) wherever required e.g., bends on any angle, sockets, junction, cowls, offsets, access pieces, jointing with rubber ring/solvent cement joints including covering with cement concrete 1:2:4, cutting and making good the holes in floors and walls wherever required etc. all complete. (for Soil and Waste Drainage pipe).

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete kg In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing 18mm thick gang saw cut mirror polished premoulded and polished machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 Cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment. epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all level, Granite stone slab colour black, Cherry/Ruby red

Providing and fixing 18 mm thick Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and laying 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Supplying and Laying of Stone Aggregate (Single size) : 40 mm nominal size

Providing and laying 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20 mm nominal bore

Providing and fixing aluminium casement window fastener of required length for aluminium windows with necessary screws etc. complete.Powder coated minimum thickness 50 micron aluminium.

Providing of 12 mm cement plaster of mix in all surface with cement mortar 1:4 (1 cement : 4 fine sand) at all levels.

Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge.

Detailed Engineering and detailing of Roof of VIP hut and other rooms including submission of structural calculations, detailed drawings, vetting from third party structural agency and submission of three stes of working drawings including plan, elevation and as built drawings all etc, compelete.

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in recessed steel/ PVC conduit as required.

2 x 2.5 sq. mm

2 x 4 sq. mm

Supplying and fixing of 25 mm size of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

8 Module (125mmX125mm)

4 Module (125mmX75mm)

3 Module (100mmX75mm)

1 or 2 Module (75mmX75mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

3 pin 5/6 A socket outlet

15/16 A switch

6 pin 15/16 A socket outlet

Bell push

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing 8 way , Double door horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing 63 A rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB),having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole 6 Amp to 32 Amp

Double pole 25 Amp

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc.with charcoal/ coke and salt as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I thimble excavation and re-filling as required.

Supply, Installation, testing and Commissioning of water heater (Geyser) energy efficient rust proof, ABS plastic 5 star rated of capacity 25 Ltrs with all other accesories etc complete similar to Racold, Model - Eterno2 or equivalent.

Supply, installation, testing and commissioning of following light fittings complete with lamp holder, electrical connections by providing 3C x 1.5sqmm flexible wire, fixing & mounting accessories. All the fittings to be supplied with rated power lamps/LED etc complete.

0.5 W Warm White LED Night Light (Make Philips/ Wipro)

3 W warm White LED Wall Bracket Light (Make Philips/ Wipro/ Crompton)

7 W Warm White LED Bed Bracket Light (Make Philips/ Wipro/ Crompton)

Wall mounted LED Mirror Light Fixture (Make: Philips Cat No. 34034/14/86 Jojoba/ Jaquar/ Wipro).

40 W Milk White LED Batten Light 4 Fit similer to Philips Smart Bright XTRA CAT No. BN100CLED40S-6500PSUL120GR/ Wipro.

12 W Milk White LED Batten light 2 Fit similer to Philips CAT NO. BN021LED2556500PSUGRS1/ Wipro.

10W LED Bulk Head Light Fixture (Make: Philips Cat No. WT202W LED6S CW PSU S2 PC/ Jaquar Model No JIL-WHT-LBLK02X010XC/ Wipro).

25 W Milk White LED Street Light Fitting (Make Philips/ Wipro/ Crompton)

25 W milk White LED wall Mounted Street Light Fitting (Make Philips/ Wipro/ Crompton)

35 w LED Floodlight with all connector accessories (Make: Philips Cat No.BVP120 LED 35 CW FG S1 PSU GR/ Wipro.

Supply and fixing of Street Light Pole Mounted PVC Termination Box with connector etc. Complete

Supply, installation, testing and commissioning of 5 Star Rating ceiling fan of 1200mm sweep ( white colour)Smart Remote with features like Boost, Sleep, Speed Control, and Timer mode Runs 3 times longer on Inverter battery as compared to an ordinary Induction fan, suitable for operation on 230/240V, 50Hz, single phase, AC Supply complete with double ball bearing motor, required down rod, capacitor, three blades, electrical connections by providing 3C x 1.5sqmm flexible wire etc complete.(Atomberg efficio 1200mm BLDC,Make-Atomberg)

Supply, installation, testing and commissioning of domestic PVC energy efficient Exhaust fan 200mm dia with motor, PVC gravity louvres, shutters suitable for single phase 230/240V, AC supply including fixing accessories & electrical connections by providing 3C x 1.5sqmm flexible wire etc complete as required.

Supply, Installation, Testing and Commissioning and handing over of 1.5 Ton capacity 5 Star Inverter Type Split Units alongwith 4KVA stabiliser including proper mounting arrangement comprising of angle base frame, copper piping along with anchoring and finishing initial charge of refrigerant, Thermostat, supply and laying of Control cables with end terminations between the condenser, Evaporator units and Remote etc., complete of make Hitachi/ Bluestar/ Daikin.

Supply and fixing of Electronics Ding Dong Bell make Anchor/ Havells/Panasonic.

Supply, laying, Testing and commissioning of following size1.1KV grade XLPE insulated armoured aluminium/copper conductor under ground cable, inbuilt up cable trench/already laid RCC hume pipe or on cable tray with all installation materials. When the cable is to be laid in ground, the same shall be laid at a depth of 750 mm below ground level including excavation and refilling of earth after cables are laid, providing protection with sand and bricks at sides and top and cable route markers at every 15mtr. interval and also at the turnings. The cable shall conform to IS7098/PartI. Armoring shall be IS 7098 Part IB.

4C X 6 Sq.mm copper

3.5C X 16 Sq.mm Aluminium

3.5C X 25 Sq.mm Aluminium

Supplying and placing in position 3 seater Sofa. The seat is made of PU foam with Desity 28+2 kg/cu.mtr having an additional top layer of super soft PU foam in Density 32+2 kg/cu. upholstered with fabric or leatherette. The back is made of PU foam with Desity 28+ 2kg/cu. mtr with two additional top layer of supersoft foam of density 32+ 2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure is made up of 1.2+ 0.1 cm. thick hot pressed plywood (moisture resistance & termite proof as per IS:303) & pinewood of cross section devoid of major knots & surface defects 6 nos. per seat & 3.8 mm dia zigzag spring assembly is mounted over understructure for cushioning purpose. It is a welded assembly made in stainlesssteel (grade SS 202) tube & plate with plastic endcap. (W) 206.0*(D) 90.5(H) 85.5 cm seat (H) 45.0 cm. (Model : PISA-3 Seater of Godrej or equivalent)

Supplying and placing of Chocolate premium Bedside Table of make Godrej Grande or Equivalent etc all complete.

Supplying and placing of Centre Table of dimensions 900mm x 600mm x 400mm of solid sheesham good with 8mm thick lop and curved legs of ethnic design made out of 80 x 80mm wood section and 45mm x 25mm wooden underfrome members of approved shade (Godrej Alice or Equivalent)

Supplying and placing of Chocolate Kind Bed Dark Walnut of make Godrej or equivalent etc all complete.

Supply and placing of VIP Dining Table for 04(Four) Person made out of 18mm thick MDF board having single 400mm x 400mm Padestal. Top and bottom padestal to have 75mm thickness all covered with teak veneer finished with melamine polish etc all complete (Godrej Grande or Equivalent etc all complete).

Supplying and placing in position Dining chair. GRACE DINING CHAIR WALNUT of Size 450mm x 450mm x 950mm metal materials : (gauge +/- 0.1mm) wooden materials : material : Sheesham solid wood. decoration materials : (density / type ) : colour : metal part colour : black. wooden part colour : dark brown. (Model: Grace or Godrej or approved equivalent)

Supply and placing of VIP Dining Table for 06(Six) Person made out of 18mm thick MDF board having single 400mm x 400mm Padestal. Top and bottom padestal to have 75mm thickness all covered with teak veneer finished with melamine polish etc all complete (Godrej Grande or Equivalent etc all complete).

Supplying and placing in position Study Table. (Model : Godrej or equivalent)

Supply of Table Mats Block printed of dimensions 90 x 45 inches of make Bianca/Status/Bombay dyeing or Equivalent.

Supply of Bath towel of tread pattern etc all complete, make Bombay dying or equivalent.

Supply of Blancket Single (Soft) Single bed of size 230cm x 152 cm of weight 1.8 kg colour as approved, wool/ polypropolene blended blanket conforming to IS -12848 1989 all as specified and of make Signature/Bombay Dyeing /Raymond /Welspun or Equivalent.

Supply of Bed Cover Single cotton bleached white sateen fabric of size 2.28x1.52 mtr, count of weft 2/40s cotton/ weight 800 gm/ ends per inch in inches 54-58 /count of warp cotton 2/80s, pick per inch45-48 all as specified and of make Bombay Dyeing/ Bianca/Status or Equivalent.

Supply of Bathroom Mats Cushion Soft / Door met cusion solf toilet Saral Home Black Soft Microfiber Anti-Skid Bath Mat (Pack of 2, 50 x 70 cm, 6mm/ 0.6 Cms Thickness) of make Bianca/Status/Bombay dying or Equivalent.

Supply of Door curtain of size 2.20 mtrs x width 4-4.5 ft of make D Décor/ Bombay Dyeing/ Décor World or Equivalent.

Supply of Window curtain of size 1.5 mtrs x width 4-4.5 ft of make D Décor/ Bombay Dyeing/ Décor World or Equivalent.

Supply of Door matt welcome Creal PVC of size 36"x24" thickness 1.5 cm anti -slip action backing, moth proof & dirt free all as specified and of make Binca/Status/Bombay Dyeing or Equivalent.

Supply of Bed sheet with two pillow cover for King size bed of and of white or approved colour of make Bombay Dyeing or equivalent.

Supply of Blancket double bed of size of make Signature/Bombay Dyeing /Raymond /Welspun or Equivalent.

Supply of Bed cover for king size bed off white or approved colour of make Bombay Dyeing or equivalent.

Supply and placing of loop pile designer Carpet of size 7.3 x 5.3 Ft etc all complete of make as specified by Engineer-in-charge.

Supply and placing of King size mattress model Dignity of make Sleep Well or equivalent etc all complete.

Supply of Bucket plastic of capacity 25 ltrs, HDPE bucket body, round shape, weight not less than 500 grm all specified and of make Milton / Cello / Bharat or Equivalent.

Supply of Rice Stainer SS (Diameter (inside) (In 70 mm) Compartmental Tray Length 300 MM x Breadth 300 MM Hard Anodized coating 30 Thickness (Micron) Higher is better all specified and of make Cello/Milton/Prestige or Equivalent)

Supply of Storage Container S/S of capacity 5 Ltrs with lid for storage of food items, thickness 1.5 mm all specified and of make Cello/Milton or Equivalent.

Supply of Coaster Plastic Coating With Diameter 80 mm, Thickness 5 mm, Shape and Design Shape Round, colour as approved, Weight not less than 20 grm all specified and of make Venus/ VIP/ Vinod/ Equivalent.

Supply of Fry Pan of 22 cm outer diameter, 4.5 cm height of 5 layer nonstick spray coated, bakelite handle alluminium alloy of 3 mm thickness & 1.25 ltr capacity weight 600 gms all specified and of make NIRLON/ Prestige/Nirlep or Equivalent.

Supply of Gas stove Double burner, Material of Body Stainless steel 304, Material of Burner Cast Iron Material of Nozzle and plug Brass, Material of Gas Taps Brass, Material of injector Jet Brass, Material of Pan Support Stainless Steel 304, Material of Drip Tray Stainless Steel 304 , Material of Knobs Bakelite, Material of Main Gas Pipe Copper Tube, Material of Legs Moulded rubber with metallic covering, Control Off-Sim-Full-On, Length of Stove (mm) 250, Width of Stove 300, Height of the Stove 45, Thickness of Drip Tray Sheet (mm) 0.5, Dia of Big Burner (mm) 55, Dia of Small Burner(mm) 35, No of Legs (mm) 4, Height of Legs (mm) 20 all specified and of make Prestige/Sunflame/Elica/ Bajaj/ Milton of Equivalent)

Supply of Good Knight Gold Flash Mosquitoes repellent Combo Pack (Machine plus rifills pack) all etc compelete.

Supply of Kitchen knife big Plain Blade (Set of 4), Forged Handle, Blade Stainless Steel 304, Material of Handle Thermo Plastic, Blade Hardness (HV) 471-480, Knife Blade Length (mm) 200, Maximum Knife Blade Width (mm) 20, Maximum Knife Blade Thickness (mm) 1.5, Overall Length of Knife (mm) 300 all specified and of make Prestige/Nirlon/Anjali or Equivalent.

Supply of Wall Clock : Grade and Style Grade A: Time Accuracy to within 2 minutes per month (30 days) for quarz clocks, Case Material : Moulded Plastic, Dial and Hands Material Plastic, Dial cover Clear : Plastic, Dial Shape : ROUND, Dial size : 32cm, Dial and Hands Material : Plastic, Dial cover : Clear Plastic, Colour of the body : Mix, Colour of the dial : white, Hour Marking : 12, all specified and of make Ajanta/Titan or Equivalent.

Supply of Pressure cooker 10 ltrs Stainless steel Induction with lid, Container and Grid, Stainless Steel conforming to Designation X04Cr19Ni9 of IS:5522 , Partially hard anodized Stainless Steel Pressure Cooker with Composite Bottom, Composite Bottom electrodeposited with Copper of minimum 0.5 mm thickness all specified and of make Hawkins / Prestige or Equivalent.

Supply of Gas Stove Burner Single, Brass three pin Burner, Toughened Shatter Proof Black-Glass Top, Spill Proof Design , Additional Features Ergonomic Knob Design all specified and of make Prestige/Sunflame/Elica/ Bajaj/ Milton of Equivalent.

Supply of Tawa Iron 15'' with wooden handle Material of Pan/Tawa Iron(Mild Steel), Material of Handle wood, Shape of Pan/Tawa Curved Round, Fixing of Handle Rivietted, Diameter of Pan/Tawa(Round) in mm 450, Thickness of Pan/Tawa (mm) 3.5, Depth of Pan/Tawa (mm) 5, Length of Handle (mm) 220, Length of Handle Cover (mm) 100, Weight of Complete Pan/Tawa2.2 Kg all specified and of make Prestige/Nirlon/ Anjali or Equivalent.

Supply of Parat 528 mm Stainless Steel Grade Designation X04Cr19Ni9 of IS 5522/1992, Outer Diameter of Parat 450 mm, Height of Parat 75 mm, Thickness of Sheet for Parat (mm) 1.25, all specified and of make Prestige/Nirlon/Anjali or Equivalent.

Supply of Pressure cooker 5 ltrs Stainless steel Induction with lid, Container and Grid, Stainless Steel conforming to Designation X04Cr19Ni9 of IS:5522 , Partially hard anodized Stainless Steel Pressure Cooker with Composite Bottom, Composite Bottom electrodeposited with Copper of minimum 0.5 mm thickness all specified and of make Hawkins / Prestige/ United or Equivalent.

Supply of Egg Beater Stainless Steel all specified and of make Cello/Milton/Nirlon or Equivalent.

Supply of Bath Stool -Plastic - Printed Size 33 x 33 x 42 cm all specified and of make Flora/Milton/Cello or Equivalent.

Supply of Soap case of Tough and durable plastic, detachable lid, size 80mmx80 mm x55mm all as spd any company with printed all specified and of make Milton / Cello / Flora ( Milton / Cello / Flora.

Supply of Sleeper No.9 all specified and of make Hawai/Bata/Paragaon or Equivalent).

Supply of Flower Pot BC with Gold colour coating Size 19 X 19 X 25 inch all specified and of make Borosil or Equivalent.

Supply of Cloth Stand Aluminium , Cloth dryer stand with hangers – For shirt-trouser-and more, Load bearing Capacity (Total)10 Kg, Total Drying space1500 mm, Number of Bars4 – bars, Length of stand in 900mm, Height of stand in mm 1050mm all specified and of make Homwell/Kurtzy or Equivalent.

Supply of Lock with three keys with Brass Body all specified and of make Godrej (Navtal Ultra XL)/ Link or Equivalent.

Supply of Dust Bin with Lid 10 Ltr Capacity (HDPE) Pedel, Material : Stainless steel, Lid : foot pedal operated, Weight of Dustbin (Complete unit) (Grams) : 900.00 grams all specified and of make Cello/Milton or Equivalent)

Supply of Water Flask 1000ml (Milton /Cello) Thermosteel 24 Hours Hot and Cold, Water Bottle (Silver Only) LxWxH : 8.9 x 8.9 x 31.6 Centimeters, Item Weight : 512 g all specified and of make Milton/ Cello or Equivalent.

Supply of Clip Board High impact polystyrene Smooth surface Ergonomic plastic clip Size : 38 x 23 x 1.5 Centimeters, Item Weight : 300 g all specified and of make Cello/Camlin or Equivalent.

Supply of Pen Stand Length of the Base 10mm, Width of the Base 8mm, No of Accessories : 06, Number of pen in the pen stand 04 all specified and of make Camlin/Omega or Equivalent.

Supply of Pressure cooker 03 Ltr with lid, and Grid Stainless Steel conforming to Designation, Partially hard anodized Stainless Steel Pressure Cooker with Composite Bottom, Composite Bottom electrodeposited with Copper of minimum 0.5 mm thickness all specified and of make Hawkins/Prestige or Equivalent)

Supply of Tawa Dosa, Type of handle : With, Material of Pan / Tawa : Iron (Mild Steel), Material of Handle : Iron, Shape of Pan/Tawa : Rectangular Base, Length of rectangular Tawa : 300mm, Width of rectangular Tawa : 300mm, Thickness of Pan/Tawa (mm) : 6mm, Weight of Complete Pan/Tawa (Kg) : 5.5 KG all specified and of make Prestige/Hawkins or Equivalent.

Supply of Caseroll Capacity : 5 ltr, Outer Shell Material Stainless Still, Insulation Material : PUF, Shape : Round, Design : Solid, Colour : Stainless steel, Length (cm) 56-60, Width (cm)56-60, Height (cm)56-60 Wall Thickness of shell (mm) 8.0, Thickness of Insulation (mm)1.6-2.0, Weight of casserole(gram)1401-1500, Heat retention time (Hours) 3, Inner Container : Fixed all specified and of make Cello/Milton or Equivalent.

Supply of Double Door Refrigerator of 310 ltr Capacity having best quality all specified and of make Voltas/ Hitachi/ Whirlpool or Equivalent)

Supply of Blue Star 120 Ltr Storage Platinum purifier Series Water Cooler With inbuilt UV purifire Partial SS Body Hot Water Capacity: 5 Litre Per Hour Material- Body (Front and Side panel): PP outer bodyMaterial- Water tank: Stainless steel- 304 Food Grade No. Of Taps: 3 Tap Type: HOT/Cold/Normal water taps Normal Water Storage: 15 Liters Compressor Type: Reciprocating Inbuilt Water Purifier: YES Water purifier Type: UV filter Model No -SWCNST80120UVE Water Purifier Capacity: 50 LPH Type : Platinum Series Water Cooler With UV Cooling Capacity (Ltrs/hr) : 60 Cold tank Capacity(Ltrs) : 65 Hot tank Capacity(Ltrs) : 2 Weight (Kg) : 55 Refrigerant : R-134a Dimension : 66 x 57.5 x 157.5 cm Storage Capacity : 120 Ltr Current : 7.5 Amp etc complete as per direction of engineer in charge. (Make - Voltas, Blue Star or equivalent )

Supply of Micro Oven 30 Ltrs, Type : Convection, Preheat : Yes, Timer : yes, Defrost : Yes, Power Levels : 5, Steam Cook : Yes, Reheat : Yes, Control Features : Feather Touch Membrane, Other Performance Features : Magic Menu : Yes, OVEN Mode : Yes, Quick Start : Yes, Auto Cook Menu : 300, Auto Cook Menu Available : Yes, Design : Black Metal, Cavity Material : Stainless Steel, Door Type : Side Swing, Door Opening : Side Swing, Mechanism : Side Swing, Turntable : Yes, Turntable Features : 31.5, Interior Light ; Yes, Child Lock :Yes, Overheat Protection : Yes, Power Output : 2500W, Power Consumption – Grill : 1400W, Power Consumption – Convection : 2500W, Width : 52cm, Height : 32.6cm , Depth : 50cm, Turntable Diameter : 31.5cm, Weight : 20kg. all specified and of make IFB/Whirpool/Philips or Equivalent)

Supply of Coffee Maker SS, Dimensions (In Inches): Length: 9, Width: 11, Height: 7, Expresso coffee maker- carafe with water level guage. on/off switch with indication light. stainless steel steam pipe. removable drip tray for easy cleaning. 4 cups capacity stainless steel filter. pressure:-3.5 bar. capacity:-240ml.supply/power:-AC220-240V, 800W, aconly. 1.carafe with water level guage. 2.4 cups capacity stainless steel filter. 3.capacity:-240ml 4.pressure:-3.5bar (max) 5.on/off switch with indication light., Pack Content: Set of 3 (1 Coffee maker1 Glass Coffee Cup1 Product Manua1 Warranty Card), Wattage: 250W all specified and of make Morphy Richards/Philips or Equivalent.

Supply of Hot or Cold 20 Ltr Water Dispenser BWD3FMCGA, Flow rate 8 Ltr/Hr (Cold water storage capacity 3.5 Ltrs. Cooling capacity 3 ltrs/hr. all specified and of make Bluestar/Milton/Usha or Equivalent.

Supply of Table Lamp Electrical Colour Black, Light Source : LED, Weight minimum 2 KG, Item Size : 15.2 L x 15.2 W x 43.2 H cm Branded Company only all specified and of make Philips or Equivalent)

Supply of Electric Extension Cord, No. of Sockets - 5 Pin 6 Amp.(In Numbers)4, No. of 6 Amp Switches 4Nos, No. of cores in the cable 3Nos, Length of cable with Extension Box 1.5 Metre, Material of Box Poly Carbonate (Branded Company) all specified and of make Anchor/Bajaj/Havalls or Equivalent)

Supply of and placing Smart LED TV of size 50 inches, all specified and of make Sony/ Panasonic/ LG/ Samsung or equivalent etc all complete.

Supply of and placing Smart LED TV of size 43 inches, all specified and of make Sony/ Panasonic/ LG/ Samsung or equivalent etc all complete.

Old unserviceable Door @ Rs 100 Per Nos

Old unserviceable Window (1.2 Mtr To 2.5 Sqm) @ Rs 50 Per Nos

Old unserviceable Bathroom fitting wall mixcher @ Rs 350 Per Nos

Old unserviceable Shower/Angel Cock/stop cock @ Rs 50 Per Nos

Old unserviceable Towel Rail @ Rs 50 Per Nos

Old unserviceable HWB @ Rs 50 Per Nos

Old unserviceable GI Pipe 20/25 @ Rs 30 Per RM

Old unserviceable Water Tank 500/1000 @ Rs 1000 Per Each

Old unserviceable GI Pipe 50 mm @ Rs 100 Per RM

Old unserviceable Kitchen sink @ Rs 700 Per Each

Old unserviceable Toilet door @ Rs 100 Per Each

Old unserviceable Fly proof door @ Rs 200 Per Each

Old unserviceable Window (1.0 Sqm) @ Rs 200 Per Each

Old unserviceable window type AC 1.5 Ton @ Rs 1000 Per No

Old unserviceable Geyser 25 Ltrs capacity @ Rs 850 Per No

Old unserviceable Exhaust Fan 250 / 300 mm sweep @ Rs 250 Per No

Old unserviceable Ceiling Fan 1200 mm sweep @ Rs 350 Per No

SANGEETA ENGINEERS

SHRAYA ASSOCIATES