Tirupathur District, Jal Jeevan Mission 20-21 Providing Founctional Household Tap Connection in Karupanur Panchayat at Thirupathur Block Package No.61

Amount

Providing FHTC, Existing Borewell Drilling and Extension of pipe line at Karuppanur Habitation in Karupanur Panchayat

Deepening the existing bore well and Replacement of new motor and GI pipes and Extension of pipe line @ Karupannur Habitation in Karuppanur Panchayat

Three phase submersible Pumpset having duty 50LPM x 2225m head 7.5HP

Three Phase Panel board 7.5HP

4.00 Sq.mm Cable

40mm GI Pipe without coupling

40mm GI Coupling

40 mm Mon Return valve

40mm G.I Bend

40 mm MS Clamp Set

63 A Fuse unit

Bore cover plate

Labour Component

Flushing of borewell of 6" dia requiring less than 4 hours operation using drill rods/ hose with required size of pipes for various capacity compressor including transportation, labour, and fuel charges for compressors etc. ( 125 cfm - 100PSI)

Drilling of 150 dia vertical bore well in hard rock rig including cost and drilling etc.,

Labour charges for errection of Three phase pumpset with GI pipe & cable connection complete.

Providing Extention of Delivery Pipe Line @ Karupanur

63 mm PVC 4KSC

63 mm bend

63 mmTee

Solvent solution

Earth work excavation and depositing on bank with initial lead and lift in all soil (30m x0.60m x1.05m)

Laying and jointing the PVC pipes & specials into trench

Refilling the trench with excavated after laying the pipe

Provision for water meter 50 mm , page 81 of SOR TWAD

Dirt box

Fitting Charges of Meter in OHT Column

Provision for 50 mm Water meter - TWAD SOR PAGE 81 , 16 clause

Water meter Dirt BOX

Water meter erection charges

Provision for pit for Water meter 90X75cm

Electro Chlorination Disinfection common salt as per TWAD SOR P. No 57 Clause 21.2(3 OHT)

Provision for 50 mm Gate Vapve

Providing FHTCs (8m length per FHTC)

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

Supply & Jointing 20 mm SS/brass tap (Local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

BT ROAD / WBM ROAD CUTTING CHARGES

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

Providing FHTC, Extension of pipe line at Kollamedu Habitation in Karupanur Panchayat

Providing FHTCs (8m length per FHTC)

Providing Extention of Delivery Pipe Line @ Kollamedu

63 mm PVC 4 KSC

763 mm bend

63 mmTee

63mm end cap

Solvent Solutions

Earth work excavation and depositing on bank with initial lead and lift in all soil (30m x0.60m x1.05m)

Laying and jointing the PVC pipes & specials into trench

Refilling the trench with excavated after laying the pipe

Provision for Gate Valuve

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

Supply & Jointing 20 mm SS/brass tap (Local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

BT ROAD / WBM ROAD CUTTING CHARGES

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

Providing FHTC, Extension of pipe line at Ex Thalaivar Vattam Habitation in Karupanur Panchayat

Providing FHTCs (8m length per FHTC)

Providing Extention of Delivery Pipe Line @ Ex Thalaivar Vattam

63 mm PVC 4 KSC

763 mm bend

63 mmTee

63mm end cap

Solvent Solutions

Earth work excavation and depositing on bank with initial lead and lift in all soil (30m x0.60m x1.05m)

Laying and jointing the PVC pipes & specials into trench

Refilling the trench with excavated after laying the pipe

Provision for water meter 50 mm , page 81 of SOR TWAD

Dirt box

Fitting Charges of Meter in OHT Column

Provision for 50 mm Water meter - TWAD SOR PAGE 81 , 16 clause

Water meter Dirt BOX

Water meter erection charges

Provision for pit for Water meter 90X75cm

Electro Chlorination Disinfection common salt as per TWAD SOR P. No 57 Clause 21.2(1 OHT)

Provision for Gate Valuve

Providing FHTCs (8m length per FHTC)

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

Supply & Jointing 20 mm SS/brass tap (Local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

BT ROAD / WBM ROAD CUTTING CHARGES

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

Providing FHTC, Extension of pipe line at Vellalar Street Habitation in Karupanur Panchayat

Providing FHTCs (8m length per FHTC)

Providing Extention of Delivery Pipe Line @ Vellalar Strret

63 mm PVC 4 KSC

763 mm bend

63 mmTee

63mm end cap

Solvent Solutions

Earth work excavation and depositing on bank with initial lead and lift in all soil (30m x0.60m x1.05m)

Laying and jointing the PVC pipes & specials into trench

Refilling the trench with excavated after laying the pipe

Provision for Gate Valuve

Providing FHTCs (8m length per FHTC)

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

Supply & Jointing 20 mm SS/brass tap (Local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

BT ROAD / WBM ROAD CUTTING CHARGES

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

Providing FHTC, Extension of pipe line at Chakkara Street Habitation in Karupanur Panchayat

Providing Extention of Delivery Pipe Line @ chakkara street

63 mm PVC 4 KSC

763 mm bend

63 mmTee

63mm end cap

Solvent Solutions

Earth work excavation and depositing on bank with initial lead and lift in all soil (30m x0.60m x1.05m)

Laying and jointing the PVC pipes & specials into trench

Refilling the trench with excavated after laying the pipe

Provision for water meter 50 mm , page 81 of SOR TWAD

Dirt box

Fitting Charges of Meter in OHT Column

Provision for 50 mm Water meter - TWAD SOR PAGE 81 , 16 clause

Water meter Dirt BOX

Water meter erection charges

Provision for pit for Water meter 90X75cm

Electro Chlorination Disinfection common salt as per TWAD SOR P. No 57 Clause 21.2(1 OHT)

Provision for Gate Valuve

Providing FHTCs (8m length per FHTC)

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

Supply & Jointing 20 mm SS/brass tap (Local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

BT ROAD / WBM ROAD CUTTING CHARGES

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

Providing FHTC, Extension of pipe line at Appunu Vattam Habitation in Karupanur Panchayat

Providing FHTCs (8m length per FHTC)

Providing Extention of Delivery Pipe Line @ Appunu Vattam

63 mm PVC 4 KSC

763 mm bend

63 mmTee

63mm end cap

Solvent Solutions

Earth work excavation and depositing on bank with initial lead and lift in all soil (30m x0.60m x1.05m)

Laying and jointing the PVC pipes & specials into trench

Refilling the trench with excavated after laying the pipe

Provision for Gate Valuve

Providing FHTCs (8m length per FHTC)

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

Supply & Jointing 20 mm SS/brass tap (Local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

BT ROAD / WBM ROAD CUTTING CHARGES

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

Providing FHTC, New Borewell ,Extension of pipe line and New OHT 30000 at MGR Nagar Habitation in Karupanur Panchayat

Earth work excavation below G.L. and depositing on bank within an initial lead of 10.00 m and an initial lift of 2.00 for the following classification of soil Second depth of 2.00 m

Second depth of 2.00m to 3.00m

PCC 1:4:8 using 40mm HBG metal including mixing curing etc.,below 1.50 m from GL.

RCC in M 30 mix using10mm& 20mm size HBG metal excluding cost of reinforcement and centering but including cost of mixing, laying, curing, finishing etc.complete

Below 1.5m from GL Column footing

0m to 1.50m below GL

0m to 1.00m above GL

1.00m to 4.50m above GL

4.50 m to7.32 m above GL

7.32 m to10.98 m above GL

10.98 m to14.64 m above GL

14.64 m to18.30m above GL

Steel Centering, soffits of RCC works including strutting and shuttertting Charges etc. complete for the following Plain Surface

Below GL

Square Column Below GL and upto 3.30m

5.31m to 6.30m ht

8.31m to 9.30m ht

11.31m to 12.30m ht

curved surface up to 3.30m ht

Floor slab from 5.31 to 6.3

Square column

Square Column Below GL and upto 3.30m above GL

3.31m to 4.30m ht

4.31m to 5.30m ht

5.31m to 6.30m ht

6.30m to 7.30m ht

7.30m to8.30m ht

8.30m to 9.30m ht

9.31m to 10.30m ht

10.31m to 11.30m ht

11.31m to 12.30m ht

Painting two coatsto the exposed surface of SR using cement paint

Supply, fabrication, placing in position of steel rods cutting tying etc. complete including cost of reinforcement RTS rods.

Providing M.S Ladder of 45cm wide made out of 50x50x6mm MS angle for sides and steps in 16mm MS plain rods fixed at 30 cm centre to centre etc as per approved design

Providing hand Rail over the roof slab by using 32 mm GI pipe with 40mm x 6mm MS flat and fixed with 12mm dia fastner Boit 75mm long and as directed by officers

Providing and fixing of RCC inner access ladder in RCC 1:1.5:3 (One cement, one and half sand and three aggregates) using 20mm HBG stone for OHT including cost of reinforcement, placing grill in position, centering shuttering charges, mixing concrete curi

Providing and fixing of PVC Ventilating Arrangement mosquito proof nylon net with 110 mm PVC Cowl

Providing cut stone slab in CM 1:3 of size 0.3 m x 0.3 m x 0.15 m and as directed by officers

Providing manhole cover of size 0.60 x 0.60M in RCC 1:1.5:3 with suitable reinforcement and 50x50x6mm MS angle fixed along edges and as directed by officers

Provision for pipe connection arrangements for inlet, outlet scour and overflow etc. including cost of pipes, specials, valve, labour charge for lifting, aligning, cutting, threading, fixing and painting of GI pipes with two coats of approved quality enam

65m dia GI Pipe for inlet connection& outlet

75mm dia pvc thread coupler

65mm dia GI Tee

65mm dia GI Elbow

65mm dia GM Gate valve

65 mm dia Flange set

65mm dia GI coupling

65mm dia GI Dummy

63mm dia pvc 6Ksc Pipe

63mm dia pvc Bend

cutting of 65mm GI pipes

Threading of 65mm GI pipes

90mmx 75mm dia PVC Reducer

90mm x 80mm PVC Threaded Coupler

Labour charges for GI pipe connection to the OHT

Refilling the foundation with excavated earth including consolidation as directed by the officers

Rain Water rain water Harwesting

New Bore well and new motor and GI pipes and Extention of pipe line @ MGR Nagar in Karuppanur

Supplying and delivery of 180 mm dia casing pipe 10 kg/cm2

Three phase submersible Pumpset having duty 50LPM x 2225m head 7.5HP

Three Phase Panel board 7.5HP

4.00 Sq.mm Cable

40mm GI Pipe without coupling

40mm GI Coupling

40 mm Gate valve

40 mm G.I Elbow

40 mm MS Clamp Set

Towards of supply of MS Kisok using cost and conveyance etc

25 mm GI Pipe for EB Servicing

7/20 PVC Copper Wire for EB Servicing

7/20 G.I Wire for E.B.Servicing

63 A Fuse unit

Teak wood Board

Bore cover plate

75 mm PVC in 6KSc

63 mm PVC in 6KSc

75 mm PVC Bend

75 mm PVC Tee

Labour Component

Drilling of 150 dia vertical bore well in hard rock rig including cost and drilling and labour inserying of casing pipe etc.,

Drilling of 150 dia vertical bore well in hard rock rig including cost and drilling etc.,

Labour charges for errection of Three phase pumpset with GI pipe & cable connection complete.

Construction of Masonry pedestal for E.B Kiosk

Earth work excavation and depositing on bank with initial lead and lift in all soil (30m x0.60m x1.05m)

Laying and jointing the PVC pipes & specials into trench

Refilling the trench with excavated after laying the pipe

Providing Extention of Delivery Pipe Line @ MGR Nagar

63 mm PVC 4KSC

63 mm bend

63 mmTee

63 mm end cap

Solvent solution

Earth work excavation and depositing on bank with initial lead and lift in all soil (30m x0.60m x1.05m)

Laying and jointing the PVC pipes & specials into trench

Refilling the trench with excavated after laying the pipe

Provision for water meter 50 mm , page 81 of SOR TWAD

Dirt box

Fitting Charges of Meter in OHT Column

Provision for 50 mm Water meter - TWAD SOR PAGE 81 , 16 clause

Water meter Dirt BOX

Water meter erection charges

Provision for pit for Water meter 90X75cm

Electro Chlorination Disinfection common salt as per TWAD SOR P. No 57 Clause 21.2(3 OHT)

Providing 50 mm Gate Valve with specials etc

Providing FHTCs (8m length per FHTC)

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

Supply & Jointing 20 mm SS/brass tap (Local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

BT ROAD / WBM ROAD CUTTING CHARGES

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

Providing FHTC, Extension of pipe line at Muslim Vattam Habitation in Karupanur Panchayat

Providing FHTCs (8m length per FHTC)

Providing Extention of Delivery Pipe Line @ Muslim Vattam

63 mm PVC 4 KSC

763 mm bend

63 mmTee

63mm end cap

Solvent Solutions

Earth work excavation and depositing on bank with initial lead and lift in all soil (30m x0.60m x1.05m)

Laying and jointing the PVC pipes & specials into trench

Refilling the trench with excavated after laying the pipe

Provision for Gate Valuve

Providing FHTCs (8m length per FHTC)

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

Supply & Jointing 20 mm SS/brass tap (Local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

BT ROAD / WBM ROAD CUTTING CHARGES

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

GST Amount for providing service to Government contract works for the above construction works. { GST amount is the Total GST amount for total overall quoted amount above this row in column "BB" for all works in this package}

T SANKAR