REPAIR/ MAINT FALSE CEILING, WALL PENELING, ROLLING SHUTTERS, VENETION BLINDS, MEDICINE CUPBOARDS IN AOR OF AGE B/R AND CERTAIN BLDGS IN AOR OF AGE B/R BHDC UNDER GE (EAST) DELHI CANTT-10

Dismantling of Asbestos cement (corrugated, semi corrugated etc,) sheets in roof coverings etc complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPa as in roof covering / cladding to wall, molding / folding in circular / semicircular of any position and height fixed with self tapping screws as specified, as directed by Engr-in-charge

Description all as per item No 02.00 here in before but plain sheet as in ridge/valley/gutter complete all as specified & as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F mild steel rolled sections, Framed work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, using FE-290 (Gde-E-165) complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and frame work etc complete all as specified and as directed.

S&F Solid PVC Wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame acomplete all as specified and directed.

Providing and fixing PVC fluted wall panels of approved make, design, and shade, made from rigid Polyvinyl Chloride (PVC), extruded with vertical/ribbed/fluted profile, having a panel width 128mm x 18mm with 2mm groove at 14mm pitch, and length as required at site and back of panels are perforted with a nonwoven fabric covering of 0.2mm for providing sound absorption via the accoustic impendance method (confirming to IS 12406 and laminated panel confirming to IS 14587), fixed over a prepared surface using suitable adhesive, screws, or concealed clip system as per manufacturer’s specification. Panels shall be moisture-resistant, termite-proof, fire-retardant . All joints, corners, and terminations shall be finished with matching PVC trims and accessories. Work includes surface preparation, edge finishing, and accessories such as corner profiles, end caps, adhesive, scaffolding, and cleaning of surface after installation, complete in all respects as per drawing and direction of the Engineer-in-Charge.

M&L false ceiling using powder coated grid system of GI modular grid size 600 x 600 mm with runner 38x24x07 mm cross tee 25x24x0.7 mm and wall angle 24x24x7-8 mm thick PVC laminated Gypsum tiles of size 600 x 600 mm of different designs with rear side MPL film fitted in the grid, grid system hanges by 6 mm dia GI wire to purlin, trusses; RCC slab of the roof etc. with hold down clips, butterfly clips, height fixtures etc, complete all as specified and directed.