PROVN OF CERTAIN B/R AND E/M WORKS AT AF STNS UNDER GE (AF) CHABUA

Amount

SCH 'A' PART-I

Supply & fix exhaust fans AC single phase 230/240 V of size 230 mm sweep with louvers complete all as specified and directed. Model:- Havells Ventil Air DSP or equivalent in approved make.

Supply & fix exhaust fans AC single phase 230/240 V of size 380 mm sweep with louvers complete all as specified and directed. Model:- Havells Turbo Force TP or equivalent in approved make.

M&L for cutting of holes on wall for exhaust fan of any size and making smooth surface complete all as specified and directed.

M&L for point wiring with 1.5 sqmm PVC insulated copper cable 1100 volts grade multi stranded copper conductor cable drawn through and including PVC casing and capping complete with all fittings and accessories including MS box of thickness 1.6mm and hylem sheet cover of 3 mm thick for mounting of switches, sockets, regulators, etc and 1.5 sqmm multi stranded PVC unsheathed copper cable for earth continuity for one fan point controlled by one switch complete all as specified and directed.

All as per item No. 4 here in before but with 2.5 Sqmm copper wire for power point complete all as specified and directed.

Supply and fix switch piano flush type, 5 Amps 240 volts single pole one way complete all as specified and directed.

S&F ceiling rose surface backelite three terminals, PVC/polycarbonate, insulated body complete all as specified and directed.

S&F switch socket combination 5/15 amps, 5 in 1, flush type on independent board complete all as specified and directed.

Supply and draw sub main wiring with two single core 4 sqmm FR PVC insulated copper cable 1100 volts grade multistranded, unsheathed conductor drawn into FR PVC casing and capping and all necessary fittings including 4 sqmm multi strand FR PVC insulated copper wire for earth continuity conductor connected to common earth dolly complete all as specified and directed.

M&L for MCB single pole, 'C' curve, 10 KA, 6 - 32 amps complete all as specified and directed.

M&L for MCB single pole & neutral 'C' curve, 10 KA, 32 amps complete all as specified and directed.

Supply & fixing SPN DB 4 ways IP 43 metal door conforms to IS 8623-1 & 3, ICE 61439-1&3 complete all as specified and directed.

Supply & fixing SPN DB 6 ways IP 43 metal door conforms to IS 8623-1 & 3, ICE 61439-1&3 complete all as specified and directed.

Supply & fixing SPN DB 8 ways IP 43 metal door conforms to IS 8623-1 & 3, ICE 61439-1&3 complete all as specified and directed.

SCH 'A' PART-II

Supply & fix wall mounted fans AC single phase 230/240 V of size 300 mm sweep with all accessories complete all as specified and as directed. Model:- Usha Model Mist Air or equivalent in approved make.

M&L for point wiring with 1.5 sqmm PVC insulated copper cable 1100 volts grade multistranded copper conductor cable drawn through and including PVC casing and capping complete with all fittings and accessories including MS box of thickness 1.6mm and hylem sheet cover of 3 mm thick for mounting of switches, sockets, regulators, etc and 1.5 sq mm stranded PVC unsheathed copper cable for earth continuity for one fan point controlled by one switch complete all as specified and directed.

Supply and fix switch piano flush type, 5 Amps 240 volts single pole one way complete all as specified and directed.

S&F ceiling rose surface backelite three terminals, PVC/polycarbonate, insulated body complete all as specified and directed.

SCH 'A' PART-III

Provision of LED flood light mounted on street light pole of capacity 120 watts energy saving environmental friendly long life, exclusive innovative die-cast aluminium IP 66 suitable for general purpose lightening, complete all as specified and directed.

M&L for junction box out door type of 1.6 mm MS sheet with hinged door and locking arrangement painted over a coat of red oxide primer comprising of 4 way, 20 Amp capacity connector 1 No and MCB SP 2 to 6 Amps 1 No complete all as specified and directed.

Supply and fixing steel tubes, galvanized, light grade, ISI marked 50mm bore for protection of cable under floor, road and on wall complete all as specified and directed.

Supply laying & testing of XLPE insulated, armoured, heavy duty electric under ground cable with stranded aluminium conductor, 1100 volts grade, laid in trenches, sleeving through pipes or fixed on poles & walls or laid under floors including jointing with suitable size aluminium lugs complete of size 25 Sqmm nominal cross section x3.5 core complete all as specified and directed.

Excavation in trenches in soft/loose soil n.exc 1.5m wide and n.exc 1.5 m in depth for foundation or shafts, wells cesspit, manholes, pier holes, cable laying, sewage/water lines etc complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n exc 25cm complete all as specified and directed.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

Material and labour for sand cushioning with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming complete all as specified and directed.

M&L for old size sub class ‘B’ bricks, laid in trenches as cable covers complete all as specified and directed.

Supply and fixing steel tubes, galvanized, light grade, ISI marked 50mm bore of length 1 mtr for mounting of flood light including necessary drilling and grouting required for foundation of pipe complete all as specified and directed.

SCH 'A' PART-IV

Drilling vertical bore upto 90 ft manually/mechanically suitable for 40 mm dia GI pipe complete all as specified and as directed.

Supply and fix cast iron complete hand pump set complete all as specified and as directed.

Supply fixing commissioning and testing of 0.5 hp pump set on a raised platform covered with shed for pump set complete all as specified and as directed.

Supply, laying, and testing galvanized iron pipes of 40 mm bore medium grade with ISI Marked with all necessary fittings (such as bends, elbows, tees, short pieces of medium grade pipe, connectors, back-nuts, caps, plugs and unions etc.) cutting pipes, screwing, and for making forged bends on piping as required, complete all as specified and as directed.

Supply, assembling, lowering and fixing in vertical position in bore well, unplasticised PVC medium slotted pipe of 40 mm diameter (Internal), including fittings & accessories etc for all depths complete all as specified and directed.

Supply, laying, and testing galvanized iron pipes of 25 mm bore medium grade with ISI Marked with all necessary fittings (such as bends, elbows, tees, short pieces of medium grade pipe, connectors, back-nuts, caps, plugs and unions etc.) cutting pipes, screwing, and for making forged bends on piping as required, complete all as specified and as directed.

Supply and fixing 25 mm bore dia Gun-metal, gate valves, with iron wheel head, screwed both ends on G.I pipes with GI union, complete all as specified and all as directed.

Supply, laying, and testing of PVC insulated, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 sqmm 2 Core complete all as specified and as directed.

Supply and fixing isolator SPN of capacity upto 40A single phase 240 V, complete all as specified and all as directed.

SCH 'A' PART-V

M&L for mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes, complete all as specified and directed.

M&L for mild steel in flat, round or square bars, in available lengths, complete all as specified and directed.

M&L for preparation of newly steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

SCH 'A' PART-VI

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius in half brick thick wall built in CM 1:4 complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for styles and plain colour PVC sheet for top rail ,lock rail & bottom rail on either sides and as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded -sealed to the styles & rails with suitable PVC sheet beading, and joint together with solvent cement complete all as specified and as directed.

S & F Stainless Steel but hinges 75mm size medium weight, complete all as specified and as directed.

S&F 150mm long anodized aluminium handles, cast type, complete all as specified and as directed.

S&F for 150mm long anodized aluminium barrel tower bolt of extruded section complete all as specified and as directed.

S&F GI tubing 15mm dia medium grade with all fittings and fixed to wall, floor and ceiling etc complete all as specified and as directed.

Cutting chases pinning in, making good to facing where required & pointing in CM 1:3 for concealed water tubing not exc 10 CM girth in brick wall complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 350x250x7mm/ 450 x 300 x 7mm thick for work on vertical surface such as skirting, dado, set & jointed neat in cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM (1:4) as backing coat and including dismantling of existing tiles and cement mortar bedding complete all as specified and as directed.

M&L for Non-skid ceramic coloured tiles 7 to 8mm thick square/rectangular area of each tile exc 0.11 sqm but nexc 0.18sqm, in floors etc and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tile over 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

S&F vitreous china wash down water closet pan (pedestal pattern) coloured (including two Nos fixing bolts incl PVC seat cover but excluding flushing cistern and flush pipe) complete including making good to floor with and including fixing of P or S trap, complete all as specified and as directed.

S&F vitreous china wash hand basin white flat back size 550 x 400 mm excluding taps waste chain, plug and porcelain stopper but including bracket, waste pipe and 32mm dia brass waste coupling/fitting complete all as specified and as directed.

Supply and fixing Vitreous China Urinal, Half Stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.

S&F 10 litre capacity PVC valve less syphonic action type flushing cistern low level, white, with inlet, ball valve, float and handle including brackets and long bend complete all as specified and directed.

S&F 15mm dia pillar taps cast copper alloy with capstan heads, chromium plated screwed down high, pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F 15 mm dia bore bib taps cast copper alloy with, chromium plated fancy type with long shank & cup, capston head, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

S & F 15 mm dia bore cast copper alloy chromium plated angle cock /stop cock screwed down high pressure with capstan head, screwed both ends for iron pipes or for union and fixed, complete all as specified and as directed.

S & F 15mm dia bore Concussive push button taps of cast copper alloy, screwed for iron pipe and fixed, complete all as specified and as directed.

S&F brass chromium plated over head shower rose for 125 mm size with long body fancy type including fixing to steel pipe or union complete all as specified and as directed.

S&F chromium plated health faucet 8mm dia 1 mtr long cp flexible tube with wall hook and jet suitable for 15 mm bore pipe or for union and fixed complete all as specified and as directed.

S&F for Cast iron soil, waste and vent pipes100 mm, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F 100 mm dia CP grating incl joints with solvent cement complete all as specified and directed.

S&F toilet paper holder, twin type CP fixed to wall with chromium plated brass screws and rawl plugs complete all as specified and directed.

M&L for rendering 15mm thick plaster in CM (1:6) on brick or concrete surfaces finished even & smooth, complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coat of oil bound distemper including making good the surface by filling with 3mm wall care putty making surface even and smooth, complete all as specified and as directed.

S&F CP towel ring 20 cm dia fixed with CP screws and wood cleats / rowel plug with wall, complete all as specified and as directed.

S&F low density polyethylene (LDPE) pipe of pressure rating 6 Kg/Sqcm for 50 mm bore complete all as specified and as directed.

S&F soap dish, brass, chromium plated fixed to wall with brass chromium plated screw, complete all as specified and as directed.

S&F sheet glass shelf consisting of 5.5mm thick sheet glass self assembly 12cm width with chromium plated guard and railing 45cm long, complete all as specified and as directed.

S&F CP towel rail 20 mm dia D type, 60 cm long fixed with CP screws and rowel plug in wall, complete all as specified and as directed.

S&F for 3 tier acrylic corner shelf fixed in position complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including retrofit LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed.

M&L for point wiring with 1.5 sqmm PVC insulated copper cable 1100 volts grade multistranded copper conductor cable drawn through and including PVC casing and capping complete with all fittings and accessories including MS box of thickness 1.6mm and hylem sheet cover of 3 mm thick for mounting of switches, sockets, regulators, etc and 1.5 sq mm stranded PVC unsheathed copper cable for earth continuity for one fan point controlled by one switch complete all as specified and directed.

Supply and fix switch piano flush type, 5 Amps 240 volts single pole one way complete all as specified and directed.

S&F ceiling rose surface backelite three terminals, PVC/polycarbonate, insulated body complete all as specified and directed.

Supply and draw sub main wiring with two single core 4 sqmm FR PVC insulated copper cable 1100 volts grade multistranded, unsheathed conductor drawn into FR PVC casing and capping and all necessary fittings including 4 sqmm multi strand FR PVC insulated copper wire for earth continuity conductor connected to common earth dolly complete all as specified and directed.

Supply & fixing SPN DB 4 ways 240 volts double door complete all as specified and directed.

M&L for MCB single pole & neutral 'C' curve, 10 KA, 40 amps complete all as specified and directed.

M&L for MCB single pole, 'C' curve, 10 KA, 6 - 32 amps complete all as specified and directed.

SCH 'A' PART-VII

Material and labour for Earthing complete with Galvanized Iron earth plate electrode of size 600mmX600mmX6mm thick burried vertically in ground with top edge of earth plate not less than 1.5 metre below normal ground level (depth of pit not less than 2.25 metre below normal ground level), earth plate surrounded from all sides by 15cm thick packed alternate layers of charcoal dust and common salt, electrode connections by using galvanized iron strip of size 32x6mm thick (upto body of equipment) by means of GI bolts, nuts, check nuts & washers, connected to main switch board or main control board, protected by galvanized iron pipe light grade 40mm bore, and watering pipe 20mm bore GI medium grade with funnel & wire mesh including all necessary excavation & earth work, PCC chamber in PCC (1:2:4) type B-1 using 20mm graded crushed stone, RCC cover (In lieu of CI Cover), all as shown in electrical plate No-3 of MES Standard Schedule of Rates (Part-I, 2009), testing on completion including test point terminal block, complete all as specified and directed.

Supply, installing, commissioning and testing LT panel board, factory made, out door, cubical type, vermin proof dust proof, water proof made out of 3.15 mm thick CRCA sheet and inner sheet of 2.00 mm thick and angle iron frame of size 50x50x5mm inside depth not less than 50 cm and size suitable to accommodate the following accessories, with insulated aluminum busbar 200 Amps capacity, 3 phase, 4 wire system, both sides openable (front and back) locking arrangement with CPRI approved, including cable trench duly painted with power coated with RAL 7032 internally and externally connecting exiting cable with lugs including internal wiring with copper cables of suitable size using lugs comprising the following accessories all as directed. INCOMING:- (i) MCCB 4 Pole 63 Amp with breaking cap 25 KA -01 Nos OUTGOING:- (ii) MCB single pole & neutral 'C' curve 10 KA, 32 Amps -03 Nos (iii) Voltmeter (digital type (0 to 500 ) -01 volts (iv) Ammeter (digital type) with CTs 0-300 Amps -01Nos. (v) phase indication lamps LED type RYB -01 set (Set of three) Notes:- The rate quoted shall include for earth work and excavation for angle iron frame for foundation of panel board up to 0.50 m below GL in any type of soil and PCC 1:4:8 type D2 filling in foundation. The ground clearance of panel board shall be 0.4 m from GL to the bottom of panel board.

M & L for under ground LT Cable XLPE insulated heavy duty armoured sheathed 1100 volts grade of cross sectional area 35 Sqmm, 3.5 core, with aluminium conductor, along with suitable size aluminium cable lugs and jointed in any description complete all as specified and directed.

M & L for under ground LT Cable XLPE insulated heavy duty armoured sheathed 1100 volts grade of cross sectional area 16 Sqmm, 2 core, with aluminium conductor, along with suitable size aluminium cable lugs and jointed in any description complete all as specified and directed.

Excavating in trenches n exc 1.5m wide and n exc 1.5m deep and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n exc 25cm complete all as specified and directed.

Removing excavated soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed.

Supply & laying reinforced precast concrete cable cover class LV type 1 flat size 250mm x150mmx40mm all as specified and as directed.

Material and labour for sand cushioning with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming completed all as specified and directed.

SCH 'A' PART-VIII

Excavation in post holes (or similar holes) in soft/loose soil each not exc 0.50 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm watering and removing surplus soil to a distance not exc 50 m and making good surface. complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (40 mm graded stone aggs) as in foundation, filling and mass concrete for posts/strut complete all as specified and directed.

S & F rolled mild steel work in tubular trusses, rafters, purlins, posts , flat sections etc incl necessary welding/fabrications using Fe 410-W (Gde E-250 Quality- A) complete all as specified and directed.

M&L for mild steel bolt (Machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwes end to be fitted with washer and one hexagonal or square nut, n. exc 5 cm long and dia 11 to 15 mm, complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or 'J' / 'L' hooks all as specified and directed.

All as per item No. 96 but plain sheet as in ridges, gutters, facia board etc, complete all as specified and directed.

M&L for preparation of newly steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Surface excavation n. exc 30 cm deep and average 15 cm deep in soft / loose soil getting out complete all as specified and as directed.

Removing excavated soil to a distance n. exc 50 m and depositing where directed at a level n. exc 1.5 m ht.se soil getting out complete all as specified and as directed.

M & L for Hardcore of gauge n. exc. 63 mm, deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100 mm thick PCC (1:4:8) type D-2 using 40 mm graded coarse aggregate in sub base under flooring complete all as specified and as directed.

M & L for 75 mm thick plain cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate in flooring complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:6 complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick wall or concrete surface fair & even in CM 1:4 complete all as specified and as directed.

M&L for three coats of white wash on newly plastered surface of wall including preparation of surface, complete all as specified and as directed.

SCH 'A' PART-IX

M&L for point FRLS/LS wiring with 1.5 Sqmm nominal area PVC insulated and unsheathed cable single core multistranded, copper conductor in and including steel conduit concealed with all fittings and fixing materials and PVC insulated multistranded copper earth continuity conductor of size 1.5 Sqmm connecting complete all as specified and directed.

Supply & Fix Switch flameproof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed.

Cutting of hole for fixing of exhaust fan complete and making good the disturbed surface complete all as specified and directed.

Supply and fixing of singe phase flame proof Heavy duty exhaust fan of 380mm sweep and having 1440 RPM, 0.25 HP Motor and 2350 CFM with louver complete all as specified and directed.

SCH 'A' PART-X

M&L for glazed ceramic coloured tiles (light shade) of size 350x250x7mm/450x300x7mm thick for work on vertical surface such as skirting, dado, set & jointed neat in cement slurry and pointed in white or coloured cement to match including10 mm thick plaster in CM (1:4) including dismantling of existing tiles and cement mortar bedding complete all as specified and as directed.

S&F tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore complete all a specified and as directed.

Cutting chases for concealed water tubing and making good in CM 1:3 on brick wall cutting n.exc 10 Cm in girth complete all a specified and as directed.

S&F sinks with drainage board made of stainless steel 1mm thick for kitchen with plug washers and waste pipe including bedding in cement mortar, two coat iron fixing bracket of required size and connecting union to pipe over all size 915mm x 460mm bowl size 410mm x 330 mm x 160mm, complete all as specified and as directed.

S&F stainless steel plate rack of size 900x 750 x 250 mm made of 1mm thick stainless steel all as specified and directed.

S&F vitreous china wash hand basin, (white), flat back of size 550x400 mm with and including two CI brackets, brass chromium plated waste coupling fittings and PVC waste pipe complete all as specified and as directed.

S& F 15 mm dia size fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot or Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed.

FREEZCON

J D construction

Bimal Trading Company

M/s. R. K. Trading Company

Kaushik Enterprises

STANDARD ELECTRIC WINDERS

AFTAB ENTERPRISES