REPAIR TO INTERNAL ELECTRIC WIRING, CEILING FANS AND EXHAUST FANS AT MD AND OTM ACCN UNDER GE (EAST) JALANDHAR CANTT

Amount

Taking down carefully existing point wiring of any type (i.e. on wooden batten, surface conduit, casing capping or concealed conduit) complete for light, fan socket or power point with fitting Supply and fixing fixtures such as ceiling rose, electric fittings, holders, switches, sockets wooden batten, conduit etc including accessories such as wooden gutties/ rawl plug, screw etc including removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed

Material and labour for point wiring with 1.5 Sqmm, PVC insulated unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit fire proof ISI marked 20mm dia or higher complete with all conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and sunk type pressed steel terminal switch box 1.6mm thick with 3 mm thick plastic laminated sheet top cover, brass screws and cup washers including 1.5 Sqmm stranded copper conductor PVC insulated FRLS cable green in colour as continuous earth conductor connected to common earth and earth dolly with all accessories for one light point controlled by one switch SP one way complete all as specified and directed

All as per srl item No 2.00 here in before but One fan point controlled by one switch and regulator

All as per srl item No 2.00 here in before one bell point controlled by one bell push

All as per srl item No. 2.00 above but one light point controlled by two way switches.

All as per srl item No 2.00 here in before one socket outlet 5 Amp controlled by one switch on independent board.

All as per srl item No 2.00 here in before one socket outlet point 5 Amp on same board controlled with other switch.

All as per srl item No. 2.00 here in before but with 2.5 Sqmm (nominal area) FRLS cable for one 3 pin 15 Amp socket on independent board including 2.5 Sqmm copper conductor multi stranded green colour PVC insulated unsheathed FRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and directed.

Material and labour for point wiring for one light/fan point controlled by one switch SP one way with 1.5 Sqmm, PVC insulated but unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through existing surface/ concealed conduit and accessories and terminated in and including new sunk type pressed steel terminal switch boxes 1.6mm thick with plastic laminated bakelite sheet top cover 3mm thick make hylum fixed with nickel polished brass screws with washers and including 1.5 Sqmm stranded copper conductor PVC insulated FRLS cable green in colour as continuous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed.

All as per srl item No 9.00 here in before but One fan point controlled by one switch and regulator

All as per srl item No 9.00 here in before one bell point controlled by one bell push

All as per srl item No 9.00 here in before one socket outlet point 5 Amp on same board controlled with other switch.

All as per srl item No 9.00 here in before one socket outlet 5 Amp controlled by one switch on independent board.

All as per srl item No. 9.00 above but one light point controlled by two way switches.

All as per srl item No. 9.00 here in before but with 2.5 Sqmm (nominal area) FRLS cable for one 3 pin 15 Amp socket on independent board including 2.5 Sqmm copper conductor multi stranded green colour PVC insulated unsheathed FRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and directed.

Supply and fixing in replacement switch piano flush type, 5 Amps, 240 Volt AC single pole, one way complete all as specified and directed.

Supply and fixing in replacement switch piano flush type, 5 Amps, 240 Volt AC single pole, two way complete all as specified and directed.

Supply and fixing in replacement switch piano flush type, 15 Amps, 240 Volt AC single pole, one way complete all as specified and directed.

Supply and fixing in replacement socket out let 5 Amp, 5 pin flush type complete all as specified.

Supply and fixing in replacement socket outlet multipurpose 3 in 1, 6 pin, 5 & 15 Amps, flush type complete all as specified and directed

Supply and fixing in replacement bell push switch flush type 5 Amps, SP, 240 volts complete all as specified and directed

Supply and fixing in replacement bell electric AC (Ding Dong) 240 volt SP complete all as specified.

Supply and fixing in repair batten holder ISI marked insulated body complete all as specified.

Supply and fixing in repair LED retrofit lamp 9W, 6500K, 220-240V, B-22 base cap complete all as specified and directed.

Supply and fixing in repair ceiling rose surface type bakelite 65 x 50mm three terminal complete all as specified and directed.

Supply and fixing in repair five step socket type electronic fan regulator 300 watt single phase, including connecting complete after dismantling/ removing unserviceable regulator complete all as specified and directed.

Supply and fixing in repair city 1 new decorative wall light fixture made up of polycarbonate, suitable for lamp type 1 x 9 watt retrofit LED lamp including 9 watt LED lamp of same make as fitting complete all as specified.

Supply and fixing integral post top LED light fitting with 25 W LED IP65 protection complete all as specified and directed.

Material and labour in repair sub main wiring with PVC insulated cable copper conductor FRLS two single core 4 Sqmm drawn through PVC rigid non metallic conduit including earth continuity FRLS copper conductor 4 Sqmm PVC insulated with green insulation complete all as specified and directed. Note: Two run of copper conductor 2X4.0 Sqmm+1X4 Earth conductor including PVC pipe measured as One RM for payment purpose.

Material and labour for PVC rigid non metalic conduit fire proof medium grade ISI marked 25mm dia with fitting such as bends, tee, short piece, junction boxes with covers etc including cutting chases and making good to disturbed surfaces complete all as specified

Supply and fixing GI pipe medium grade ISI marked of size 50mm bore for cable protection including provision of PVC heavy duty bends complete for fixing along road/ floor along the pole including fittings complete all as specified.

Material and labour in repair for DB's 4 way TPN double door with bus bar of 200 Amps rated pre-fitted with MCCB as incomer, 63 Amps, four pole, 415 volts with capacity 16 KA, and MCBs SP 6-32 Amps 10 KA (as per site requirement) in outgoing circuits complete with PVC insulated FRLS copper conductor wire of suitable size, with neutral bar and earth bar complete all as specified and directed.

Material and labour for sheet metal DB for MCBs, SPN, 8 ways, double door, IP-43 company painted with 200 Amps rated bus bar, neutral bar/ connectors, earth bar/ connectors, complete with suitable copper conductor wire, PVC insulated, FRLS type with suitable copper thimbles, lugs etc. complete all as specified and directed. Note: MCB's shall be measured and paid for separately.

All as per srl item No. 33.00 above but of size 4 ways.

Material and labour for MCB SP 6 TO 32 Amps, 10 KA, B-curve complete all as specified and directed.

Material and labour for MCB SPN 6 to 32 Amps, 10 KA, B-curve complete all as specified.

Service connection with 10 sqmm twin core weather proof aluminium conductor cable suspended with No 8 SWG GI wire from pole to service bracket & then to meter including 40mm GI pipe service bracket complete all as specified and directed

Supply and fixing energy saving & environmental friendly long life versatile pressure die-cast aluminium housing luminaire with heat resistant glass and suitable optics for uniform distribution of light 15 watt LED for bldg security lights with high efficiency electronic driver, having IP-65 protection, surge protection min 2 KV power factor more than 0.95 complete operative on AC supply 140 volts to 270 volts pre-wired and product should be made in India only complete all as specified. Notes : (i) Contractor shall provide 2 years written warranty for the LED fixture complete including driver from the certified date of completion from the local office bearer of manufacturers. (ii) Contractor shall produce LM-79 & LM-80 Report of NABL accredited Laboratory duly signed by the office bearer of manufacturer.

Material and labour in replacement earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of the plate at a depth not less than 1.5 metre below normal ground level, connected with and including GI strip 32mmx6mm in and including GI pipe 50mm bore light grade as protection pipe (from top of earth plate up to the test point) by means of GI bolts, nuts, check nuts and washers of GI and thimbles, earth plate surrounded by packed layers of charcoal dust and common salt 15cm thick, all around including top and bottom and watering pipe 20mm bore of GI pipe medium grade with funnel and wire mesh, PCC chamber of size 300 x 300 x 300mm (top of chamber minimum 15 cm above the normal ground level (1:3:6) using 20mm graded stone aggregate and 50mm thick RCC cover in (1:2:4) type B-1 using 20mm graded crushed stone aggregate with 2 Nos MS handles of 12mm dia including necessary excavation/ earth work in any type of soil/rock and as shown in Electrical plate No. 3 of SSR Part-I (2009) testing on completion complete all as specified and directed. Note: If result is not achieved satisfactory, contractor will have to do re-earthing at his own cost. Nothing shall be paid extra on this account.

All as per item No. 40.00 above but GI wire 4mm dia

Taking down carefully ceiling fan of any sweep and size transporting to workshop. Dismantling blades, opening for inspection, reassembling after repair and replacement of spares and transporting back to store yard including hanging/ fixing and connecting up and testing etc complete all as specified and directed

Material and labour for rewinding of ceiling fan motor 240 volt, 50 Hz, 1200 mm sweep, any make, with super enameled copper winding wire of existing size, same No. of turns, wound with machine, providing insulation material of E-grading, varnishing, connection with flexible copper wire 0.472mm dia upto connector block complete all as specified and directed.

All as per item No. 43.00 above but 1400mm sweep

Supply only ball bearing of existing number suitable for ceiling fan 1200/1400mm sweep of different makes including necessary greasing complete all as specified and directed.

Supply only gun metal bush of existing size suitable for 1200/1400mm sweep ceiling fan complete all as specified and directed

Supply only oil filled capacitor 2.5 MFD including necessary connection complete all as specified and directed

All as per item No. 47.00 above but 3.15 MFD

All as per item No. 47.00 above but 4 MFD

Supply only down rod 15mm bore, 300mm long fixed one end with mild steel U clamp nut bolt rubber and other end threaded/ drilled hole for nut bolt split pin and check nut duly white painted suitable for all size and makes of ceiling fan complete all as specified and directed.

All as per Srl Item No. 50.00 here-in-before but 400mm long

Supply only blade of 1200mm sweep of ceiling fan complete all as specified and directed.

Supply only blade of 1400mm sweep of ceiling fan complete all as specified and directed.

Material and labour for painting one coat of synthetic enamel paint (white) on the surface of ceiling fan of 1200/ 1400mm sweep complete after preparation of surface including filling cavities with filler, cleaning dust and dirt all as specified and directed

Supply only U clamp with rubber reel insulator with nuts bolts of size 10mm dia, 75mm long including necessary washer and split pin complete all as specified and directed.

Supply only ceiling fan hook including nuts, bolts and rubber reel complete all as specified and directed.

Supply only top and bottom canopy of plastic with steel screw suitable for fan of 1200/ 1400mm sweep complete all as specified and directed.

Taking down carefully exhaust fan of any sweep and size and transporting to workshop. Dismantling blades, opening for inspection, reassembling after repair and replacement of spares and transporting back to store yard including hanging/ fixing and connecting up and testing etc complete all as specified and directed

Material and labour for rewinding motor of exhaust fan 450mm sweep with super enameled copper wire of existing specification, gauge and weight including insulating material complete all as specified and directed

All as per Srl Item No. 59.00 here-in-before but 380mm sweep

All as per Srl Item No. 59.00 here-in-before but 300mm sweep

All as per Srl Item No. 59.00 here-in-before but 225/230mm sweep

Supply only ball bearing of existing exhaust fan suitable for 450mm sweep including necessary greasing complete all as specified and directed

Supply only ball bearing of existing exhaust fan suitable for 200 to 380mm sweep including necessary greasing complete all as specified and directed

Supply only mounting legs with rubber suitable for any type of exhaust fan complete all as specified and directed

Taking down carefully air circulator of any sweep and size and transporting to workshop. Dismantling blades, opening for inspection, reassembling after repair and replacement of spares and transporting back to store yard including hanging/ fixing and connecting up and testing etc complete all as specified and directed

Material and labour for rewinding motor of air circulator 450mm sweep with super enameled copper wire of existing specification, gauge and weight including insulating material complete all as specified and directed

All as per Srl Item No. 67.00 here-in-before but 600mm sweep

Supply only ball bearing of existing number suitable for air circulator 450mm sweep of different makes including necessary greasing complete all as specified and directed.

Supply only ball bearing of existing number suitable for air circulator 600mm sweep of different makes including necessary greasing complete all as specified and directed.

Supply only gun metal bush of existing size suitable for air circulator complete all as specified and directed.

KAMAL AGGARWAL

UNITED ENGINEERING CORPORATION

GULSHAN SINGH GHAI AND SON

SUNRISE ENGINEERS AND CONTRACTOR

J.K & Company