Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.0 LAccepted-AOC QRT NO 77 INDIRA COLONY SHIVPURI PARASIA DISTT CHHINDWARA M P | SHIVPURI PARASIA | CHHINDWARA | MADHYA PRADESH | ₹3.0 L | L1 | Accepted-AOC Bidder is L1 and has quoted lowest item rates overall |
| 2 | L2₹3.0 LRejected-Finance EKLEHARA COLONY PO EKLEHARA DISTT CHHINDWARA M P | ₹3.0 L | L2 | Rejected-Finance Quoted higher rate |
| 3 | L3₹3.2 LRejected-Finance | ₹3.2 L | L3 | Rejected-Finance Quoted higher rate |
Tender Value
₹4.1 L
EMD Value
₹5,200
Closing Date
27 Apr 2026, 6:00 pmClosed
Staff Officer (Civil), Pench Area
Staff Officer (Civil), AGM Office, Pench Area, P.O. Parasia, Dist. Chhindwara (M.P.) 480441
Providing aluminum partition (ACP) and associated allied work at STI and Skill Development Centre at PRC/STI under GM Unit of Pench Area.
2026_WCL_358357_1
pe3350-civ-s-e003-2026-27
Open Tender
Civil Works - Buildings
21 days
STI / PRC CHHINDWARA
As Per NIT
3 documents required · 3 mandatory
₹5,200
29 May 2026
15 Apr 2026
28 Apr 2026
15 Apr 2026
27 Apr 2026
16 Apr 2026
15 Apr 2026 - 19 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections ……………...all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :Powder coated aluminium (minimum thickness of powder coating 50 micron). | - | Kg | - | - |
| 2 | Providing and fixing ACP in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With ACP panes of 4.0 mm thickness ( For partation ) | - | Sqm | - | - |
| 3 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : (copper oxidized as per IS: 1378) 300x16 mm | - | Nos | - | - |
| 4 | ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. For 2nd class teak wood and other class of woodshutters | - | nos | - | - |
| 5 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper | - | each | - | - |
| 6 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm | - | each | - | - |
| 7 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. | - | each | - | - |
| 8 | Brick work with clay fly ash F.P.S. (non modular) brick of class designation 3.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand). | - | Cum | - | - |
| 9 | Brick work with clay fly ash F.P.S. (non modular) brick of class designation 3.5 in superstructure above plinth level up to floor one level in: Cement mortar 1:6 (1 cement : 6 coarse sand). | - | Cum | - | - |
| 10 | 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) | - | sqm | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.97 MB
BOQ_371232.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid