REPAIR TO HARDSTANDING DRAINAGE, FENCING, PATH ETC AND CONNECTED ITMES AT BD BARI MIL STATION UNDER GE KALUCHAK

Amount

Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and directed.

Demolition of reinforced cement concrete in any position and any description including cutting of reinforcement bars to facilitate demolition complete all as specified and directed.

Taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.

Dismantling mild steel work of any description not otherwise profvided for, complete all as specified & directed.

Dismantling fencing wire mesh, any type, complete all as specified & directed.

Dismantling of galvanized barbed wire any description not otherwise provided for, complete all as specified & directed.

M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:4 complete all as specified and directed.

M & L for brick work with sub class ‘B’ old size bricks (EXCEPT BRICKS) straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:4 complete all as specified and directed. NOTE: - OLD BRICKS OBTAINED FROM DEMOLITION SHALL BE USED UNDER THIS ITEM.

M & L for cement concrete 1:2:4 type B-2, using 40 mm graded stone aggregate as in surface channel or drain complete all as specified and directed.

M & L for providing plain cement concrete, type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 (Design Mix), using 20 mm graded stone aggregate, as in beams, cantilevers, bressummers, lintels over 1.50 m span and the like complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 (Design Mix), using 20 mm graded stone aggregate, as in columns, pillars, piers, posts, struts and the like complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 (Design Mix),as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M & L for form work to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beam and similar works in rough finished flat surface of concrete complete all as specified and directed..

M & L form work to sides of pillars, posts, struts, piers, columns and stanchions in rough finished flart surface of concrete complete all as specified and directed.

M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in fair finished surface of concrete complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 8 mm dia and over up to and including 10 mm dia as in stirrups, spacer and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed .

Excavation in post holes (or similar holes) each not exc. 0.50 Cum, getting out, returning, filling and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm watering and removing surplus soil to a distance not exc. 50 m and making good surface as in hard / dense soil complete all as specified and directed.

M & L for providing plain cement concrete, type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in foundation of pole,stay filling and mass concrete complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type weight n. exc 4.00 kg per sqm complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

S & F of galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, straining bolts at ends, staples or steel pins etc. complete all as specified and directed.

M & L for flat iron fillets fixed to fencing posts concrete complete all as specified and directed.

S & F of mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other or screwed both ends, each screwed ends to be fitted with washer and one hexagonal or square nut, length of bolt exc 10cm and n exc 15cm long and 11 to 15 mm dia of neck complete all as specified and directed.

S & F of mild steel framed work such as gate grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe.410-0 or FE 310-0, complete all as specified and directed.

M & L for 10 mm dia mild steel round bar fixed to chain link fencing cut to length, bent to shape etc, including necessary welding complete all as specified and directed.

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortar 1:4 using water proofing compound as per manufacturer's instructions finished even and smooth without using extra cement complete all as specified and directed. Note : Water Proofing Compound measured and paid separately

Supply only water proofing compound liquid

M & L for providing 50 mm thick pre-cast cement concrete louvers or RCC Jali made out of cement concrete 1:2:4 type B-0, using 12.5 mm graded stone aggregate and set in cement mortar 1:4 including all mouldings etc. complete all as specified and directed.

M & L for 75 mm thick cement concrete 1:4:8 type D-2, using 40 mm graded stone aggregate as laid in sub base to flooring without using extra cement complete all as specified and directed.

M & L for precast designer coloured heavy duty full body paving tiles (factory made) of size 300mmx300mm x 10mm, top layer glazed made in any type of cement and pigment, in required patterns as approved by GE in floor etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:4, complete all as specified & directed.

Providing and laying 60 mm thick factory made confirming to IS-15658-2006 chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation as required complete all as specified and directed.

M & L for preparation of steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M & L for one coat fo primer on wall through normal applications complete up to the height of 7.5 metre complete all as specified and directed.

M & L for applying two coats of ‘Weather coat exterior paints on wall through normal application methodology using machinery etc complete up to the height of 7.5 metres all as per manufactrer's indtructions and completeover one coat of primer using mechanical vaccume machine complete all as specified and directed.

M & L for preparation of old steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for complete removal of old finishes from walls by scrapping, rubbing down, with sand paper, finish the undulated surface by cement putty and applying two coats of ‘Weather coat exterior paints on wall through normal application methodology using machinery etc after application of one coat of primer complete all as specified and directed.

M & L for 100 mm thick cement concrete 1:2:4 type B-2, using 40 mm graded stone aggregate as in alternate panels, including all formwork, finished even and fair withot using extra cement complete all as specified and directed.

M& L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound , Grade ‘A’ (ration bitumen 1 and sand 3) complete all as specified and directed.

M & L for Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed complete all as specified and directed.

M & L for providing reinforced cement concrete 1:2:4 (Nominal Mix) type B-0, using 12.50 mm graded stone aggregate, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones,bed platesetc and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

S & F of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to wall complete all as specified and directed.

ASHISH CONSTRUCTION COMPANY (BID ID -3350600)

M/s Ashok Kumar (BID ID -3350181)

BALVINDER SINGH AND SONS (BID ID -3350346)

GENESIS INDIA (BID ID -3350463)

M/S VED PAUL MAHAJAN (BID ID -3350410)

M/s K.S. Constructions (BID ID -3350517)

KIRAN AGENCIES (BID ID -3349979)