NIT No GE/ND-28/2025-26

Amount

Taking down carefully old point wiring (Light / Fan/ Socket/ Bell Point) with aluminium/ copper conductor cable complete including fittings such as ceiling rose, holders, regulators, bell, switch and socket from existing concealed conduits/ casing caping and making good the disturbed surface of wall/ floor complete to match with the existing surface/ finishes complete all as specified and directed.

M&L for Point wiring for one light point controlled by one, one way 6 Amp switch with 1.5 sqmm PVC insulated and unsheathed copper conductor multistranded 1100 volts grade, ISI marking drawn thorugh and new non metallic PVC rigid concealed conduit and conduit accessories, medium grade, ISI marking, concealed Frame for fixing switches, sockets, inculding one run of 1.5 sqmm PVC insulated unsheathed copper cable FRLS grade as in earth wire for continuity and connecting to earth dolly for one light point controlled by one switch complete including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the wall (wash/ paint/ distemper) wherever required (as per the existing condition) complete all as specified and directed. Note: The cost of modular metal flush box and Modular white Cover Plate with Frame, MS terminal boxes and blank plate if required shall be deemed to be included in the unit rate.

All as per item No 02.00 above for one fan point controlled by one, one way 6 Amp switch complete all as specified and directed.

All as per item No 02.00 above but for one bell point controlled by one, one way 5 Amp switch complete all as specified and directed.

All as per Item No 02.00 above but for one light point controlled by two, two way switches complete all as specified and directed.

All as per Item No 02.00 above but for One 3 pin 5 Amp socket outlet on the same board complete all as specified and directed.

All as per Item No 02.00 above but for One 3 pin 5 Amps socket outlet on independent board complete all as specified and directed.

All as per Item No 02.00 above but with 2 x 2.5 Sqmm + 1 x 2.5sqmm Copper conductor cable for one 3 pin, 15 Amps Switch socket out let on independent board complete all as specified and directed.

All as per Item No 02.00 above but with 2.50 sqmm single core multistranded copper conductor cable for 4x1 number 3/5 pin 6/16 Amp socket outlet on independent board complete all as specified and directed.

All as per Item No 02.00 above but with 2.50 sqmm single core multistranded copper conductor cable for 2x1number 3/5 pin 6/16 Amp socket outlet on independent board complete all as specified and directed.

M&L for Point wiring for one light point controlled by one, one way 6 Amp switch with 1.5 Sqmm multi stranded copper conductor 1100 V grade, ISI marked , PVC insulated unsheathed cable (with approved colour code) FRLSH cable drawn in & including PVC casing caping of 20/32 mm wide, with double locking type, including all accessories casing caping as approved by EIC, with PVC 1.5 mm multi stranded insulated unsheathed copper wire, ISI marked of green colour for continous earth, including PVC terminal box and PVC board making good disturbed surface to match with the existing surface controlled by one switch laminated hylem sheet if required shall be deemed to be included in the unit rate complete all as specified and directed.

All as per Item No 11.00 above but for one fan point controlled by one, one way 6 Amp switch complete all as specified and directed.

All as per Item No 11.00 above but for one bell point controlled by one 5 amp switch complete all as specified and directed.

All as per Item No 11.00 above but for one light point controlled by two two way switches complete all as specified and directed.

All as per Item No 11.00 above but for One 3 pin 5 Amp socket outlet on the same board complete all as specified and directed.

All as per Item No 11.00 above but for One 3 pin 5 Amps socket out let on independent board complete all as specified and directed.

All as per Item No 11.00 above but with 2 x 2.5 Sqmm + 1 x 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps Switch socket out let on independent board complete all as specified and directed.

All as per Item No 11.00 above but with 2.50 sqmm single core multistranded copper conductor cable for 4x1 number 3/5 pin 5/15 Amp socket outlet on independent board complete all as specified and directed.

All as per Item No 11.00 above but with 2.50 sqmm single core multistranded copper conductor cable for 2x1 number 3/5 pin 5/15 Amp socket outlet on independent board complete all as specified and directed.

S&F in repair modular switch flush type, 6 Amp. SP, one way ,1 module complete all as specified and directed.

S&F in repair modular switch flush type, 6 Amp. SP, two way ,1 module complete all as specified and directed.

S&F in repair modular socket outlet, 3 pin, 6 Amp, flush type 2 module complete all as specified and directed.

S&F in repair modular switch, 16 Amp flush type 1 module complete all as specified and directed.medal/Panasonic/Schneider/Seimens

S&F in repair modular socket outlet, 2/3 pin, 6/16 Amp flush type 2 module complete all as specified and directed.

S&F in repair modular bell push, flush type, 5 Amp,1 module complete all as specified and directed.

S&F in repair modular Fan Regulator step type 2 module ,120W complete all as specified and directed.

S&F in repair modular AC BOX suitable for load current 16 Amp 230 Volts AC complete all as specified and directed.

S&F in repair switch piano type, 5 Amp. SP, one way complete all as specified and directed.

S&F in repair switch piano type, 15 Amp. SP, one way complete all as specified and directed.

S&F in repair switch two way switch flush type, 5 Amp complete all as specified and directed.

S&F in repair socket outlet, 2 in one 3 pin, 5 Amp, piano type complete all as specified and directed.

S&F in repair socket outlet, 2 in 1, 5 pin, 5/15 Amp flush type universal complete all as specified and directed.

S&F in repair switch socket outlet combination, 2 in one 3 pin, 5 Amp, piano type complete all as specified and directed.

S&F in repair switch socket combination 2 in 1, 5 pin 5/15 Amp flush type universal complete all as specified and directed.

S&F in repair Electronic fan regulator,100W ,230V ,50Hz stepped socket type for ceiling fan complete all as specified and directed.

S&F in repair switch bell push, flush type, 5 Amp complete all as specified and directed.

S&F in repair bell, AC, 230 V, SP, ding dong type complete all as specified and directed.

S&F in repair Ceiling rose 3 phase, PVC/ Polycarbonate body complete all as specified and directed.

S&F angle bulb holder for LED fitting including taking down old unserviceable type holder complete all as specified and directed.

M&L for painting of fan (ceiling fan/ exhaust fan/ wall mounted fan) any sweep with applying one coat of synthetic enamel paint (Ceiling Fan -White Paint and Exhaust fan - Gray Paint ) by spray machine including preparation of old painted surfaces with filling of cavity by filler with and including writting of MES No. of fan in capital letters with black synthetic enamel paint of height not less than 20mm on fan body in approved pattern complete all as specified and directed.

S&F in repair louver shutter made out GI sheet (Thickness of louver shutter Body 1mm ,shutter Fins 0.5 mm fixed with 3 mm GI wire) for Exhaust fan 150/300mm sweep including proper fixing with screw in wall at existing Hole complete all as specified and directed.

S&F in repair Down rod 15mm bore medium grade GI pipe including cut in required length and drilled as per existing size complete all as specified and directed.

S&F in repair Fan blade for Ceiling fan of 1200mm sweep of white colour complete all as specified and directed.

S&F in replacement canopy for ceiling fan complete all as specified and directed.

Taking down old unsv submain wiring of any size complete all as specified and directed.

M&L for sub main wiring with two run of 4.0 Sqmm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 4 Sqmm drawn through PVC Casing Caping and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/ paint/ distemper) wherever required (as per the existing condition), complete all as specified and directed. Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length.

All as per item No 46.00 but for 2x6.0 sqmm + 1x6.0sqmm earth wire complete all as specified and directed.

All as per item No 46.00 above but for 2x10.0 sqmm + 1x10.0sqmm earth wire complete all as specified and directed.

S&F in replacement LED tube light fitting 1x 20 watts, 220 volts AC, 1200mm, with Aluminium housing & integrated electronic driver complete with driverwith polycarbonate diffuser & thd, 10 % including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in replacement LED light with high output diffuser 2 feet, 10 watts, 220 volts AC decorative type complete with driver, holders & including suitable LED lamp including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement LED luminaire 600 x 600 x2 mm, (2'x2') 36 watts, 220 volts AC Recess/ Surface mounted downlighter type with high efficiency PMMA diffuser, soft glare free light complete with suitable driver, holders & including suitable LED lamp suitable for POP/ Gypsum/ roof ceiling including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose including cutting of false ceiling in suitable size & making good the disturbed surface and matching with the existing surface complete all as specified and directed.

S&F in replacement LED luminaire 1180x280x70 mm (4'x1'), 30 watts,cool white 220 volts AC Recess/Surface mounted downlighter type with high efficiency PMMA diffuser, soft glare free light complete with suitable driver, holders & including suitable LED lamp suitable for POP/Gypsum/roof ceiling including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose including cutting of false ceiling in suitable size & making good the disturbed surface and matching with the existing surface complete all as specified and directed.

S&F in replacement LED luminaire Recess/ Surface mounted downlighter (Round/ Square)r with pressure die cast alluminium heat sink & PC diffuser round shape 15 /18 watts warm white/cool white, 220 volts AC,Cut out dia 6 inch finished in white white powder coated complete with integrated driver, holders & including suitable LED lamp including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose including cutting of false ceiling in suitable size & making good the disturbed surface & matching with the existing surface complete all as specified and directed.

S&F in replacement of 8W LED outdoor new generation landscape lighting fitting Bambo type with 1mtr length IP 65 protection including base to stand alone complete all as specified and directed.

S&F in replacemnt of LED decorative garden post top lantern cap 15 watts with opal acryliwith IP 65 protection warm white Cylindrical LED bollard rings contemporary style and unique design toghter for indirect glare- free lighting. including making all connection using 3 core copper flexible cable drawn through in PVC conduit (if required) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs recessed/ surface spot/ tilled light white LED light with modern design compact size with LED 15W to povide focussed light complete all as specified and directed.

S&F in replacement Engagement light LED type with Red and Green compartment 230 volts with LED lamp 9 watt complete all as specified and directed.

S&F in replacement 5 W LED coloured Adore Lamp B22 Red and green suitable for bulb holder in engagement lights complete all as specified and directed.

S&F in replacement LED bulb 9W complete all as specified and directed.

S&F in replacement warm white LED light fitting suitable for mounting on photo frame consisting of 9 watt LED strip warm white 230 volts complete all as specified and directed.

S&F in replacement warm white LED light fitting suitable for mounting on photo frame consisting of 2 Nos LED candle lamp 3 watt warm white 230 volts complete all as specified and directed.

S&F in replacement of hanging table lamp ceiling mounted spring type (adjustable) warm/cool white complete all as specified and directed.

S&F in replacement road/ security light/ bldg light with high power LED fitting as light source ,energy saving envoirmental friendly 60 W with advance features all as complete with fixing arrangement such as GI pipe brakets bend in 120 degree, clamps made out by GI strip suitable for steel or PCC poles, nuts, bolts and washer to be fixing including making all eclectrical connection with three core flexible copper cable etc complete all as specified and directed.

S&F in replacement ceiling fans complete with blades, down rods, accessories, 230 V, 1200 mm sweep, Min air delivery 230 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) ceiling fan with remote of color white or (as per site requirment) complete with all accessories internally pre wired and including connecting up with three core flexible copper conductor cable with suitable size and making arrangement to hanging of fan to ceiling with proper hook nut bolt complete all as specified and directed.

Supply and fixing in replacement METALIC EXHAUST fans AC single phase 230/240 V of size 300 mm sweep (as per sample) complete all as specified and directed.

Supply and fixing in replacement METALIC EXHAUST fans AC single phase 230/240 V of size 225 mm sweep (as per sample) complete all as specified and directed.

Supply and fixing in replacement PVC body ventilation fans AC single phase 230/240 V of size 250 mm sweep (as per sample) complete all as specified and directed.

Supply and fixing in replacement PVC body ventilation fan 300mm Sweep, 240 Volt, AC 50 HZ, plastic body including louvers with and including cutting bricks/ stone boulders wall for fixing of fan and finished the cutting surface even and smooth by using cement morter complete all as specified and directed by Engineer in charge.

Supply and fixing in replacement of wall fan 400mm (16 inch) 60 watt Oscilating wall fan (KD white) wall mounted speed 1350 RPm including cutting bricks/stone boulders wall for fixing of fan and finished the cutting surface even and smooth by using cement morter complete all as specified and directed.

Supply and fixing in repairs of cordless bell electronic type 230 volts AC complete all as specified and directed.

Supply and fixing in repairs of remote controlled bell electronic type 230 volts AC complete all as specified and directed.

Supply and fixing in repairs of Plug Top 15 Amps, 230volts AC, 3-pin complete all as specified and directed.

Supply and fixing in repairs of Plug Top 5 Amps, 230volts AC, 3-pin complete all as specified and directed.

S&F in repair Capacitor (2.5-4) MFD for ceiling fan/ Exhaust Fan of any make, any model and any sweep complete all as specified and directed.

S&F in repair motor starter single phase for AC of any make, any model and any capacity complete all as specified and directed.

S&F in repair bed switch 5 Amp any make, any model complete all as specified and directed.

S&F in repair laminated sheet or hylam sheet for mounting, switches, sockets, fan regulator etc. of any size as per site requirement complete all as specified and directed.

S&F in replacement three core 1.5 sqmm PVC service cable having copper strands completet all as specified and directed. Note: fixing the cable with clamp / shaddles included in the quoted rate

S&F in replacement motor for ventillation fan of size upto 250 mm, copper wounded complete all as specified and directed.

S&F in replacement remote suitable for existing BLDC fan, make as per existing sample complete all as specified and directed.

M&L for detecting faults in LT electric supply distribution system in various offices complex and rectifiying the defects for restoring supply including replacing of unserviciable defective electrical accessories complete all as specified and directed. Note: (i) Spares shall be measured and paid under respective item of schedule . (ii) Essential material like, complain slip book, insulation tape, screws, wodden/ plastic gutka and all tools required for carrying out the works and insutruments to the defect fault shall be deemed to be included in the quoted rate.

S&F in replacement PVC wire 1.5 Sqmm of FRLS PVC insulated copper conductor, single core cable drawn through existing PVC conduit of 20 mm dia bore with all fittings accessories complete all as specified and directed.

S&F in replacement PVC wire 2.5 Sqmm of FRLS PVC insulated copper conductor, single core cable drawn through existing PVC conduit of 20 mm dia bore with all fittings accessories complete all as specified and directed.

S&F in replacement PVC gang box with Cover plate 2/3 module suitable for fitting one 5 A switch and one 5 A socket complete all as specified and directed. Note : no of switches and socket required are included in the quoted rate

S&F in replacement PVC gang box with cover four module suitable for fitting one 15A switch and one socket complete all as specified and directed. Note : no of switches and socket required are included in the quoted rate

S&F in repair for PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep complete all as specified and directed.

All as per Item No 88.00 above but for size of 175mm x 100mm x 50mm deep complete all as specified and directed.

All as per Item No 88.00 above but for size of 200mm x 105mm x 50mm deep complete all as specified and directed.

All as per Item No 88.00 above but for size of 250mm x 200mm x 50mm deep complete all as specified and directed.

S & F in repair PVC casing caping of any size complete all as specified and directed.

S&F GI Raceway made from 1.5mm thick pregalvanized sheet for top, bottom & sides and complete with top cover with rubber gasket of size 100x38mm complete for mounting and supporting the cable tray system, along with vertical bends, including taking down and refixing and type of electric/signal cable, if require through wall/ floor cutting and making good surface of disturbed area, complete all as specified and directed.

S&F in repair GI bracket for raceway mentioned in above item here-in-before of 100mm width, complete all as specified and directed.

S&F in repair coupler for raceway of 100 mm width complete all as specified and directed.

S&F in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps concealed in wall complete all as specified and directed.

S&F in replacement for sheet metal enclosure TPN DB-VTPN 4 way 415 V, double door, 200 A copper bus bar, IP 43, Suitable for 63-125 Amp MCCB as incomer as flush mounted complete all as specified and directed.

S&F in replacement for sheet metal enclosure TPN DB-VTPN 8 way 415 V, double door , 200 A copper bus bar , IP 43 , Suitable for 63-125 Amp MCCB as incomer as flush mounted complete all as specified and directed.

S&F in replacement for sheet metal enclosure TPN DB- 4 way 415 V, double door, 200 A copper bus bar, IP 43,Suitable for 63-125 Amp MCCB as incomer as flush mounted complete all as specified and directed.

S&F in replacement of factory made concealed sheet steel distribution boards, double door, SPN, 4 way, 230 volts AC, IP 43 with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified and directed.

S&F in replacement of factory made concealed sheet steel distribution boards, double door, SPN, 8 way, 230 volts AC, IP 43 with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified and directed.

S&F in replacement of factory made concealed sheet steel distribution boards, double door, SPN, 12 way, 230 volts AC, IP 43 with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified and directed.

S&F in repair MCB TPN 40-63 Amps, C series, 10 KA "B" series 415 Volt complete all as specified and directed.

S&F in repair MCCB 4 Pole 415V Fixed type 80-100A with breaking capicity 16 KA complete all as specified and directed.

S&F in replacement of MCB SP 6-32 Amp, 10kA complete all as specified and directed.

S&F in replacement of moduler MCB SP 16 Amp,240V 3kA, C Curv, fitted in main switch board including 2.5 sqmm wire connecting socket & modular MCB complete all as specified and directed.

S&F in replacement of MCB SPN 20-32 Amp, 10kA complete all as specified and directed.

S&F in repair MCB DP 40 Amps, C series, 230 Volts complete all as specified and directed.

M&L in replacement for maintenance free chemical earthing with enviornment friendly earthing system consisting of 40 mm dia M S earth eletrode with electrolytic grade copper coating of 3 mtr length, to be lowered in 150 mm dia bore including filling backby earth enhancing compound (10 kg x 3 bag) minimum and the top of the bore shall be finished with FRP pit cover of suitable size. Earth resistance should be less than 1 ohm complete all as specified and directed. Note: Earth work , earthing chamber with cover of FRP and testing of earthing will be deemed to be included in quoted rate.

M&L in replacement Earthing complete with GI earth plate electrode 60cmX60cmX6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connecting to galvanized earth wire 4mm dia as earthing conductor by means of bolts, nuts, check nuts and washers of GI and all as shown in Electrical plate No.3 of SSR Part I and including testing on completion all as specified locations and as directed by the Engineer-in-Charge. Note: (i) The above quoted rate shall include cost of main earthing wire 4mm dia charcoal, salt, excavation and earth work in any type of soil CI cover, funnel with 20mm dia light grade GI water pipe including GI protection pipe 15mm dia light grade for earth strip etc. (ii) The cost of earth pit is deemed to be included in the unit rate. 3. The cost of taking down old unsv earthing with all its accessories is deemed to be included in the unit price.

S&F in replacement Earth continuity conductor or main earthing lead fixed to valve on batten or recess or chases or burried in ground or drawing in conduit or any other situation for loop earthing etc as reqd copper strips of size20 mmX3mm complete all as specified and directed by Engr-in-Charge. Note: (a) Srl Item No 02.00, 07.00, 08.00, 11.00, 16.00, 17.00, 20.00, 26.00, 28.00, 33.00, 35.00, 37.00, 46.00, 47.00, 49.00, 50.00, 52.00, 58.00, 61.00, 62.00, 65.00 to 68.00, 70.00, 71.00, 77.00, 84.00, 85.00, 93.00, 98.00, 99.00, 102.00, 103.00, 105.00, 106.00 & 110.00 to 112.00 of BOQ are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody. (b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge.

J B ELECTRICALS (BID ID -3380049)

SNOWY ENGINEERING INC (BID ID -3379875)

B Kumar and Co (BID ID -3380453)

RAJDHANI ENTERPRISES (BID ID -3380501)

BEHAL TRADERS (BID ID -3380511)