SPECIAL REPAIRS TO SENIOR SAILORS ACCOMMODATION P35 AT KAVARATTI UNDER AGE B R I, KAVARATTI OF GE NAVY LAKSHADWEEP

Amount

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix for mild steel as in vertical posts, roof trusses (framed), trussed, purlins, fastenings and heavy brackets framing (Beam, tee, angle, channel or flat sections) including distance pieces similar work conforming to Fe-410-W(Gde- E-250) quality-B complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mps as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof ridge covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Rendering 5 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement including mixing of water proofing compound complete all as specified and as directed by Engineer-in-Charge. Note: WPC will be measured and paid seperately

Material and labour for rendering or plastering work 10mm thick in CM 1:3 in fascia / edging / ceiling of Chajjas, fins/drops, roof projections etc, including taking out peeled off plaster / concrete and making the line in true shape and finishing the surface without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Supply only liquid water proofing compound complete all as specified and as directed by Engineer-in-Charge.

Preparation of new plastered surface of wall by applying two coats thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper complete all as specified and as directed by Engineer-in-Charge.

Material and labour three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation old decorated painted surfaces of walls and applying one coat exterior emulsion weather proof paint complete all as specified and as directed by Engineer-in-Charge.

Material and labour for complete removal of existing treatment applying two coats of exterior emulsion weather proof paint complete all as specified and as directed by Engineer-in-Charge.

Material and labour applying for exterior emulsion weather proof paint (Appex Ultima or equivalent) of any colour two coats over a coat primer, over a coat of cement based exterior putty not less than 1mm thick on wall column projection, chajjas sides and bottom etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation old decorated painted surfaces of walls and applying one coat of white wash complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation old decorated painted surfaces of ceiling and applying one coat of white wash complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation old decorated painted surfaces of walls and applying one coat oil bond distumper complete all as specified and as directed by Engineer-in-Charge.

Material and labour Pre -cast cement concrete block masonary with solid blocks not exc 10 cm in width type C-1 1:3:6 (20mm graded aggregate) set in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Material and labour RCC M-30 design mix ( 20mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Formwork to soffits of flat suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished surfaces of concrete complete all as specified and as directed by Engineer-in-Charge.

Supply and fix for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.

Material and labour 2nd class hard wood not exc 3 sqcm plain fillets square rectengular or tringular in section clean swan secured with nails or brads complete all as specified and as directed by Engineer-in-Charge.

Material and labour 2nd class hard wood exc 13 sqcm and not exc 25 sqcm plain fillets square rectengular or tringular in section clean swan secured with nails or brads for cupboard frame complete all as specified and as directed by Engineer-in-Charge.

Material and labour 18 to19mm thick Pre-laminated board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination incl necessary jointing cleats, glazing clips, rubber packing, powder beading screw etc, fixed with screw to timber frame complete all as specified and as directed by Engineer-in-Charge.

Dismantaling floor hearth or wall tileing including cement morter bedding and rubbish off the permises complete all as specified and as directed by Engineer-in-Charge.

Material and labour 25 mm thick PCC ,type B-1(20 mm graded aggregate) in flooring complete all as specified and as directed by Engineer-in-Charge.

Material and labour non skid glazed ceramic tiles 7 to 8 mm thick (Square/rectangular) are of each tile exceeding 0.06 Sqm but not exc 0.11 Sqm, in floors set and jointed in cement slurry and pointed in coloured cement including provision of screed bed 15mm thick in CM(1:4) complete all as specified and as directed by Engineer-in-Charge.

Material and labour Glazed ceramic Desginer/ concept tiles coloured of size 300 x 450 x 7mm laid on vertical surface set and jointed in neat cement slurry and pointed in white and colour cement to match over 10mm thick cement plaster in 1:4 CM complete all as specified and as directed by Engineer-in-Charge.

Material and labour for non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectengular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in net cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed in 1:6 CM complete all as specified and as directed by Engineer-in-Charge.

Material and labour for non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectengular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in skirting/dado etc set and jointed in net cement slurry and pointed in white or coloured cement to match over 10mm thick plaster as backing in 1:4 CM complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair anodised aluminium alloy harrison rails with fixing brackets, stops, rollers etc complete all as specified and as directed by Engineer-in-Charge.

Resecuring or easing and adjusting, without taking down shutters of any description exc 1 Sqm but n.exc 2 Sqm each complete all as specified and as directed by Engineer-in-Charge.

Material and labour for one coat of synthetic enamel paint on wooden surfaces including preparation of old surfaces over 10cm width or girth complete all as specified and as directed by Engineer-in-Charge.

Material and labour for one coat of synthetic enamel paint on steel surfaces including preparation of old surfaces over 10cm width or girth complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkhats or frames exc 1.5 Sq.m but not exc 4 Sqm each(with out takilng off shutters from the frame) complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkhats or frames n. exc 1.5 Sq.m each(with out takilng off shutters from the frame) complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid , rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed by Engineer-in-Charge.

Supply and fix for fixed factory made plain framed paneled shutters 35mm thick of 2nd class hard wood (any number of panels) with panels of timber flat on both sides feather edges or panel of 9mm BWP commercial ply over 12mm thick veneered panticle board with commercial face veneers fixed to chowkhat . The size of rail and stile as per IS : 1003 (Part-1), kiln seasoned and chemically pressure teated complete all as specified and as directed by Engineer-in-Charge.

Supply and fix for 35mm thick second class wood glazed and skeleton shutters open rebated and prepared to receive glass gauze etc. edg es of framing plain chamfered or rouonded fittesd with rouned fitted with cut and mitred beads for securing glass, wire cloth etc. complete all as specified and as directed by Engineer-in-Charge.

Material and labour preparation of wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge.

Supply and fix for Aluminium alloy wire cloth 0.45 mm nominal dia or wire and average with of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer-in-Charge.

Supply and fix for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supplying & fixing in opening complete all as specified and as directed by Engineer-in-Charge.

Supply and fix for Factory made solid PVC Mouolded door shutter 28 to 30 mm thick(stiles) with 2,4,or 6 raised panel desilgn with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face supplying & fixing in ferame at site with wood free EPS complete all as specified and as directed by Engineer-in-Charge.

Supply and fix for aluminium, anodised, barrel tower bolt of extruded section and fixed length of bolt 150mm complete all as specified and as directed by Engineer-in-Charge.

Supply and fix for aluminium alloy , anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy & fixed length of bolt 300mm complete all as specified and as directed by Engineer-in-Charge.

Supply and fix for floor door stopper of aluminimum alloy body and tongue, anodised with hard drawn steel spring fixed in floor, overall length of cover plat 140mm complete all as specified and as directed by Engineer-in-Charge.

Supply and fix for aluminium handles cast type anodised, size of handle 150mm complete all as specified and as directed by Engineer-in-Charge.

Supply and fix for 100mm long Butt hinges, stainless steel hinge pin, bright polished complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Aluminium Sliding windows made out of 90 x 30 x 1.5 mm thick three and two track section for frame work alround, two glazed sliding shutters with styles and rails of size 40 x 20 x 1.5 mm thick and wire mesh on outer side for the complete size of window including necessary 0.7 mm thick Aluminium glazing clips, rubber beading for fixing glass panels complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 4mm thick sheet glass ordinary quality glazing with clips and rubber beading complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair PVC SWR pipe 75mm dia single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair PVC SWR bend 75mm dia with oval access door complete all as specified and as directed by Engineer-in-Charge.

Supply and fix repair PVC SWR pipe 110mm dia single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in reapair PVC SWR bend 110mm dia with oval access door complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair PVC SWR pipe 150mm dia single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair PVC SWR bend 150mm dia with oval access door complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 20 mm outer dia of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floor including all pipe fittings such as ends, elbows, unions, tee,reducing tees, adoptors, sockets, plugs hose clips etc and fixing cutting through walls, floors and their making good or layilng in trenches and also cutting, screwing and wastge, Including taking down old pipe complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 25 mm outer dia of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floor including all pipe fittings such as ends, elbows, unions, tee,reducing tees, adoptors, sockets, plugs hose clips etc and fixing cutting through walls, floors and their making good or layilng in trenches and also cutting, screwing and wastge, Including taking down old pipe complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 40 mm outer dia of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floor including all pipe fittings such as ends, elbows, unions, tee,reducing tees, adoptors, sockets, plugs hose clips etc and fixing cutting through walls, floors and their making good or layilng in trenches and also cutting, screwing and wastge, Including taking down old pipe complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvant cement incl necessary PCC & form work as required complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs for white Vitreous China wash down water closet ( pedestal pattern) including any coloured plastic seat cover closet pattern with flat bottom and aluminimum hinging device excluding flushing cistern and connecting to existing out let pipe etc complete all as specified and as directed by Engineer-in-Charge. Note :- Flushing cistern shall be measured & paid separately.

Supply and fix in repair PVC low level flushing cistern 10 ltrs capacity including all fitting i.e float valved, syphon , flushpipe, brackets complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair health foucet hand shower 8mm dia 1m long flexible hook and wall hook complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair 15mm fancy type bib tap, chromium plated with crutch or butterfly handle, screwed down , screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-Charge.

Supply and fix PVC connections 15mm dia with brass nut on both ends and washers 450mm long complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs pillar taps chromium plated cast copper alloy with capstan heads screwed down high poressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipes 15mm dia complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair sheet glass shelf assembly consisting of chromium plated bracket guard and railing 24" long complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs for wash hand basin vitreous china, white, decorative type, flat or angle back, size 550mm x 450mm incliding cutting for and pinning in ends of brackets or erecting stand including waste pipe complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair CP Shower rose with or without swivel joints, any size,including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs Vitreous China urinals, half stall urinal, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Stop valve/ Angle valve cast copper alloy (ISI Marked) chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia, in reapirs complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Stop valve concealed cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia in repair, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair Brass chromium plated Tubular towel rail 20mm dia D type, 60mm long between flanges complete all as specified and as directed by Engineer-in-Charge.

Supply and fix rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float and dismantling of existing PVC tank of any capacity complete all as specified and as directed by Engineer-in-Charge.

Material and labour for cement concrete (1:2:4) type " B1 " ( using 20 mm graded stone aggregate) as seismic, plinth and similar bands, coping, kerbs, cills, steps, parapets, apex stones, bed plates, kerbs, railings up to 60 cm in height, water troughs and the like rounded or chamfered on edges including necessary form work complete all as specified and as directed by Engineer-in-Charge.

Taking down carefully existing aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power ) complete and making good the disturbed surfaces of walls, Floors, ceilings etc to match with existing complete all as specified and as directed by Engineer-in-Charge.

Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches, sockets ,ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings,ceiling fans ,exhaust fans and regulators ceiling rose etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for point wiring complete with PVC insulated and unsheathed, Flame retardant low smoke ( FRLS ) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core in and including rigid PVC concealed conduit not less than 20 mm dia, clip, with suitable MS terminal boxes ( not less than 1.0 mm thick )/ Terminal boxes for modular switches and socket as per requirement. MS terminal boxes modular type painted with one coat of red oxide primer all around including earth dolly with laminated sheet top cover of approved colours including 1.50 sqmm green copper conductor as continuous earth wire with all accessories.

All as item No.80 here in above but for one ceiling fan/exhaust point

All as item No.80 here in above but one 3 pin 5 Amp socket on same board.

All as item No.80 here in above but one 3 pin 5 Amp socket outlet point controlled by one switch on independent board.

Material and labour for point wiring complete with PVC insulated and unsheathed, Flame retardant low smoke ( FRLS ) 1100 volt grade electric cable of 2.5 sqmm (nominal area) with multi stranded copper conductor single core in and including rigid PVC concealed conduit not less than 20 mm dia, clip, with suitable MS terminal boxes ( not less than 1.0 mm thick )/ Terminal boxes for modular switches and socket as per requirement. MS terminal boxes modular type painted with one coat of red oxide primer all around including earth dolly with 3 mm thick plastic laminated sheet top cover of approved colours including 2.50 sqmm green copper conductor as continuous earth wire with all accessories complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Submain wiring complete with and including 2 runs of 6 sq mm single core FRLS PVC insulated and unsheathed multistranded copper conductor cable single core 1100 Volts grade drawn through and including PVC Conduit concealed includng cutting chases on wall/floor etc. making good the disturbed surfaces of wall complete all as directed with accessories and 6 sqmm FRLS PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing submain wiring complete all as specified and as directed by Engineer-in-Charge. Note : Two runs of 6 sqmm PVC insulated cable and one run of 6 sqmm cable for earthing and one run of PVC conduit shall be measured as one unit length.

Supply and fix in replacement socket outlet 3 pin 5 Amp flush type, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement switch socket combination 2 in 1, 3 pin, 5 and 15 Amp, flush type universal complete all as specified and as directed by Engineer-in-Charge.

Supply and fix modular switch button type 5 Amp single pole one way complete all as specified and as directed by Engineer-in-Charge.

Supply and fix ceiling rose three terminals polycarbonate, isolated body complete all as specified and as directed by Engineer-in-Charge.

Supply and laying, connecting and commissioning of 16sqmm, 4 core LT under ground cable 1100 volts grade XLPE insulated armoured heavy duty electric cables with aluminium conductor including connecting with suitable size of cable glands lugs etc. laid in trenches or fixed on walls with including taking down old unserviceable cable complete all as specified and as directed by Engineer-in-Charge.

Supply and laying unreinforced precast concrete cable covers class LV type 1 flat size 250 mm x 150 mm x 40 mm complete all as specified and as directed by Engineer-in-Charge.

Material and labour for sand cushioning with Local Sand in two layer,first layer of 80mm thick before laying of cable and second layer of 100mm thick after laying of cable in trenches/ducts for cable including consolidation of each layer complete all as specified.Note:Thickness of sand cusioning shall be measured after punning. complete all as specified and as directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out soft/loose soil for laying cables/pipes/erection of poles etc.complete all as specified and as directed by Engineer-in-Charge.

Returning filling in, with excavated soils incl. spreading, levelling, watering and well ramming in layers n.exc. 25 cms complete all as specified and as directed by Engineer-in-Charge..

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed by Engineer-in-Charge.

Material and labour for opening the motor of ceiling fans of sweep 1200mm, 230 volts, AC, single phase, removing old unserviceable wire, cleaning of slots properly and rewinding with super enamelled copper winding wire of existing gauge with insulating material, heating, varnishing, greasing, painting with synthetic enamel paint by spraying and writing MES Nos in block letters as per existing, re-assembling the same after testing on full load with blade and replacement of worn out minor parts including provision of PVC insulated and PVC sheathed flexible copper wire, three core of size 16/0.20mm of length 750mm complete including taking down complete all as specified and as directed by Engineer-in-Charge.

All as per item No.96 above but of exhaust fan 300 mm sweep complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs LED tube light fitting, batten type 1x 20 watts, 220volt, 4 feet with long lasting pvc body with slim & sleek looks all pre-wired fixed on walls with all fixing accessories such as 2 nos of pvc square/round boxes, screws, clips etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs LED tube light fitting, batten type 1x 10 watts, 220 volt, 2 feet with long losting pvc body with slim & sleek looks all pre-wired fixed on walls with all fixing accessories such as 2 nos of pvc square/round boxes, screws, clips etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 05 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing round shape 6 watt 220 volts AC recessed type for low height false ceiling with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs LED Bldg Security light fittings and commissioning 1x 35 watts, pressure die cast aluminium housing, heat resistance toughened glass with frame, IP 66 protection, better optics for uniform distribution complete with necessary copper wire connection of suitable size, including GI bracket made out of 40mm GI pipe light grade not less than 1.5m ISI marked duly fixed with MS clamps of 02 Nos nuts bolts etc ccomplete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacemtnt decorative wall light fixture made up of Polycarbonate, suitable for 9W retrofit LED lamp B22 base complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement MCB SPN 40 Amp 240 V, 10 KA 'C' curve complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement MCB SP 5 to 32 Amp, 240 V, 10 KA 'C' curve, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix MCB DB SPN 8 way with 200 Amp copper bus bar single door type (240 Volt) complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Earthing complete with galvanised steel earth plate electrode 60cm×60cm×6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point including testing on completion, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs ceiling fan regulator AC, 230 volts electronic step type complete all as specified and as directed by Engineer-in-Charge.

M/s PATEL ENGINEERING

R.K. Builders

KRA Engineering and Construction

STANDARD ENGINEERING