Borewell with 10000 Litre OHT at Chinnamathur with distribution line in Mathur Panchayat

Amount

Construction of 10000 Ltrs OHT with Borewell,3.00HP Power Pumnp and Providing Distribution line and FHTC in C Chinnamathur in I.Mathur Panchayat

Earthwork excavation in all classes of soil with initial lead & lift as per SS 20A

Ist depth

II nd depth

filling with good river sand including all cost & conveyance of all materials to site & all labour charges etc complete

CC 1:4:8 mix using 40mm metal including all cost & conveyance of all materials to site & all labour charges etc complete

RCC 1:1,5:3 mix using 20mm metal including all cost & conveyance of all materials to site & all labour charges etc complete

Centering Shuttering and soffits of concrete items including all charges etc completed

Plane Surface Below GL

Plane Surface Above GL

C. CURVED SURFACE

D. SQUARE COLUMNS

Painting two coats with ready mixed Plastic emulsion of first class quality paint and of approved colour over a priming coat ,inculding through scrapping, clean removal of dirt etc. complete and inculding necessary plasterof paris , putty whereever required

Supplying fabrication and placing in position of steel rod for reinforcement including cost of steel binding wire etc completed

fabrication,Supply,Delivery and Fixing of out side MS Ladder

Supply delivery of G.I. Pipes and G.I./PVC specials or tank plumbing work as per I.S. specification.

50 mm G.I. Pipe

63 mm x 50 mm dia PVC Threaded coupler

50 mm G.I. Tee

50 mm G.I. Bend

50 mm dia G.I. Coupling

50 mm G.I. Flange set with rubber sheet

50 mm G.I. Elbow

50 mm G.M. Gate Valve with wheel

Refilling with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification and as directed by TWAD Board Officers.

Drilling of BoreWell

Drilling of borewells in anywhere in Tamlnadu and etc…complete

Upto 60m

Upto 60m to 90m

Reaming from150 to 300mm pilot bore to dia bore upto depth ending from G.L.

Upto 60m

Upto 60m to 90m

supply of 150 MM dia (O.D) PVC ribbed borewell casing pipe C.S (For shallowwell)

Plain Pipe

Slotted

Labour Charges for Inserting the casing pipes with or without slotting

Charges for development of bore well air compressor of approved capacity 8hrs minimum

Supply & delivery of vertical type submersible 3 HP pumpset of discharge 50 lpm against a total head of 100 m suitable for borewell conforming to IS 8034/2002 and as amended from time to time with ISI mark with all asccessories and suitable panel Boards

Dust proof powder coated MV panel board of 18 SWG MS sheet and MS angle iron frame work with hinged front doors and fixed sides with locking arrangements ,provision for cable entry and twin earthing complete as per IE Rules (3 Phase DOL panel board

Supply and delivery of 4sqrm PVC copper flat submersible cable

Supply and delivery of the following size of GI and PVC specials as per IS specification

50mm UPVC -Column Pipe

50mm GI bend (heavy)

50mm M.S.Clamp set

50mm GM Non return valve

50mm GM Gate valve

Labour charges for erection of 5 HP submersible pumpset in Borewell including fixing and jointing of submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps pressure guage upto the exterior wall of the pumproom and erection of the Board consisting of TPICN switch starter volt meter ammeter, 3 pilot (indicating) capacitor, single phasing preventor water level guard and laying and jointing the cable and twin earthing as per IE rules etc. complete and testing the pumpset on trail run for 3 days including signing the completion reports as required by EB authorities. (P.No:243)S.I.N0. 17

Earth work excavation in all types of strata for laying of pipes with the standard trench width as per Bd .Circular No. 28/ AE10/ P&D/ 2001/ dt. 01.10.2001 and JCE (P&D)/ Lr.No. LM/ AE10/ P & D/ 2001/ dt.22.11.2001

Supply of unplasticised PVC rigid pipes as per BIS 4985/2000 with ISI Marking to site of works

a. 90 mm OD HDPE Pipe

Conveying the PVC Pipes and specials to trench lowering into the trenches, laying to proper grade and alignment, Jointing with PVC coupler and specials fixing with Solvent cement paste and testing to the required pressure as per IS including conveyance etc

a.90mm OD HDPE Pipe

Refilling with excavated soil complying with standard specification in layers of 15 cm thick well rammed and consolidated after pipes and specials are laid and tested.

a. 90mm OD PVC Pipe 4 KSC

Hydralic Testing Charges 1m x 61.64/-

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

Supply & Jointing 20 mm SS/brass tap (Local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

K Alagappan