Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.5 LAccepted-AOC 150 BC LINE MALL ROAD MEERUT CANTT 250001 | MEERUT | UTTAR PRADESH | 250001 | ₹5.5 L | L1 | Accepted-AOC BEING L1 |
| 2 | L2₹6.1 L+₹59,937.50 (10.8%)Rejected-Finance H NO 07 SHIVAJI NAGAR PATHANKOT 145001 | PATHANKOT | PATHANKOT | PUNJAB | 145001 | ₹6.1 L+₹59,937.50 (10.8%) | L2 | Rejected-Finance Other than lowest tenderer |
| 3 | L3₹6.6 L+₹1.1 L (19.8%)Rejected-Finance | ₹6.6 L+₹1.1 L (19.8%) | L3 | Rejected-Finance Other than lowest tenderer |
| 4 | L4₹6.8 L+₹1.3 L (23.6%)Rejected-Finance | ₹6.8 L+₹1.3 L (23.6%) | L4 | Rejected-Finance Other than lowest tenderer |
| 5 | L5₹7.0 L+₹1.5 L (26.8%)Rejected-Finance | ₹7.0 L+₹1.5 L (26.8%) | L5 | Rejected-Finance Other than lowest tenderer |
| Sl No | Description | Qty | Unit | M/S MALHI CONSTRUCTIONS L4 | DASHMESH BUILDERS L5 | M/S SAROOP ELECTRICAL & MECHANICAL WORKS L3 | M/s Shakti Electric Works L2 | VIRAT CONSTRUCTIONS L1 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking out/lifting up submersible pump set with comlete pipe of capcity 5 HP with 32mm dia bore and submersible cable from 125mm casing pipe,from bore well having upto 110 Mtr depth and lowering complete including lowering pupset after repair complete and testing all specified and directed by Engineer-in-Charge. | 2 | Each Job | 10,000 ₹20,000 | 2,000 ₹4,000 Lowest | 2,249 ₹4,498 | 2,000 ₹4,000 Lowest | 3,500 ₹7,000 |
| 2.00 | M&L for transportation of defective submersible pumping set of 5 HP capacity to nearset wokshop and return back after repair and reassembling the pump set complete all as specified and directed by Engineer-in-Charge. | 2 | Each Job | 5,000 ₹10,000 | 2,000 ₹4,000 | 699 ₹1,398 Lowest | 1,500 ₹3,000 | 2,000 ₹4,000 |
| 3.00 | M&L for Rewinding of Submersible pump capacity 5 HP with super enammeled copper winding wire of existing size applying insulating varnish drying up by heating for improving insulation resistance, incl , replacement of empiler, bush , bearing, shaft etc, complete and reassembling after complete testing all as specified and dircted by Engineer-in-Charge. | 2 | Each Job | 10,000 ₹20,000 | 5,000 ₹10,000 Lowest | 6,000 ₹12,000 | 5,000 ₹10,000 Lowest | 6,500 ₹13,000 |
| 4.00 | Supply and fixing in replacement of MU-G6 DOL starter for 3 phase suitabule for submercible pump for capacity 5 to 7.5 HP , 3 phase including relay range 6-10 A , Coil voltage range 360V-W (200-400), control wiring & motor protector assembly having dry run protection, phase sequence corrector, earth leakage protection, single phase protection, high voltage and low voltage, time delay power on programme time complet all as specified and directed by Engineer-in-Charge. | 2 | Each | 5,000 ₹10,000 | 1,500 ₹3,000 Lowest | 12,590 ₹25,180 | 4,500 ₹9,000 | 8,500 ₹17,000 |
| 5.00 | Supply and fixing in replacement of borewell pipe of dia 40 mm pressure PN6/6kg suitable for submercible pump for capacity 5 to 7.5 HP including all connected fitting items complete all as specified and directed by Engr-in-charge. | 180 | RM | 400 ₹72,000 | 800 ₹1,44,000 | 120 ₹21,600 Lowest | 200 ₹36,000 | 650 ₹1,17,000 |
| 6.00 | Supply & laying of Submersible flat type cable 10 Sqmm 3 core and connecting with the pumping set motor carefully including taking down the existing cable complete all as specified | 200 | RM | 500 ₹1,00,000 | 400 ₹80,000 | 569 ₹1,13,800 | 60 ₹12,000 Lowest | 210 ₹42,000 |
| 7.00 | Supply and installation ,commissioning and testing of submersible pumpset of capacity 5 HP having min 95 mtr Head ,3phase electric driven 415 volts suitable for 100/80 mm dia bore well complete all specified and directed. and Old submersible pumpset taken in AGE E/M store. | 1 | Each | 80,000 ₹80,000 | 18,000 ₹18,000 Lowest | 58,000 ₹58,000 | 1,10,000 ₹1,10,000 | 50,000 ₹50,000 |
| 8.00 | Repair/replacement and dismantling and taking down for overhauling of pump set/monoblock motor of Capacity 7.5 HP, of M/S Kirloskar Ltd/ Becon including provision of replacement of following defective parts all as required.
(a) Bronze impellar suitable for 7.5 HP pump set.
(b) Ball bearing suitable for 7.5 HP pump set
(c) Bronze bush suitable for 7.5 HP pump set
Reassambling complete set including connecting and testing in accordance with manufactures instruction to ensure stipulated performance all as desired to the entire satisfaction of dept. | 2 | Each Job | 5,000 ₹10,000 | 3,000 ₹6,000 Lowest | 9,500 ₹19,000 | 5,000 ₹10,000 | 4,500 ₹9,000 |
| 9.00 | Repair/replacement and dismantling and taking down for overhauling of pump set/ monoblock motor of Capacity 3 to 5 HP, of M/S Kirloskar Ltd/ Becon including provision of replacement of following defective parts all as required.
(a) Bronze impellar suitable for 3 to 5 HP pump set.
(b) Ball bearing suitable for 3 to 5 HP pump set
(c) Bronze bush suitable for 3 to 5 HP pump set
Reassambling complete set including connecting and testing in accordance with manufactures instruction to ensure stipulated performance all as desired to the entire satisfaction of dept. | 8 | Each Job | 3,000 ₹24,000 | 2,000 ₹16,000 Lowest | 7,899 ₹63,192 | 4,000 ₹32,000 | 3,500 ₹28,000 |
| 10.00Note for Item No 8 and 9 :- (i) Quoted rates are also deemed to be included for replacement of gaskets, packing with bearing grease, glands with graphite packing , nuts bolts , washers etc. (ii) Cost of transportation shall be deemed to be included in the rate quoted for these items. (iii) While taking out pump for repairs , the contractor will make arrengement pluging suction and discharge line with dead flanges, so that pumping of installation is not disturbed and there is no leakage of water. | ||||||||
Tender Value
₹9 L
EMD Value
₹18,000
Closing Date
15 Jul 2026, 6:00 pmClosed
AGE(I) DALHOUSIE
AGE(I) DALHOUSIE PIN-176305
REPAIR/ MAINTENANCE OF VARIOUS TYPE OF PUMPS, MOTORS, MOTORS PROTECTION PANEL AND CONNECTED WORK AT DALHOUSIE CANTT UNDER AGE(I) DALHOUSIE
2026_MES_771490_1
AGE(I)/D-26/2026-27
Open Tender
Civil Works - Water Works
Item Rate
180 days
AGE(I) DALHOUSIE
Class E and above category a(ii)
8 documents required · 8 mandatory
₹500
AGE(I) DALHOUSIE
₹18,000
Yes
1 Sept 2026
15 Jun 2026
22 Jul 2026
15 Jun 2026
15 Jul 2026
30 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking out/lifting up submersible pump set with comlete pipe of capcity 5 HP with 32mm dia bore and submersible cable from 125mm casing pipe,from bore well having upto 110 Mtr depth and lowering complete including lowering pupset after repair complete and testing all specified and directed by Engineer-in-Charge. | 2 | Each Job | - | - |
| - | M&L for transportation of defective submersible pumping set of 5 HP capacity to nearset wokshop and return back after repair and reassembling the pump set complete all as specified and directed by Engineer-in-Charge. | 2 | Each Job | - | - |
| - | M&L for Rewinding of Submersible pump capacity 5 HP with super enammeled copper winding wire of existing size applying insulating varnish drying up by heating for improving insulation resistance, incl , replacement of empiler, bush , bearing, shaft etc, complete and reassembling after complete testing all as specified and dircted by Engineer-in-Charge. | 2 | Each Job | - | - |
| - | Supply and fixing in replacement of MU-G6 DOL starter for 3 phase suitabule for submercible pump for capacity 5 to 7.5 HP , 3 phase including relay range 6-10 A , Coil voltage range 360V-W (200-400), control wiring & motor protector assembly having dry run protection, phase sequence corrector, earth leakage protection, single phase protection, high voltage and low voltage, time delay power on programme time complet all as specified and directed by Engineer-in-Charge. | 2 | Each | - | - |
| - | Supply and fixing in replacement of borewell pipe of dia 40 mm pressure PN6/6kg suitable for submercible pump for capacity 5 to 7.5 HP including all connected fitting items complete all as specified and directed by Engr-in-charge. | 180 | RM | - | - |
| - | Supply & laying of Submersible flat type cable 10 Sqmm 3 core and connecting with the pumping set motor carefully including taking down the existing cable complete all as specified | 200 | RM | - | - |
| - | Supply and installation ,commissioning and testing of submersible pumpset of capacity 5 HP having min 95 mtr Head ,3phase electric driven 415 volts suitable for 100/80 mm dia bore well complete all specified and directed. and Old submersible pumpset taken in AGE E/M store. | 1 | Each | - | - |
| - | Repair/replacement and dismantling and taking down for overhauling of pump set/monoblock motor of Capacity 7.5 HP, of M/S Kirloskar Ltd/ Becon including provision of replacement of following defective parts all as required.
(a) Bronze impellar suitable for 7.5 HP pump set.
(b) Ball bearing suitable for 7.5 HP pump set
(c) Bronze bush suitable for 7.5 HP pump set
Reassambling complete set including connecting and testing in accordance with manufactures instruction to ensure stipulated performance all as desired to the entire satisfaction of dept. | 2 | Each Job | - | - |
| - | Repair/replacement and dismantling and taking down for overhauling of pump set/ monoblock motor of Capacity 3 to 5 HP, of M/S Kirloskar Ltd/ Becon including provision of replacement of following defective parts all as required.
(a) Bronze impellar suitable for 3 to 5 HP pump set.
(b) Ball bearing suitable for 3 to 5 HP pump set
(c) Bronze bush suitable for 3 to 5 HP pump set
Reassambling complete set including connecting and testing in accordance with manufactures instruction to ensure stipulated performance all as desired to the entire satisfaction of dept. | 8 | Each Job | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.58 MB
BOQ_864763.xls
BOQ • 0.38 MB
Tenderdocuments262627.pdf
Tender Documents • 0.90 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .