Construction of 5 No. shops of un utilized open basement in Block No. A I Pooled Accommodation in Housing Colony at Knolls Wood, Shimla, H.P.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complet including carriage of aterial in all leads and lifts.

1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)

1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:3 (1 cement :3 coarse sand)including carriage of aterial in all leads and lifts.

Supplying and fixing rolling shutters of approved make, made of required size G.I. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm G.I. laths with 1.25 mm thick top cover including carriage of aterial in all leads and lifts.

Providing and fixing ball bearing for rolling shutters including carriage of aterial in all leads and lifts.

Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm, in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles including carriage of aterial in all leads and lifts. Medium shades pigment using 50% white cement and 50% ordinary cement

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of aterial in all leads and lifts. Size of Tile 600x600 mm